---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 12/15/09: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:23 AM - Re: Brit Saves YAK 52 with jammed elevator (Roger Kemp M.D.) 2. 08:55 AM - landing light replacement (Bill1200) 3. 11:20 AM - Re: landing light replacement (A. Dennis Savarese) 4. 11:58 AM - Re: Parts needed (doug sapp) 5. 12:05 PM - Re: landing light replacement (Bill1200) 6. 03:19 PM - Re: Parts needed (Cpayne) ________________________________ Message 1 _____________________________________ Time: 05:23:44 AM PST US From: "Roger Kemp M.D." Subject: RE: Yak-List: Brit Saves YAK 52 with jammed elevator Mike, Thank you for the correction and the update. As suspected errant FOD. Doc Kemp -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Mike Beresford Sent: Tuesday, December 15, 2009 12:03 AM Subject: RE: Yak-List: Brit Saves YAK 52 with jammed elevator Hi all I'm not sure Bob is a Brit - as far as I know he is South African. The accident happened in Bisho, Eastern Cape, South Africa. Bob is one of the characters of local aviation, a very experienced aerobatic pilot and instructor. One of the knobs on the gill control levers went walkabout several months back, and was replacd by the owner. Despite a search of the aircraft the missing one was not found - until now. We're all pleased that the outcome was not a fatal accident - it was very close. It's been a very bad week for aviation here - airline over-run, a light aircraft over-run, and an Extra down on Sunday with two fatalities. Blue skies Mike ________________________________ Message 2 _____________________________________ Time: 08:55:11 AM PST US Subject: Yak-List: landing light replacement From: "Bill1200" Recently found out about the technique of hollowing out the existing light bulb and then using the core as receptacle for American bulb. Don't know the bulb size though??? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=277628#277628 ________________________________ Message 3 _____________________________________ Time: 11:20:58 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: landing light replacement If you are speaking of the Yak 52 bulbs, you can use a #327 28 volt bulb. However, the Osram 3899 is a direct replacement for the original Russian bulbs (gear and flaps). Dennis ----- Original Message ----- From: Bill1200 To: yak-list@matronics.com Sent: Tuesday, December 15, 2009 10:54 AM Subject: Yak-List: landing light replacement Recently found out about the technique of hollowing out the existing light bulb and then using the core as receptacle for American bulb. Don't know the bulb size though??? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=277628#277628 ________________________________ Message 4 _____________________________________ Time: 11:58:11 AM PST US Subject: Re: Yak-List: Parts needed From: doug sapp Mark, I have been told that the oil transfer tube is different J9-G1 to V530 prop (it's longer I think), so I don't think I can help. No idea as to the filter. I have them by the gross for the stock Russian or Chinese air compressor, but none like you describe. Sorry. On Mon, Dec 14, 2009 at 9:38 AM, Yak Pilot wrote: > > > Wish to purchase: > > M-14 propeller oil tube: This tube screws into the front of the engine and > is what provides the oil to the hub in order to change prop pitch. Not > sure if the same part is used on a Housai, but if it is..... Doug? > > Sukhoi Compessor Filter Parts: On the Suke, you have a stainless steel box > on the firewall. Inside of it are filters that slide onto a triangular > shaft. Need the triangular shaft and the filters. > > Please contact me at: > > markbitterlich@embarqmail.com or > > yakplt@yahoo.com > > If you have these parts, or think you might know where to get them. This > is a "big hurry" kind of request for Hubie Tolson. > > Thanks, > > Mark Bitterlich > > > * > > * > > -- Maybe life is not the party that we were expecting, but in the mean time, we're here, the band is playing, so we may as well dance....." Douglas Sapp Doug Sapp LLC 18B Riverview Road Omak WA 98841 PH 509-826-4610 Fax 509-826-3644 ________________________________ Message 5 _____________________________________ Time: 12:05:15 PM PST US Subject: Yak-List: Re: landing light replacement From: "Bill1200" Yep, 52. Thanks Read this topic online here: http://forums.matronics.com/viewtopic.php?p=277653#277653 ________________________________ Message 6 _____________________________________ Time: 03:19:13 PM PST US From: Cpayne Subject: Yak-List: Re: Parts needed The Oil supply tubes DO NOT interchange because they are different lengths. The Huosai prop is mounted over a splined shaft that protrudes into the propeller housing, thus it is fairly short. The V530 prop mounts to a flange and needs a rather long oil supply tube to run the depth of the hub. Threads are the same as well of diameters but that is about it. Craig Payne ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.