Today's Message Index:
----------------------
1. 03:19 PM - Rudder Pedal extensions for Yak-52, strut adapters (Barry Hancock)
2. 08:40 PM - Yak 52/55/18T Shutters & Ring (Byron Fox)
3. 09:10 PM - Re: Yak 52/55/18T Shutters & Ring (cjpilot710@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Rudder Pedal extensions for Yak-52, strut adapters |
Gang,
Below is a message from a customer with a Yak-52. While there are
some models that these brackets are not suitable for due to
interference from items on the firewall, it appears as though some
Yak-52s will accept the brackets just fine (see below). If you are
interested in these for your Yak-52, we will provide a money back
guarantee. If you buy them and they don't fit, return them within 30
days for a full refund. Price on the set is still $250 (one set per
cockpit).
We also just received our latest batch of strut adapters. No more
messing with valve the Russian strut valves. Screw the old ones out,
screw our new ones in, safety wire, repressurize, and now you can
fill your struts with a standard US fitting. Price is $125 for the
full set (3 adapters, 3 schrader valves).
Please email me off list with more questions or to process your order.
Happy Flying,
Barry
> Barry,
>
> Just finished installing my new pedals in my Yak 52 (1980). I
> installed them in the front and gained 3 or so inches. I've flown
> maybe 2 hrs so far and love the extra room as well as the extra
> width apart gives me more mechanical advantage. I attached 2
> photos to show you the installation. FYI: The pedals are at least
> 3" away from anything on the firewall, no issues at all fore/aft or
> to the sides. My firewall is standard and untouched as far as I
> know. Great tooling on your pedals, thanks again.
>
> Don
>
> Captain Don Hopkin
> N6868Y
Barry Hancock
Worldwide Warbirds, Inc.
www.worldwidewarbirds.com
(909) 606-4444 office
(949) 300-5510 cell
"The complete center for warbird excellence"
Express Mailing address:
7000 Merrill Ave, B-110, Unit J
Chino, CA 91710
Regular Mailing address:
7000 Merrill Ave., Box 91
Chino, CA 91710
The information contained in this e-mail message is intended only for
the personal and confidential use of the designated recipients. If
the reader of this message is not an intended recipient, you are
hereby notified that any review, use, dissemination, forwarding or
copying of this message is strictly prohibited. Please notify us
immediately by reply e-mail or telephone, and delete the original
message and all attachments from your system. Thank you
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Yak 52/55/18T Shutters & Ring |
For our M14P conversion, we're hunting for Yak 52,55 or 18T shutters
and ring. Please contact me off-line. Thanks, Blitz
415-307-2405
Sent from my iPhone
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak 52/55/18T Shutters & Ring |
In a message dated 9/15/2009 11:40:53 P.M. Eastern Daylight Time,
byronmfox@gmail.com writes:
Me too! !
My system's is worn out. I need the two rings that rotate the fins. The
fins are fine and the outside ring is good too. But two inter rings are
bad.
I am trying to have them tig welded to build up metal in the worn out
areas. I'll than grain and re-drill them back to specks. But if there is some
parts out,
I'm open off the list.
Jim "Pappy" Goolsby
--> Yak-List message posted by: Byron Fox <byronmfox@gmail.com>
For our M14P conversion, we're hunting for Yak 52,55 or 18T shutters
and ring. Please contact me off-line. Thanks, Blitz
415-307-2405
Sent from my iPhone
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|