Today's Message Index:
----------------------
1. 02:12 AM - Fw: No mosque at Ground Zero (Chris Wise)
2. 03:49 AM - Re: Fw: No mosque at Ground Zero (Didier BLOUZARD)
3. 04:21 AM - Re: Yak-List Digest: 4 Msgs - 06/19/10 (Anne and Buddy Moman)
4. 05:50 AM - Re: Re: Yak-List Digest: 4 Msgs - 06/19/10 (SC)
5. 05:55 AM - Re: Re: Yak-List Digest: 4 Msgs - 06/19/10 (Didier BLOUZARD)
6. 06:32 AM - Re: Yak-List Digest: 4 Msgs - 06/19/10 (Joseph Colquitt)
7. 11:24 AM - Re: Fw: No mosque at Ground Zero (Yak Pilot)
8. 11:43 AM - Re: Re: Yak-List Digest: 4 Msgs - 06/19/10 (Didier BLOUZARD)
9. 02:34 PM - Re: Looking for Original Yak Antenna (Yak Pilot)
10. 02:34 PM - Automotive Plugs and Prop Gov Setup For M14P (PSalter@aol.com)
11. 03:22 PM - Re: Automotive Plugs and Prop Gov Setup For M14P (SC)
12. 03:23 PM - Re: Looking for Original Yak Antenna (SC)
13. 04:06 PM - Re: Automotive Plugs and Prop Gov Setup For M14P (Roger Kemp M.D.)
14. 04:10 PM - Re: Looking for Original Yak Antenna (Roger Kemp M.D.)
15. 07:44 PM - Re: Fw: No mosque at Ground Zero (cjpilot710@aol.com)
16. 08:54 PM - Fw: Oil and Radials (Chris Wise)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fw: No mosque at Ground Zero |
G'Day Guys,
Hell, I know that I should not be doing this on this terrific Yak and CJ
site.
But hey, most of you guys are in America, a country that most of us in
Australia respect.
9/11 shocked us and the memory of that terrible event is very much
alive.
But this UTube video is circulating around Australia and I and indeed
many others find it most disturbing.
I am expecting a fair amount of flack due to posting this as the
Yak-List is not for any political or other nonsense, but if this is true
of what may be going to happen as close as can be to groundzero, then I
am sickened and disgusted re the total lack of respect and insensitivity
to those that where blatantly murdered by these fanatics.
Ban me, chastise me or whatever else, but I am deeply affected by this.
And I am not American.
Cheers, Chris.
----- Original Message -----
From: Mr Keith Martyn
Sent: Sunday, June 20, 2010 10:42 AM
Subject: Fw: No mosque at Ground Zero
Subject: FW: No mosque at Ground Zero
-----
VIDEO OF THE WEEK: No mosque at Ground Zero - A must see video about
Islam in America. (May be removed from YouTube soon.)
http://www.youtube.com/watch_popup?v=vjS0Novt3X4
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: No mosque at Ground Zero |
Here in France we are very sensitive to these subject
I also have seem this video
It doesn't even deserve any reaction
The only thing that it deserve is no advertising at all
So I also am horrified but don't want to lose te on such a fake subject
Just pray for us!!!!
Didier Blouzard
+33 6 2424 3672
Le 20 juin 2010 =C3- 11:11, "Chris Wise" <wise@txc.net.au> a =C3=A9crit
:
> G'Day Guys,
>
> Hell, I know that I should not be doing this on this terrific Yak
> and CJ site.
> But hey, most of you guys are in America, a country that most of us
> in Australia respect.
> 9/11 shocked us and the memory of that terrible event is very much
> alive.
>
> But this UTube video is circulating around Australia and I and
> indeed many others find it most disturbing.
> I am expecting a fair amount of flack due to posting this as the Yak-
> List is not for any political or other nonsense, but if this is true
> of what may be going to happen as close as can be to groundzero,
> then I am sickened and disgusted re the total lack of respect and
> insensitivity to those that where blatantly murdered by these
> fanatics.
>
> Ban me, chastise me or whatever else, but I am deeply affected by
> this. And I am not American.
>
> Cheers, Chris.
>
> ----- Original Message -----
> From: Mr Keith Martyn
> To: Chris Wise
> Sent: Sunday, June 20, 2010 10:42 AM
> Subject: Fw: No mosque at Ground Zero
>
>
> Subject: FW: No mosque at Ground Zero
>
>
> -----
>
> VIDEO OF THE WEEK: No mosque at Ground Zero - A must see video about
> Islam in America. (May be removed from YouTube soon.)
>
> http://www.youtube.com/watch_popup?v=vjS0Novt3X4
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 4 Msgs - 06/19/10 |
Thanks for the suggestions on the Yak-18T spinner sources. Already
tried Doug Sapp, M-14P and Termikas----no luck. Will give West
London/Russian Aeros at shot...
Buddy
On Jun 20, 2010, at 1:59 AM, Yak-List Digest Server wrote:
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 4 Msgs - 06/19/10 |
Did you try George at GESOCO, VT
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Anne and Buddy
Moman
Sent: Sunday, June 20, 2010 7:18 AM
Subject: Yak-List: Re: Yak-List Digest: 4 Msgs - 06/19/10
Thanks for the suggestions on the Yak-18T spinner sources. Already
tried Doug Sapp, M-14P and Termikas----no luck. Will give West
London/Russian Aeros at shot...
Buddy
On Jun 20, 2010, at 1:59 AM, Yak-List Digest Server wrote:
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 4 Msgs - 06/19/10 |
Ok I am going to ask a lituanian Mechanic today
He is a good source for spare
Didier
Le 20 juin 2010 13:18, Anne and Buddy Moman <amoman@earthlink.net> a
crit :
> >
>
>
> Thanks for the suggestions on the Yak-18T spinner sources. Already
> tried Doug Sapp, M-14P and Termikas----no luck. Will give West
> London/Russian Aeros at shot...
> Buddy
> On Jun 20, 2010, at 1:59 AM, Yak-List Digest Server wrote:
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 4 Msgs - 06/19/10 |
Buddy, I don't have one but I do have a big spinner and you have
excellent skills and an experimental a/p! Moreover, it's in my storage
shed near your hangar. :-) Joe
Sent from my iPhone
On Jun 20, 2010, at 3:08 AM, "Yak-List Digest Server" <yak-list@matronics.com
> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest
> formatted
> in HTML for viewing with a web browser and features Hyperlinked
> Indexes
> and Message Navigation. The .txt file includes the plain ASCII
> version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 10-06-19&Archive=Yak
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 10-06-19&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Sat 06/19/10: 4
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:05 AM - Need Yak 18T spinner (Anne and Buddy Moman)
> 2. 06:29 AM - Re: Need Yak 18T spinner (SC)
> 3. 07:45 AM - Re: Need Yak 18T spinner (Roger Kemp M.D.)
> 4. 09:41 PM - Re: Looking for Original Yak Antenna (Roger Kemp
> M.D.)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 06:05:05 AM PST US
> From: Anne and Buddy Moman <amoman@earthlink.net>
> Subject: Yak-List: Need Yak 18T spinner
>
>
> Anyone got a Yak-18T spinner in good shape? I need one for my M-14P/
> CJ.
> Contact me off list.
>
> Buddy Moman
> amoman@earthlink.net
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 06:29:53 AM PST US
> From: "SC" <thecookoos@gmail.com>
> Subject: RE: Yak-List: Need Yak 18T spinner
>
>
> If no luck with M14-P Arizona or Doug Sapp try West London Aero Club/
> Russian
> Aeros. UK
>
> -----Original Message-----
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of Anne and
> Buddy
> Moman
> Sent: Saturday, June 19, 2010 9:04 AM
> Subject: Yak-List: Need Yak 18T spinner
>
>
> Anyone got a Yak-18T spinner in good shape? I need one for my M-14P/
> CJ.
> Contact me off list.
>
> Buddy Moman
> amoman@earthlink.net
>
>
> ________________________________ Message 3
> _____________________________________
>
>
> Time: 07:45:16 AM PST US
> From: "Roger Kemp M.D." <viperdoc@mindspring.com>
> Subject: RE: Yak-List: Need Yak 18T spinner
>
>
> I got mine from Termikus.
> Doc
>
> -----Original Message-----
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of Anne and
> Buddy
> Moman
> Sent: Saturday, June 19, 2010 8:04 AM
> Subject: Yak-List: Need Yak 18T spinner
>
>
> Anyone got a Yak-18T spinner in good shape? I need one for my M-14P/
> CJ.
> Contact me off list.
>
> Buddy Moman
> amoman@earthlink.net
>
>
> ________________________________ Message 4
> _____________________________________
>
>
> Time: 09:41:51 PM PST US
> From: "Roger Kemp M.D." <viperdoc@mindspring.com>
> Subject: RE: Yak-List: Looking for Original Yak Antenna
>
>
> Replace it with a Comant from Aircraft Spruce.
> http://www.aircraftspruce.com/menus/av/antenna_comant.html
> CI-121 is what I am using on the 50.
> Doc
>
> -----Original Message-----
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of NebraskaYak
> Sent: Friday, June 18, 2010 8:06 PM
> Subject: Yak-List: Looking for Original Yak Antenna
>
>
> Anyone know where a guy can get an original Yak 52 radio antenna?
> Mine is
> pretty corroded inside, to the point where it's unfixable. Thanks
> for any
> help.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=301711#301711
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: No mosque at Ground Zero |
-
Here in the United States we are pretty darn sensitive to it too.-
-
Chris has deep feelings in this regard as do a lot of people who love this
country.- No, it is not something that should be on the YAK List, but I f
ully understand the compassion and hurt that Chris feels and why he felt co
mpelled to say something.- I respect that emotion and feeling of helpless
ness.---
-
Regarding the link he posted:- The attention it deserves will be determin
ed by the education and personal experience of the listener, and no one els
e.---
-
I pray for all that are defending our freedom with their own lives.-
-
Best Regards to all, and apologies for commenting, but I had to.-
-
Mark Bitterlich
--- On Sun, 6/20/10, Didier BLOUZARD <didier.blouzard@gmail.com> wrote:
From: Didier BLOUZARD <didier.blouzard@gmail.com>
Subject: Re: Yak-List: Fw: No mosque at Ground Zero
Here in France we are very sensitive to these subject
I also have seem this video
It doesn't even deserve any reaction
The only thing that it deserve is no advertising at all
So I also am horrified but don't want to lose te on such a fake subject
Just pray for us!!!!
Didier Blouzard
+33 6 2424 3672
Le 20 juin 2010 =E0 11:11, "Chris Wise" <wise@txc.net.au> a =E9crit-:
G'Day Guys,
-
Hell, I know that I should not be doing this on this terrific Yak and CJ si
te.
But hey, most of you guys are in America, a country that most of us in Aust
ralia respect.
9/11 shocked us and the memory of that terrible event is very much alive.
-
But this UTube video is circulating around Australia and I and indeed many
others find it most disturbing.
I am expecting a fair amount of flack due to posting this as the Yak-List i
s not for any political or other nonsense, but if this is true of what may
be going to happen as close as can be to groundzero, then I am sickened and
disgusted re the total lack of respect and insensitivity to those that whe
re blatantly murdered by these fanatics.
-
Ban me, chastise me or whatever else, but I am deeply affected by this. And
I am not American.
-
Cheers, Chris.
-
----- Original Message -----
From: Mr Keith Martyn
Sent: Sunday, June 20, 2010 10:42 AM
Subject: Fw: No mosque at Ground Zero
-
-
Subject: FW: No mosque at Ground Zero
-
-
-----
VIDEO OF THE WEEK: No mosque at Ground Zero-- A must see video about Isla
m in America. (May be removed from YouTube soon.)
http://www.youtube.com/watch_popup?v=vjS0Novt3X4
-
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.c
om/Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/con
tribution
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 4 Msgs - 06/19/10 |
I spoke with my friend
A regular small cover for the blade is very easy to have and is really
cheap
A spinner is also not too difficult to have but cost a lot, like 5 to
800 euros.
Come back to me if you like
Cheers
Didier Blouzard
+33 6 2424 3672
Le 20 juin 2010 13:18, Anne and Buddy Moman <amoman@earthlink.net> a
crit :
> >
>
>
> Thanks for the suggestions on the Yak-18T spinner sources. Already
> tried Doug Sapp, M-14P and Termikas----no luck. Will give West
> London/Russian Aeros at shot...
> Buddy
> On Jun 20, 2010, at 1:59 AM, Yak-List Digest Server wrote:
>
>
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for Original Yak Antenna |
The original YAK antennas can be difficult to find. As Doc Kemp suggested, it is
really wise to just replace the thing with a modern antenna design. I personally
pulled mine and replaced it a long time ago. Yes, it is a little bit of
a pain in the tail to make a metal plate to fit the location where the original
antenna goes and drill it to also accept a new antenna design, but it is worth
the time to do so. Comant (sp?) sells several very good model antennas...
one that even includes a GPS antenna inside. Cool. Not cheap, but last a LONG
time.
Mark Bitterlich
--- On Fri, 6/18/10, NebraskaYak <andrew.malousek@comcast.net> wrote:
> From: NebraskaYak <andrew.malousek@comcast.net>
> Subject: Yak-List: Looking for Original Yak Antenna
> To: yak-list@matronics.com
> Date: Friday, June 18, 2010, 9:05 PM
> "NebraskaYak" <andrew.malousek@comcast.net>
>
> Anyone know where a guy can get an original Yak 52 radio
> antenna? Mine is pretty corroded inside, to the point where
> it's unfixable. Thanks for any help.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=301711#301711
>
>
>
>
>
>
>
> Forum -
> FAQ,
> - MATRONICS WEB FORUMS -
> List Contribution Web Site -
> -Matt
> Dralle, List Admin.
>
>
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Automotive Plugs and Prop Gov Setup For M14P |
What automotive plugs are used for the M14P after the wire conversion?
Does anyone have knowledge of the proper setup for the propeller governor?
Thanks
Phil
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Automotive Plugs and Prop Gov Setup For M14P |
Jill at M14-P produced a paper on setting up the prop. Try their web site
in Arizona.
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of PSalter@aol.com
Sent: Sunday, June 20, 2010 5:32 PM
Subject: Yak-List: Automotive Plugs and Prop Gov Setup For M14P
What automotive plugs are used for the M14P after the wire conversion?
Does anyone have knowledge of the proper setup for the propeller governor?
Thanks
Phil
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Looking for Original Yak Antenna |
I used my original mounting plate and connections and epoxied in a new mast
unit of the right length - work was done by Leon Navarrow in San Diego -
seems to work OK so far.
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak Pilot
Sent: Sunday, June 20, 2010 5:31 PM
Subject: Re: Yak-List: Looking for Original Yak Antenna
The original YAK antennas can be difficult to find. As Doc Kemp suggested,
it is really wise to just replace the thing with a modern antenna design. I
personally pulled mine and replaced it a long time ago. Yes, it is a little
bit of a pain in the tail to make a metal plate to fit the location where
the original antenna goes and drill it to also accept a new antenna design,
but it is worth the time to do so. Comant (sp?) sells several very good
model antennas... one that even includes a GPS antenna inside. Cool. Not
cheap, but last a LONG time.
Mark Bitterlich
--- On Fri, 6/18/10, NebraskaYak <andrew.malousek@comcast.net> wrote:
> From: NebraskaYak <andrew.malousek@comcast.net>
> Subject: Yak-List: Looking for Original Yak Antenna
> To: yak-list@matronics.com
> Date: Friday, June 18, 2010, 9:05 PM
> "NebraskaYak" <andrew.malousek@comcast.net>
>
> Anyone know where a guy can get an original Yak 52 radio
> antenna? Mine is pretty corroded inside, to the point where
> it's unfixable. Thanks for any help.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=301711#301711
>
>
>
>
>
>
>
> Forum -
> FAQ,
> - MATRONICS WEB FORUMS -
> List Contribution Web Site -
> -Matt
> Dralle, List Admin.
>
>
>
>
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Automotive Plugs and Prop Gov Setup For M14P |
Phil,
Not at my hanger right now but I remember NGK. I will have to look at the
box with my spare plugs to give you the exact number. Will get it tomorrow
afternoon.
Sorry,
Doc
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of SC
Sent: Sunday, June 20, 2010 5:21 PM
Subject: RE: Yak-List: Automotive Plugs and Prop Gov Setup For M14P
Jill at M14-P produced a paper on setting up the prop. Try their web site
in Arizona.
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of PSalter@aol.com
Sent: Sunday, June 20, 2010 5:32 PM
Subject: Yak-List: Automotive Plugs and Prop Gov Setup For M14P
What automotive plugs are used for the M14P after the wire conversion?
Does anyone have knowledge of the proper setup for the propeller governor?
Thanks
Phil
http://www.matronics.com/Navigator?Yak-List
http://forums.matronics.com
http://www.matronics.com/contribution
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Looking for Original Yak Antenna |
They (Comant) even has and antenna that contains all there functions. I does
the gps function, XM weather, and VHF. Wish they had that when I bought the
one I have installed now. I have be using this one for 3 years now without
any issues.
Doc
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of SC
Sent: Sunday, June 20, 2010 5:23 PM
Subject: RE: Yak-List: Looking for Original Yak Antenna
I used my original mounting plate and connections and epoxied in a new mast
unit of the right length - work was done by Leon Navarrow in San Diego -
seems to work OK so far.
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak Pilot
Sent: Sunday, June 20, 2010 5:31 PM
Subject: Re: Yak-List: Looking for Original Yak Antenna
The original YAK antennas can be difficult to find. As Doc Kemp suggested,
it is really wise to just replace the thing with a modern antenna design. I
personally pulled mine and replaced it a long time ago. Yes, it is a little
bit of a pain in the tail to make a metal plate to fit the location where
the original antenna goes and drill it to also accept a new antenna design,
but it is worth the time to do so. Comant (sp?) sells several very good
model antennas... one that even includes a GPS antenna inside. Cool. Not
cheap, but last a LONG time.
Mark Bitterlich
--- On Fri, 6/18/10, NebraskaYak <andrew.malousek@comcast.net> wrote:
> From: NebraskaYak <andrew.malousek@comcast.net>
> Subject: Yak-List: Looking for Original Yak Antenna
> To: yak-list@matronics.com
> Date: Friday, June 18, 2010, 9:05 PM
> "NebraskaYak" <andrew.malousek@comcast.net>
>
> Anyone know where a guy can get an original Yak 52 radio
> antenna? Mine is pretty corroded inside, to the point where
> it's unfixable. Thanks for any help.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=301711#301711
>
>
>
>
>
>
>
> Forum -
> FAQ,
> - MATRONICS WEB FORUMS -
> List Contribution Web Site -
> -Matt
> Dralle, List Admin.
>
>
>
>
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: No mosque at Ground Zero |
I have to ditto Mark's remarks.
Jim "Pappy" Goolsby
-----Original Message-----
From: Yak Pilot <yakplt@yahoo.com>
Sent: Sun, Jun 20, 2010 2:20 pm
Subject: Re: Yak-List: Fw: No mosque at Ground Zero
Here in the United States we are pretty darn sensitive to it too.
Chris has deep feelings in this regard as do a lot of people who love this
country. No, it is not something that should be on the YAK List, but I
fully understand the compassion and hurt that Chris feels and why he felt
compelled to say something. I respect that emotion and feeling of helple
ssness.
Regarding the link he posted: The attention it deserves will be determine
d by the education and personal experience of the listener, and no one els
e.
I pray for all that are defending our freedom with their own lives.
Best Regards to all, and apologies for commenting, but I had to.
Mark Bitterlich
--- On Sun, 6/20/10, Didier BLOUZARD <didier.blouzard@gmail.com> wrote:
From: Didier BLOUZARD <didier.blouzard@gmail.com>
Subject: Re: Yak-List: Fw: No mosque at Ground Zero
Here in France we are very sensitive to these subject
I also have seem this video
It doesn't even deserve any reaction
The only thing that it deserve is no advertising at all
So I also am horrified but don't want to lose te on such a fake subject
Just pray for us!!!!
Didier Blouzard
+33 6 2424 3672
Le 20 juin 2010 =C3- 11:11, "Chris Wise" <wise@txc.net.au> a =C3=A9crit
:
G'Day Guys,
Hell, I know that I should not be doing this on this terrific Yak and CJ
site.
But hey, most of you guys are in America, a country that most of us in Aus
tralia respect.
9/11 shocked us and the memory of that terrible event is very much alive.
But this UTube video is circulating around Australia and I and indeed many
others find it most disturbing.
I am expecting a fair amount of flack due to posting this as the Yak-List
is not for any political or other nonsense, but if this is true of what
may be going to happen as close as can be to groundzero, then I am sicken
ed and disgusted re the total lack of respect and insensitivity to those
that where blatantly murdered by these fanatics.
Ban me, chastise me or whatever else, but I am deeply affected by this. An
d I am not American.
Cheers, Chris.
----- Original Message -----
From: Mr Keith Martyn
Sent: Sunday, June 20, 2010 10:42 AM
Subject: Fw: No mosque at Ground Zero
Subject: FW: No mosque at Ground Zero
-----
VIDEO OF THE WEEK: No mosque at Ground Zero - A must see video about Islam
in America. (May be removed from YouTube soon.)
http://www.youtube.com/watch_popup?v=vjS0Novt3X4
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.
com/Navigator?Yak-List
ref="http://forums.matronics.com">http://forums.matronics.com
ref="http://www.matronics.com/contribution">http://www.matronics.com/con
tribution
=nofollow target=_blank>http://www.matronics.com/Navigator?Yak-List
t=_blank>http://forums.matronics.com
low target=_blank>http://www.matronics.com/contribution
========================
===========
-= - The Yak-List Email Forum -
-= Use the Matronics List Features Navigator to browse
-= the many List utilities such as List Un/Subscription,
-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
-= Photoshare, and much much more:
-
-= --> http://www.matronics.com/Navigator?Yak-List
-
-========================
========================
===========
-= - MATRONICS WEB FORUMS -
-= Same great content also available via the Web Forums!
-
-= --> http://forums.matronics.com
-
-========================
========================
===========
-= - List Contribution Web Site -
-= Thank you for your generous support!
-= -Matt Dralle, List Admin.
-= --> http://www.matronics.com/contribution
-========================
========================
===========
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fw: Oil and Radials |
G'Day All,
I received this article the other day. A "good oil" article.
Some of you have no doubt read this, but I thought that it is well worth
forwarding.
Cheers,
Chris.
----- Original Message -----
From: Ivor Paech
Sent: Sunday, June 20, 2010 9:13 AM
Subject: Fw: Oil and Radials
Cop this and pass it on....!!
And thanks for Friday night. You are getting the hang of it.
Toof
----- Original Message -----
From: Tracey McFarlane
Wendy Wills'
Sent: Sunday, June 20, 2010 8:09 AM
Subject: Oil and Radials
No so appropriate for the little ones, but interesting anyway.
http://www.precisionengines.com/pdf/oilBulletin.pdf
-------------------------------------------------------------------------
-------
Checked by AVG - www.avg.com
18:35:00
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|