Yak-List Digest Archive

Sat 05/30/09


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 05:45 AM - Yak-52 Battery Switch Sanity Check (shinden33)
     2. 06:14 AM - Re: Yak-52 Battery Switch Sanity Check (A. Dennis Savarese)
     3. 06:22 AM - Re: Yak-52 Battery Switch Sanity Check (shinden33)
     4. 03:52 PM - Re: Install a GARMIN GPS 296 in a YAK 52 cockpit ? (Yak Pilot)
     5. 05:15 PM - Re: Install a GARMIN GPS 296 in a YAK 52 cockpit ? (Roger Kemp M.D.)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:45:42 AM PST US
    Subject: Yak-52 Battery Switch Sanity Check
    From: "shinden33" <scott.t.glaser@gmail.com>
    All, Sanity Check needed. Yak-52 battery switch terminals (on the back, not switch position): Top- external Mid - Off/ground? Bot- battery Is this correct? Scott N8252 -------- The Defiant Company www.thedefiantcompany.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=246016#246016


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:14:08 AM PST US
    From: "A. Dennis Savarese" <dsavarese0812@bellsouth.net>
    Subject: Re: Yak-52 Battery Switch Sanity Check
    Scott, Looking at the back of the battery switch, the top section where the buss bar is located, is the BATTERY side when you have the battery switch in the UP position on the front. Put your volt meter on the buss bar, flip the battery switch to the UP position and you should read the battery voltage. Dennis ----- Original Message ----- From: shinden33 To: yak-list@matronics.com Sent: Saturday, May 30, 2009 7:44 AM Subject: Yak-List: Yak-52 Battery Switch Sanity Check All, Sanity Check needed. Yak-52 battery switch terminals (on the back, not switch position): Top- external Mid - Off/ground? Bot- battery Is this correct? Scott N8252 -------- The Defiant Company www.thedefiantcompany.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=246016#246016


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:22:25 AM PST US
    Subject: Re: Yak-52 Battery Switch Sanity Check
    From: "shinden33" <scott.t.glaser@gmail.com>
    Thanks! -------- The Defiant Company www.thedefiantcompany.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=246020#246020


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:52:55 PM PST US
    From: Yak Pilot <yakplt@yahoo.com>
    Subject: Re: Install a GARMIN GPS 296 in a YAK 52 cockpit ?
    Bought N66PW.- =0A=0AMark=0A=0A=0A-=0A=0A=0A=0A________________________ ________=0AFrom: Roger Kemp M.D. <viperdoc@mindspring.com>=0ATo: yak-list@m atronics.com=0ASent: Monday, May 18, 2009 7:05:44 PM=0ASubject: RE: Yak-Lis t: Install a GARMIN GPS 296 in a YAK 52 cockpit ?=0A=0A--> Yak-List message posted by: "Roger Kemp M.D." <viperdoc@mindspring.com>=0A=0AI mounted my 2 95 initially (now changed to 396) to the ventilation tube=0Abetween my legs . I used a RAM-B-108 base with strap clamp (P/N 11-02003) to=0Aattach the b all base to the side of the tube. I then used the RAM-B-138-GAZ=0A(P/N 11-0 1766) to mount the ball clamp parallel to the tube with Garmin=0Asitting in front of the flat plate on the vent tube. I bought the mounts=0Afrom Aircr aft Spruce. =0AHope this helps.=0ADoc=0A=0A-----Original Message-----=0AFro m: owner-yak-list-server@matronics.com=0A[mailto:owner-yak-list-server@matr onics.com] On Behalf Of vincent=0ASent: Sunday, May 17, 2009 4:27 PM=0ATo: yak-list@matronics.com=0ASubject: Yak-List: Install a GARMIN GPS 296 in a Y ollmannsberger@wanadoo.fr>=0A=0ASomeone had an idea where to install a garm in GPS 296 in a yak 52 cockpit ?=0A=0A=0A=0A=0ARead this topic online here: =0A=0Ahttp://forums.matronics.com/viewtopic.php?p=244419#244419=0A=0A=0A ====================


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:15:04 PM PST US
    From: "Roger Kemp M.D." <viperdoc@mindspring.com>
    Subject: Install a GARMIN GPS 296 in a YAK 52 cockpit ?
    You did! Cool. Let me know when you are going to tooling through central Al if you are going to go back to NC across the lower US. Doc From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak Pilot Sent: Saturday, May 30, 2009 5:52 PM Subject: Re: Yak-List: Install a GARMIN GPS 296 in a YAK 52 cockpit ? Bought N66PW. Mark _____ From: Roger Kemp M.D. <viperdoc@mindspring.com> Sent: Monday, May 18, 2009 7:05:44 PM Subject: RE: Yak-List: Install a GARMIN GPS 296 in a YAK 52 cockpit ? I mounted my 295 initially (now changed to 396) to the ventilation tube between my legs. I used a RAM-B-108 base with strap clamp (P/N 11-02003) to attach the ball base to the side of the tube. I then used the RAM-B-138-GAZ (P/N 11-01766) to mount the ball clamp parallel to the tube with Garmin sitting in front of the flat plate on the vent tube. I bought the mounts from Aircraft Spruce. Hope this helps. Doc -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of vincent Sent: Sunday, May 17, 2009 4:27 PM Subject: Yak-List: Install a GARMIN GPS 296 in a YAK 52 cockpit ? <vincent.kollmannsberger@wanadoo.fr> Someone had an idea where to install a garmin GPS 296 in a yak 52 cockpit ? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=244419#244419




    Other Matronics Email List Services

  • Post A New Message
  •   yak-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Yak-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/yak-list
  • Browse Yak-List Digests
  •   http://www.matronics.com/digest/yak-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --