Today's Message Index:
----------------------
1. 01:51 AM - FW: M-14P After landing oil Pressure acceptable values (Richard Goode)
2. 04:18 AM - Ernie's Hanger-home (Craig Payne)
3. 09:52 AM - Re: Leeward Home for Sale (Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E)
4. 10:23 AM - My previous post. (Ernest Martinez)
5. 10:52 AM - DO NOT ARCHIVE (Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E)
6. 11:12 AM - Re: DO NOT ARCHIVE (Ernest Martinez)
7. 11:13 AM - Re: My previous post. (psb777)
8. 11:22 AM - DO NOT ARCHIVE (Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E)
9. 12:05 PM - Re: Re: My previous post. (Ernest Martinez)
10. 02:36 PM - Re: Re: My previous post. (Yak Pilot)
11. 02:58 PM - Garmin 496 power cable (doug sapp)
12. 03:20 PM - Re: Garmin 496 power cable (Warren Hill)
13. 03:50 PM - Re: Garmin 496 power cable (Kregg Victory)
14. 04:08 PM - Re: Garmin 496 power cable (doug sapp)
15. 04:14 PM - Re: Garmin 496 power cable (doug sapp)
16. 04:37 PM - Re: Garmin 496 power cable (Warren Hill)
17. 05:19 PM - Re: Garmin 496 power cable (Kregg Victory)
18. 06:13 PM - Re: Garmin 496 power cable (doug sapp)
19. 06:17 PM - Re: Garmin 496 power cable (KingCJ6@aol.com)
20. 07:53 PM - DO NOT ARCHIVE (Yak Pilot)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | M-14P After landing oil Pressure acceptable values |
Same as in flight-that is 1 bar at idle and 4 bar while flying.[Multiply by
16 for p.s.i.]
Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Hereford
HR5 3LW
United Kingdom
Tel: +44 (0) 1544 340120
Fax: +44 (0) 1544 340129
www.russianaeros.com
I'm currently in Sri Lanka but this Mail is working,and my local phone is
+94 779 132 160.
----- Original Message -----
From: Javier Carrasco <mailto:javiercarrascob@yahoo.com>
Sent: Wednesday, August 12, 2009 8:16 AM
Subject: Yak-List: M-14P After landing oil Pressure acceptable values
Hello Guys,
Open Question: Does anybody knows what are the minimum values for oil
pressure on an m-14p in a conventional gear plane, after landing?
There is nowhere in my manuals that I can find that... and the values are
going into the yellow arc very low.
Thanks.
--------------------------------------------------
This message has been scanned for viruses and
dangerous content by the Invictawiz MailScanner
and is believed to be clean.
<http://www.invictawiz.com/> http://www.invictawiz.com/
--------------------------------------------------
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Ernie's Hanger-home |
Heh Ernie, I'd buy it if I could just only:
(1) sell my house
(2) find enough money for the difference
(3) convince my wife to move that far North up in the boonies
Seriously folks, Ernie has a great place for a pilot with toys, I know I stayed
there a few times. 6000' x 300' of turf runway at Leeward Ranch and plenty of
colorful aviation prople.
Craig Payne
cpayne@joimail.com
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Leeward Home for Sale |
Walt,
Short answer:
No, I do not think I owe Ernie (or you) an apology and it will not be
forthcoming.
Long answer:
I feel that your response is disturbing as well. Feel free to report my
actions if you feel so inclined. I suggest that if you were honestly
concerned about the matter, we could have talked about it off-line, but
here we are anyway. So let's just yank Pandora's Box wide open.
I do not own this list server, but I have tried (with a few notable
exceptions) to keep away from non-aircraft discussions.
Further, there is no "Good Ole Boy" network on the YAK List Walt. RPA
maybe, YAK LIST... NO. Guess what? I am also a long time member of
the YAK List. More than one YAK List member has publically pointed out
TO ME, that what I happened to be talking about should not have been a
topic for the YAK list. And guess what? They were right! I stepped
over the line... More than once. So if you want to say that this is a
case of the pot calling the kettle black, I will agree. I am not lily
white and I have screwed up more than once on the YAK list talking about
things that had no business being talked about via this forum. For
that, I do apologize, fervently and profusely.
That said, we have all seen where various members on the YAK list have
mentioned or advertised products that they sell for profit. Maybe not
MUCH profit (thanks folks), but still a profit. We look the other way
on this, because these parts are intended for our aircraft. There is a
fine line there.
Having been chastised myself, I have developed rather strong feelings
about what should and should not be posted to this list. Personally, I
think certain postings concerning the RPA go over that line, and have
said so personally to the people posting them, but not in public. But
some things Walt are so clearly beyond even consideration that it amazes
me that anyone would even think of posting them here.
Examples are:
Selling you car here.
Selling your home here.
Advertising something not related to our aircraft.
~Selling your real estate~!
The list goes on, but is pretty darn obvious.
If you feel that my reply to Ernie was out of line, I will be glad to
just write up an official complaint about his posting (and my reply) to
Matt and let him take it for action. Clearly folks, this is not the
place to be selling your real estate.
Walt, neither of you will get an apology from me. Instead I will
publically admonish anyone who uses the YAK list as a means to sell
their personal real estate at any time. Like I said, please feel free
to complain to Matt that I said that to all concerned. If he tells me
it is OK to advertise real estate on the YAK list, (because maybe a YAK
can land on it?) then I will be glad to offer a public apology to you
and Ernie.
Failing that, I will say that it was a stupid thing to do, Ernie should
apologize for doing it, and I don't think he needs you to defend him
Walt. As far as I am concerned it is over and done with. You want to
run it up the flag pole, you darn well know I will stand behind my guns
on an issue like this. Take your best shot, or let it go and be done
with it.
Your call.
Mark Bitterlich
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Walter Lannon
Sent: Tuesday, August 11, 2009 11:45 PM
Subject: Re: Yak-List: Leeward Home for Sale
Mark;
I find your response to Ernie's message more than a little disturbing.
The message you quote from Ernie "Gee Wizz Air Ranch Home for Sale in
Bumstead Fl" is obviously a fake. It is nowhere to be found in the Yak
List Archives.
The real message was "Leeward Air Ranch Home for sale in Ocala Fl."
I would hope that Matt Dralle would look into this and take whatever
action is appropriate.
Ernie Martinez is a long time, respected, member of this list. he was
advising FLYING members that an airport home is for sale.
If that was a transgression it was a damn small one and pales in
comparison to your own diatribes on muscle cars.
You also seem to have no problem with certain other members diatribes on
guns and outright political garbage.
I believe you owe Ernie a public apology.
Walt Lannon
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | My previous post. |
Hey guys, I kind of missed the thread that was started by my previous
post since I haven't been subscribed in a while. I caught the gist
from the Web Archive,
First I'd like to thank Craig and Walt for their kind words.
As far as my post is concerned. This is copied directly from Matt's list rules.
"Occasional posts by vendors or individuals who are regularly
subscribed to a given List are considered acceptable. Posts by
List members promoting their respective products or items for sale
should be of a friendly, informal nature, and should not resemble
a typical SPAM message. The List isn't about commercialism, but
is about sharing information and knowledge. This applies to
everyone, including those who provide products to the entire
community. Informal presentation and moderation should be the
operatives with respect to advertising on the Lists."
Nice to be back amongst friends :) You too Mark.
Ernie
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
DO NOT ARCHIVE
TO ALL CONCERNED:
Ok.
I am going to do a 180 degree turn here.
I am sometimes less than bright and miss a good thing when I see it.
First, Ernie... You're a good guy, I like you, and think the world of
you. I mean that. No kidding. You don't have to dislike a person just
because you happen to disagree with his viewpoint(s). It was never
meant as a personal attack. I mean that. Walt, I think you should have
written me off-line, but hey you were protecting your buddy and felt his
honor was slighted... If you want to be his "second" at the duel, we're
good to go on that. .45's at 12 paces ok?
Yes, I read the exact same words you did, but I guess it is all in the
interpretation.
So... In public I would like to apologize to Walt and to Ernie. You
both have my sincere apology.
Now... That said:
Hey Doc, what do you think about Obama's Health Plan and how it will
impact our ability to retain our pilot medical certificates?
And Doc, do you think we might no longer be able to carry our handguns
from state to state in our YAKS now that that last state carry law was
defeated?
Yak List Readers: I have a whole list of stuff I was going to put on
EBay for sale, but will start here first. Keep your eyes open for good
deals. You'll see it here first.
I never want to ever... EVER here again how anything being talked about
is not a topic for this list server. I also NEVER want to hear again
how anything I might put here for sale is inappropriate. We'll start
with a box of sex toys I found in an old house next door. Real
Antiques.
Where do we draw the line? There is no line.
And yep.. My tongue is in my cheek.
Have a nice day!
Mark
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Ernest
Martinez
Sent: Wednesday, August 12, 2009 1:23 PM
Subject: Yak-List: My previous post.
Hey guys, I kind of missed the thread that was started by my previous
post since I haven't been subscribed in a while. I caught the gist from
the Web Archive,
First I'd like to thank Craig and Walt for their kind words.
As far as my post is concerned. This is copied directly from Matt's list
rules.
"Occasional posts by vendors or individuals who are regularly
subscribed to a given List are considered acceptable. Posts by
List members promoting their respective products or items for sale
should be of a friendly, informal nature, and should not resemble
a typical SPAM message. The List isn't about commercialism, but
is about sharing information and knowledge. This applies to
everyone, including those who provide products to the entire
community. Informal presentation and moderation should be the
operatives with respect to advertising on the Lists."
Nice to be back amongst friends :) You too Mark.
Ernie
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: DO NOT ARCHIVE |
DO NOT ARCHIVE
No problem Mark.
But since we're on topic here. Didn't I buy a power supply off of you
several years back off this list :)
Ernie
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: My previous post. |
Also from the rules:
"The purpose of the Yak-List is to provide a forum of discussion for
things related to this particular discussion group."
"Please keep all posts related to the List at some level."
"THINK carefully before you write. Ask yourself if your post will be
relevant to everyone. If you have to wonder about that, DON'T send it."
This is a very useful list for flyers of Yak a/c. Discussions re marines vs air
force; immigration; gun control; muscle cars OR REAL ESTATE do not satisfy the
criteria for inclusion in the list.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=257323#257323
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Yep and you stole that sucker. Still work? (and yo, it was never advertised on
the Yak list! :-)
Mark
-----Original Message-----
From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Ernest Martinez
Sent: Wednesday, August 12, 2009 2:07 PM
Subject: Re: Yak-List: DO NOT ARCHIVE
DO NOT ARCHIVE
No problem Mark.
But since we're on topic here. Didn't I buy a power supply off of you several years
back off this list :)
Ernie
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: My previous post. |
DO NOT ARCHIVE
I think my Air Park home with an AIRCRAFT HANGAR and a RUNWAY (read
airplane related) for sale is just as relevant to this list as is a
set of spark plugs or a case of Marvel Mystery Oil or an airplane for
sale. You can land (well you can't, you're not invited) yak-list type
airplanes, or even host all the RPA planes from Sun & Fun (which has
been done for many years) at this air park. Many folks on this list
have been to my home, and some have expressed an interest in
purchasing said home. I also believe my post was very small, to the
point, and I did ask that people not respond to the post on this list,
but contact me directly. I think this topic is well worn out.
Ernie
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: My previous post. |
DO NOT ARCHIVE
--
Roger that Ernie.
-
I can land a helicopter on my front lawn, so it qualifies as well.--
-
My lawn tractor can mow runways, as can my bush-hog... anyone interested?
- They're for sale.--My bulldozer was used to MAKE a runway, so it al
so qualifies.- And of course the spare hydraulic hoses are part of the bu
lldozer... they're for sale too, as it the hose kit that makes them.-
-
My ex-wife hated every second of it.- You can have her for free.- In fa
ct you might already have.-
-
This- topic was indeed worn out. Walt fired it up again.- Now you jumpe
d on the bandwagon as well.- Go figure.-
-
Have at it.... as far as I am concerned the next person that tells me-wha
t I choose to discuss (or sell) is "off topic" can go straight to .......
-your air-park... and purchase same.- :-)
-
Later dude,
-
Mark
--- On Wed, 8/12/09, Ernest Martinez <erniel29@gmail.com> wrote:
DO NOT ARCHIVE
I think my Air Park home with an AIRCRAFT HANGAR and a RUNWAY (read
airplane related) for sale is just as relevant to this list as is a
set of spark plugs or a case of Marvel Mystery Oil or an airplane for
sale. You can land (well you can't, you're not invited) yak-list type
airplanes, or even host all the RPA planes from Sun & Fun (which has
been done for many years) at this air park. Many folks on this list
have been to my home, and some have expressed an interest in
purchasing said home. I also believe my post was very small, to the
point, and I did ask that people not respond to the post on this list,
but contact me directly. I think this topic is well worn out.
Ernie
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Garmin 496 power cable |
Guys, anyone out there have a power cable to fit a Garmin 496? Bought one
on Ebay but unfortunately the end which plugs into the GPS looks like it has
been stepped on! It was also without a operators manual. Any help would
be appreciated.
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin 496 power cable |
Doug,
I have an extra 117 v power cable that I can send you for the Garmin
496.
Warren Hill
Mesa, Arizona
On Aug 12, 2009, at 2:49 PM, doug sapp wrote:
> Guys, anyone out there have a power cable to fit a Garmin 496?
> Bought one on Ebay but unfortunately the end which plugs into the
> GPS looks like it has been stepped on! It was also without a
> operators manual. Any help would be appreciated.
>
> --
> Always Yakin,
> Doug Sapp
> Phone 509-826-4610
> Fax 509-826-3644
>
>
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Garmin 496 power cable |
Doug, I have a power cable. But if you are going to connect the data cable
make sure you get a data cable.
Kregg Victory
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of doug sapp
Sent: Wednesday, August 12, 2009 2:50 PM
Subject: Yak-List: Garmin 496 power cable
Guys, anyone out there have a power cable to fit a Garmin 496? Bought one
on Ebay but unfortunately the end which plugs into the GPS looks like it has
been stepped on! It was also without a operators manual. Any help would
be appreciated.
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin 496 power cable |
Kergg, the damaged "power cable" has a cig. type power plug with a speaker
built into it on one end and a very squashed 90 degree male plug in on the
other. I basically need something to power up the unit in the aircraft. I
thought about going to a good elec shop and matching up the damaged plug
but unfortunately there is not enough left of it to ID.
Thanks for the help,
Doug
On Wed, Aug 12, 2009 at 3:47 PM, Kregg Victory <kregg@balancemyprop.com>wrote:
> Doug, I have a power cable. But if you are going to connect the data
> cable make sure you get a data cable.
>
>
> Kregg Victory
>
>
> *From:* owner-yak-list-server@matronics.com [mailto:
> owner-yak-list-server@matronics.com] *On Behalf Of *doug sapp
> *Sent:* Wednesday, August 12, 2009 2:50 PM
>
> *To:* yak-list@matronics.com
> *Subject:* Yak-List: Garmin 496 power cable
>
>
> Guys, anyone out there have a power cable to fit a Garmin 496? Bought one
> on Ebay but unfortunately the end which plugs into the GPS looks like it has
> been stepped on! It was also without a operators manual. Any help would
> be appreciated.
>
>
> --
> Always Yakin,
> Doug Sapp
> Phone 509-826-4610
> Fax 509-826-3644
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/Navigator?Yak-List*
>
> **
>
> **
>
> **
>
> *http://forums.matronics.com*
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> **
>
> * *
>
> *
>
> *
>
>
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin 496 power cable |
Warren,Thanks! Yes please send it! Please put a note in with it so I can
get you paid. Thanks again.
Always Yakin,
Doug Sapp
18B Riverview Road
Omak, WA 98841
509-826-4610
On Wed, Aug 12, 2009 at 3:12 PM, Warren Hill <k7wx@earthlink.net> wrote:
>
> Doug,
>
> I have an extra 117 v power cable that I can send you for the Garmin 496.
>
> Warren Hill
> Mesa, Arizona
>
>
> On Aug 12, 2009, at 2:49 PM, doug sapp wrote:
>
> Guys, anyone out there have a power cable to fit a Garmin 496? Bought one
>> on Ebay but unfortunately the end which plugs into the GPS looks like it has
>> been stepped on! It was also without a operators manual. Any help would
>> be appreciated.
>>
>> --
>> Always Yakin,
>> Doug Sapp
>> Phone 509-826-4610
>> Fax 509-826-3644
>>
>>
>>
>>
>
>
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin 496 power cable |
Doug,
I also have an extra one of those very unusual looking 12-volt
adaptors with the in-line speaker that I never use with my 496. Will
send you both. When I sold my 396, the buyer did not need power
adaptors, so I have several as extras that I will never use. No need
to pay me for them. Will send them tomorrow.
Warren Hill
Mesa, Arizona
On Aug 12, 2009, at 4:12 PM, doug sapp wrote:
> Warren,
> Thanks! Yes please send it! Please put a note in with it so I can
> get you paid. Thanks again.
>
> Always Yakin,
> Doug Sapp
> 18B Riverview Road
> Omak, WA 98841
>
> 509-826-4610
>
> On Wed, Aug 12, 2009 at 3:12 PM, Warren Hill <k7wx@earthlink.net>
> wrote:
>
> Doug,
>
> I have an extra 117 v power cable that I can send you for the Garmin
> 496.
>
> Warren Hill
> Mesa, Arizona
>
>
> On Aug 12, 2009, at 2:49 PM, doug sapp wrote:
>
> Guys, anyone out there have a power cable to fit a Garmin 496?
> Bought one on Ebay but unfortunately the end which plugs into the
> GPS looks like it has been stepped on! It was also without a
> operators manual. Any help would be appreciated.
>
> --
> Always Yakin,
> Doug Sapp
> Phone 509-826-4610
> Fax 509-826-3644
>
>
> ==========
> rget="_blank">http://www.matronics.com/Navigator?Yak-List
> ==========
> http://forums.matronics.com
> ==========
> le, List Admin.
> ="_blank">http://www.matronics.com/contribution
> ==========
>
>
> --
> Always Yakin,
> Doug Sapp
> Phone 509-826-4610
> Fax 509-826-3644
>
>
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Garmin 496 power cable |
I have the one with the speaker on it if you need it?
Kregg
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of doug sapp
Sent: Wednesday, August 12, 2009 4:06 PM
Subject: Re: Yak-List: Garmin 496 power cable
Kergg, the damaged "power cable" has a cig. type power plug with a speaker
built into it on one end and a very squashed 90 degree male plug in on the
other. I basically need something to power up the unit in the aircraft. I
thought about going to a good elec shop and matching up the damaged plug but
unfortunately there is not enough left of it to ID.
Thanks for the help,
Doug
On Wed, Aug 12, 2009 at 3:47 PM, Kregg Victory <kregg@balancemyprop.com>
wrote:
Doug, I have a power cable. But if you are going to connect the data cable
make sure you get a data cable.
Kregg Victory
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of doug sapp
Sent: Wednesday, August 12, 2009 2:50 PM
Subject: Yak-List: Garmin 496 power cable
Guys, anyone out there have a power cable to fit a Garmin 496? Bought one
on Ebay but unfortunately the end which plugs into the GPS looks like it has
been stepped on! It was also without a operators manual. Any help would
be appreciated.
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
http://www.matronics.com/Navigator?Yak-List
http://forums.matronics.com
http://www.matronics.com/contribution
et="_blank">http://www.matronics.com/Navigator?Yak-List
a>http://forums.matronics.com
_blank">http://www.matronics.com/contribution
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin 496 power cable |
Kregg,Thanks but Warren is sending one, but thanks for the offer, this list
is the best thing since sliced bread!!
Many thanks to everyone who responded!
Hey Dave King, page 152 of 196 just cleared the printer....ARGH!
Doug
On Wed, Aug 12, 2009 at 5:14 PM, Kregg Victory <kregg@balancemyprop.com>wrote:
> I have the one with the speaker on it if you need it?
>
>
> Kregg
>
>
> *From:* owner-yak-list-server@matronics.com [mailto:
> owner-yak-list-server@matronics.com] *On Behalf Of *doug sapp
> *Sent:* Wednesday, August 12, 2009 4:06 PM
>
> *To:* yak-list@matronics.com
> *Subject:* Re: Yak-List: Garmin 496 power cable
>
>
> Kergg, the damaged "power cable" has a cig. type power plug with a speaker
> built into it on one end and a very squashed 90 degree male plug in on the
> other. I basically need something to power up the unit in the aircraft. I
> thought about going to a good elec shop and matching up the damaged plug
> but unfortunately there is not enough left of it to ID.
>
>
> Thanks for the help,
>
> Doug
>
>
> On Wed, Aug 12, 2009 at 3:47 PM, Kregg Victory <kregg@balancemyprop.com>
> wrote:
>
> Doug, I have a power cable. But if you are going to connect the data
> cable make sure you get a data cable.
>
>
> Kregg Victory
>
>
> *From:* owner-yak-list-server@matronics.com [mailto:
> owner-yak-list-server@matronics.com] *On Behalf Of *doug sapp
> *Sent:* Wednesday, August 12, 2009 2:50 PM
>
>
> *To:* yak-list@matronics.com
>
> *Subject:* Yak-List: Garmin 496 power cable
>
>
> Guys, anyone out there have a power cable to fit a Garmin 496? Bought one
> on Ebay but unfortunately the end which plugs into the GPS looks like it has
> been stepped on! It was also without a operators manual. Any help would
> be appreciated.
>
>
> --
> Always Yakin,
> Doug Sapp
> Phone 509-826-4610
> Fax 509-826-3644
>
> * *
>
> * *
>
> *http://www.matronics.com/Navigator?Yak-List*
>
> *http://forums.matronics.com*
>
> *http://www.matronics.com/contribution*
>
> * *
>
> * *
>
> * *
>
> *et="_blank">http://www.matronics.com/Navigator?Yak-List*
>
> *a>http://forums.matronics.com*
>
> *_blank">http://www.matronics.com/contribution*
>
> * *
>
>
> --
> Always Yakin,
> Doug Sapp
> Phone 509-826-4610
> Fax 509-826-3644
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/Navigator?Yak-List*
>
> **
>
> **
>
> **
>
> *http://forums.matronics.com*
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> **
>
> * *
>
> *
>
>
> *
>
>
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin 496 power cable |
One word: "laser"
In a message dated 8/12/2009 6:14:27 P.M. Pacific Daylight Time,
dougsappllc@gmail.com writes:
Kregg,
Thanks but Warren is sending one, but thanks for the offer, this list is
the best thing since sliced bread!!
Many thanks to everyone who responded!
Hey Dave King, page 152 of 196 just cleared the printer....ARGH!
Doug
On Wed, Aug 12, 2009 at 5:14 PM, Kregg Victory <_kregg@balancemyprop.com_
(mailto:kregg@balancemyprop.com) > wrote:
I have the one with the speaker on it if you need it?
Kregg
From: _owner-yak-list-server@matronics.com_
(mailto:owner-yak-list-server@matronics.com) [mailto:_owner-yak-list-server@matronics.com_
(mailto:owner-yak-list-server@matronics.com) ] On Behalf Of doug sapp
Sent: Wednesday, August 12, 2009 4:06 PM
Subject: Re: Yak-List: Garmin 496 power cable
Kergg, the damaged "power cable" has a cig. type power plug with a speaker
built into it on one end and a very squashed 90 degree male plug in on the
other. I basically need something to power up the unit in the aircraft.
I thought about going to a good elec shop and matching up the damaged plug
but unfortunately there is not enough left of it to ID.
Thanks for the help,
Doug
On Wed, Aug 12, 2009 at 3:47 PM, Kregg Victory <_kregg@balancemyprop.com_
(mailto:kregg@balancemyprop.com) > wrote:
Doug, I have a power cable. But if you are going to connect the data
cable make sure you get a data cable.
Kregg Victory
From: _owner-yak-list-server@matronics.com_
(mailto:owner-yak-list-server@matronics.com) [mailto:_owner-yak-list-server@matronics.com_
(mailto:owner-yak-list-server@matronics.com) ] On Behalf Of doug sapp
Sent: Wednesday, August 12, 2009 2:50 PM
Subject: Yak-List: Garmin 496 power cable
Guys, anyone out there have a power cable to fit a Garmin 496? Bought one
on Ebay but unfortunately the end which plugs into the GPS looks like it
has been stepped on! It was also without a operators manual. Any help
would be appreciated.
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
_http://www.matronics.com/Navigator?Yak-List_
(http://www.matronics.com/Navigator?Yak-List)
_http://forums.matronics.com_ (http://forums.matronics.com/)
_http://www.matronics.com/contribution_
(http://www.matronics.com/contribution)
et="_blank">_http://www.matronics.com/Navigator?Yak-List_
(http://www.matronics.com/Navigator?Yak-List)
a>_http://forums.matronics.com_ (http://forums.matronics.com/)
_blank">_http://www.matronics.com/contribution_
(http://www.matronics.com/contribution)
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
_http://www.matronics.com/Navigator?Yak-List_
(http://www.matronics.com/Navigator?Yak-List)
_http://forums.matronics.com_ (http://forums.matronics.com/)
_http://www.matronics.com/contribution_
(http://www.matronics.com/contribution)
et="_blank">
_http://www.matronics.com/Navigator?Yak-List_
(http://www.matronics.com/Navigator?Yak-List)
a>_http://forums.matronics.com_ (http://forums.matronics.com/) _blank">
_http://www.matronics.com/contribution_
(http://www.matronics.com/contribution)
--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
(http://www.matronics.com/Navigator?Yak-List)
(http://www.matronics.com/contribution)
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
DO NOT ARCHIVE
-
-
-
Roger that Ernie.
-
I can land a helicopter on my front lawn, so it qualifies as well.--
-
My lawn tractor can mow runways, as can my bush-hog... anyone interested?
- They're for sale.--My bulldozer was used to MAKE a runway, it also
qualifies.- And of course the spare hydraulic hoses are part of the bulld
ozer... they're for sale too, as it the hose kit that makes them.-
-
My ex-wife hated every second of it.- You can have her for free.- In fa
ct you might already have.-
-
This- topic was indeed worn out. Walt fired it up again.- Now you jumpe
d on the bandwagon as well.- Go figure.-
-
Have at it.... as far as I am concerned the next person that tells me-wha
t I choose to discuss (or sell) is "off topic" can go straight to your air-
park... and purchase same.- :-)
-
Later dude,
-
Mark
-
-
-
-
-
-
-
-
--- On Wed, 8/12/09, Ernest Martinez <erniel29@gmail.com> wrote:
DO NOT ARCHIVE
I think my Air Park home with an AIRCRAFT HANGAR and a RUNWAY (read
airplane related) for sale is just as relevant to this list as is a
set of spark plugs or a case of Marvel Mystery Oil or an airplane for
sale. You can land (well you can't, you're not invited) yak-list type
airplanes, or even host all the RPA planes from Sun & Fun (which has
been done for many years) at this air park. Many folks on this list
have been to my home, and some have expressed an interest in
purchasing said home. I also believe my post was very small, to the
point, and I did ask that people not respond to the post on this list,
but contact me directly. I think this topic is well worn out.
Ernie
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|