---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Fri 01/21/11: 25 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:31 AM - Re: Re: Oil cooler pre-heater (Eric Wobschall) 2. 03:49 AM - Cold Oil Woes (Cpayne) 3. 04:42 AM - Pre Heaters (pilko2) 4. 04:54 AM - Re: Pre Heaters (pilko2) 5. 05:03 AM - Re: Pre Heaters (Eric Wobschall) 6. 05:03 AM - Re: Pre Heaters (Eric Wobschall) 7. 05:43 AM - Re: Pre Heaters (rick@rvairshows.com) 8. 06:05 AM - Re: Pre Heaters (George Coy) 9. 06:05 AM - Lithuanian Hangar (George Coy) 10. 06:05 AM - Lithuanian Hangar (George Coy) 11. 06:57 AM - Re: Pre Heaters (ssssskippy) 12. 07:11 AM - Russian Shuttle program (Herb Coussons) 13. 07:29 AM - Re: Pre Heaters (Eric Wobschall) 14. 07:29 AM - Re: Pre Heaters (Eric Wobschall) 15. 07:40 AM - Re: Pre Heaters (Olivier Vigneron) 16. 07:48 AM - Re: Pre Heaters (Eric Wobschall) 17. 08:08 AM - Re: Pre Heaters (Olivier Vigneron) 18. 10:15 AM - Re: Oil cooler pre-heater (barryhancock) 19. 11:36 AM - Re: Re: Oil cooler pre-heater (Didier Blouzard) 20. 12:25 PM - Re: Re: Oil cooler pre-heater (Eric Wobschall) 21. 01:18 PM - ADC Low Oil Pressure Switch (Mike Bell) 22. 01:41 PM - Re: Re: Oil cooler pre-heater (Didier Blouzard) 23. 02:46 PM - Re: Re: Oil cooler pre-heater (Didier Blouzard) 24. 03:10 PM - CJ6 gear collapse in Ontario (Elmar Hegenauer) 25. 05:47 PM - Re: CJ6 gear collapse in Ontario (keithmckinley) ________________________________ Message 1 _____________________________________ Time: 03:31:37 AM PST US From: Eric Wobschall Subject: Re: Yak-List: Re: Oil cooler pre-heater I'm doing the paperwork now. On Jan 21, 2011, at 1:46 AM, Didier Blouzard wrote: > Is your pre-heating device certified by an FAA inspector. > Have you tested your installation in an EASA certified process.....?? > But more important than that have you filled the thousands pages of the pre-request allowing you to ask the question to the right organism??? > If not it will cost you ....... bottles and bottles of Vodka to make the administration forget your existence !!! > You'd better stop flying and start the paperworks!!! > > > > > 2011/1/21 keithmckinley > > What the hell Mark! You didn't insulate the duct work! > > -------- > Keith McKinley > 700HS > KFIT > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=327737#327737 > > > > > > > > ========== > rget="_blank">http://www.matronics.com/Navigator?Yak-List > ========== > http://forums.matronics.com > ========== > le, List Admin. > ="_blank">http://www.matronics.com/contribution > ========== > > > > > > > -- > Didier BLOUZARD > didier.blouzard@gmail.com > 0624243672 > > > ________________________________ Message 2 _____________________________________ Time: 03:49:27 AM PST US From: Cpayne Subject: Yak-List: Cold Oil Woes Following the current discussion here, just a few facts about the current case I described: there was No filter collapse or clogging, verified by dissection. An alternate relief valve/circuit probably could have relieved the instantaneous pressure spike. Then again, a heated hanger solves a lot more problems than oil; such as frozen slush in the brakes, etc. The system I use has been in service since the mid-90's on dozens of CJ's. However, cold weather operations are a challenge for any piston aircraft in my experience. Craig Payne ________________________________ Message 3 _____________________________________ Time: 04:42:04 AM PST US From: "pilko2" Subject: Yak-List: Pre Heaters Pre heating the Lithuanian way with a carbon "footprint" the size of Texas ! The mercury read minus 15C on the day. Makes recent events in the Gulf look almost environmentally friendly. ****************** We're hear for a good time not a long time, enjoy. kp ________________________________ Message 4 _____________________________________ Time: 04:54:00 AM PST US From: "pilko2" Subject: RE: Yak-List: Pre Heaters A more revealing image. ****************** We're hear for a good time not a long time, enjoy it. kp ________________________________ Message 5 _____________________________________ Time: 05:03:48 AM PST US From: Eric Wobschall Subject: Re: Yak-List: Pre Heaters I was hoping to get one of these rigs, including the skis: On Jan 21, 2011, at 7:15 AM, pilko2 wrote: > > Pre heating the Lithuanian way with a carbon "footprint" the size of Texas ! > The mercury read minus 15C on the day. > > Makes recent events in the Gulf look almost environmentally friendly. > > ****************** > > > We're hear for a good time not a long time, enjoy. > kp > ________________________________ Message 6 _____________________________________ Time: 05:03:59 AM PST US Subject: Re: Yak-List: Pre Heaters From: Eric Wobschall Hey, we don't stand down over the winter, either. On Jan 21, 2011, at 7:50 AM, pilko2 wrote: > A more revealing image. > > > ****************** > > > We're hear for a good time not a long time, enjoy it. > kp > ________________________________ Message 7 _____________________________________ Time: 05:43:25 AM PST US Subject: Re: Yak-List: Pre Heaters From: rick@rvairshows.com Do have the names/numbers of the dorval TC people. For validation of foreign flight authority? Misplaced them. Rick ------Original Message------ From: Eric Wobschall Sender: owner-yak-list-server@matronics.com ReplyTo: yak-list@matronics.com Subject: Re: Yak-List: Pre Heaters Sent: Jan 21, 2011 8:01 AM Hey, we don't stand down over the winter, either. On Jan 21, 2011, at 7:50 AM, pilko2 wrote: > A more revealing image. > > > ****************** > > > We're hear for a good time not a long time, enjoy it. > kp > Sent from my Verizon Wireless BlackBerry ________________________________ Message 8 _____________________________________ Time: 06:05:01 AM PST US From: "George Coy" Subject: RE: Yak-List: Pre Heaters Lovely Hangar. As I recall there are some of the "children's" gliders in that hangar. It was a most interesting system of teaching very young children to fly. As I recall there was a cable system that was motorized and went around the field. The small gliders were tethered to the cable and allowed the young pilots to fly a few feet above the ground. -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of pilko2 Sent: Friday, January 21, 2011 7:16 AM Subject: Yak-List: Pre Heaters Pre heating the Lithuanian way with a carbon "footprint" the size of Texas ! The mercury read minus 15C on the day. Makes recent events in the Gulf look almost environmentally friendly. ****************** We're hear for a good time not a long time, enjoy. kp ________________________________ Message 9 _____________________________________ Time: 06:05:08 AM PST US From: "George Coy" Subject: Yak-List: Lithuanian Hangar Lovely Hangar. As I recall there are some of the "children's" gliders in that hangar. It was a most interesting system of teaching very young children to fly. As I recall there was a cable system that was motorized and went around the field. The small gliders were tethered to the cable and allowed the young pilots to fly a few feet above the ground. -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of pilko2 Sent: Friday, January 21, 2011 7:16 AM Subject: Yak-List: Pre Heaters Pre heating the Lithuanian way with a carbon "footprint" the size of Texas ! The mercury read minus 15C on the day. Makes recent events in the Gulf look almost environmentally friendly. ****************** We're hear for a good time not a long time, enjoy. kp ________________________________ Message 10 ____________________________________ Time: 06:05:09 AM PST US From: "George Coy" Subject: Yak-List: Lithuanian Hangar Lovely Hangar. As I recall there are some of the "children's" gliders in that hangar. It was a most interesting system of teaching very young children to fly. As I recall there was a cable system that was motorized and went around the field. The small gliders were tethered to the cable and allowed the young pilots to fly a few feet above the ground. -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of pilko2 Sent: Friday, January 21, 2011 7:16 AM Subject: Yak-List: Pre Heaters Pre heating the Lithuanian way with a carbon "footprint" the size of Texas ! The mercury read minus 15C on the day. Makes recent events in the Gulf look almost environmentally friendly. ****************** We're hear for a good time not a long time, enjoy. kp ________________________________ Message 11 ____________________________________ Time: 06:57:19 AM PST US From: "ssssskippy" Subject: RE: Yak-List: Pre Heaters Just a question: When you put this kind of skis, is the gear still retractable yes or not? Thanks In France it looked like Lithuania 2 weeks ago :-) -----Message d'origine----- De-: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] De la part de Eric Wobschall Envoy=E9-: vendredi 21 janvier 2011 14:00 =C0-: yak-list@matronics.com Objet-: Re: Yak-List: Pre Heaters I was hoping to get one of these rigs, including the skis: ________________________________ Message 12 ____________________________________ Time: 07:11:37 AM PST US From: Herb Coussons Subject: Yak-List: Russian Shuttle program Photos of the abandoned Russian shuttle program. Are they behind us? Or ahead of us because they abandoned the shuttle prior to the US? http://www.themysteryworld.com/2010/12/abandoned-remains-of-russian-space.html Dr. Herb Coussons, MD drc@wscare.com 2641 Development Drive Green Bay, WI 54311 Cell 920-639-8434 Work 920-338-6868 Fax 920-338-6869 ________________________________ Message 13 ____________________________________ Time: 07:29:03 AM PST US Subject: Re: Yak-List: Pre Heaters From: Eric Wobschall Nope... They stay out... but there are brakes on those skis! On Jan 21, 2011, at 9:54 AM, ssssskippy wrote: > Just a question: > > When you put this kind of skis, is the gear still retractable yes or not? > > Thanks > > In France it looked like Lithuania 2 weeks ago :-) > > -----Message d'origine----- > De : owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] De la part de Eric Wobschall > Envoy : vendredi 21 janvier 2011 14:00 > : yak-list@matronics.com > Objet : Re: Yak-List: Pre Heaters > > I was hoping to get one of these rigs, including the skis: > > > ________________________________ Message 14 ____________________________________ Time: 07:29:27 AM PST US From: Eric Wobschall Subject: Re: Yak-List: Pre Heaters Mario Paquette Inspecteur- Maintenance des a=E9ronefs Inspector- Aircraft Maintenance T=E9l=E9phone: 514.633.3598| t=E9l=E9copieur / facsimile 514.633.3538 Mario.Paquette@tc.gc.ca Transports Canada | 700 Leigh Capr=E9ol (NAMJ), Dorval (Qu=E9bec) H4Y 1G7 Gouvernement du Canada | Government of Canada Payment phone number is: 514.633.3272 On Jan 21, 2011, at 8:37 AM, rick@rvairshows.com wrote: > > Do have the names/numbers of the dorval TC people. For validation of foreign flight authority? Misplaced them. > Rick > ------Original Message------ > From: Eric Wobschall > Sender: owner-yak-list-server@matronics.com > To: yak-list@matronics.com > ReplyTo: yak-list@matronics.com > Subject: Re: Yak-List: Pre Heaters > Sent: Jan 21, 2011 8:01 AM > > > Hey, we don't stand down over the winter, either. > > > On Jan 21, 2011, at 7:50 AM, pilko2 wrote: > >> A more revealing image. >> >> >> ****************** >> >> >> We're hear for a good time not a long time, enjoy it. >> kp >> > > > > > > > > Sent from my Verizon Wireless BlackBerry > > > > > ________________________________ Message 15 ____________________________________ Time: 07:40:32 AM PST US Subject: Re: Yak-List: Pre Heaters From: Olivier Vigneron ok thanks The snow is a natural brake :-) 2011/1/21 Eric Wobschall > > Nope... They stay out... but there are brakes on those skis! > > > On Jan 21, 2011, at 9:54 AM, ssssskippy wrote: > > > Just a question: > > > > When you put this kind of skis, is the gear still retractable yes or no t? > > > > Thanks > > > > In France it looked like Lithuania 2 weeks ago :-) > > > > -----Message d'origine----- > > De : owner-yak-list-server@matronics.com > > [mailto:owner-yak-list-server@matronics.com] De la part de Eric > Wobschall > > Envoy=E9 : vendredi 21 janvier 2011 14:00 > > =C0 : yak-list@matronics.com > > Objet : Re: Yak-List: Pre Heaters > > > > I was hoping to get one of these rigs, including the skis: > > > > > > > > =========== =========== =========== =========== > > ________________________________ Message 16 ____________________________________ Time: 07:48:25 AM PST US From: Eric Wobschall Subject: Re: Yak-List: Pre Heaters It is... but just to be clear, there are brakes that are actuated by the brake lever (pneumatically). On Jan 21, 2011, at 10:36 AM, Olivier Vigneron wrote: > ok thanks > > The snow is a natural brake :-) > > 2011/1/21 Eric Wobschall > > Nope... They stay out... but there are brakes on those skis! > > > On Jan 21, 2011, at 9:54 AM, ssssskippy wrote: > > > Just a question: > > > > When you put this kind of skis, is the gear still retractable yes or not? > > > > Thanks > > > > In France it looked like Lithuania 2 weeks ago :-) > > > > -----Message d'origine----- > > De : owner-yak-list-server@matronics.com > > [mailto:owner-yak-list-server@matronics.com] De la part de Eric Wobschall > > Envoy=E9 : vendredi 21 janvier 2011 14:00 > > =C0 : yak-list@matronics.com > > Objet : Re: Yak-List: Pre Heaters > > > > I was hoping to get one of these rigs, including the skis: > > > > > > > > > > ========== > rget="_blank">http://www.matronics.com/Navigator?Yak-List > ========== > http://forums.matronics.com > ========== > le, List Admin. > ="_blank">http://www.matronics.com/contribution > ========== > > > > > > > ________________________________ Message 17 ____________________________________ Time: 08:08:14 AM PST US Subject: Re: Yak-List: Pre Heaters From: Olivier Vigneron Understood :-) 2011/1/21 Eric Wobschall > It is... but just to be clear, there are brakes that are actuated by the > brake lever (pneumatically). > > > On Jan 21, 2011, at 10:36 AM, Olivier Vigneron wrote: > > ok thanks > > The snow is a natural brake :-) > > 2011/1/21 Eric Wobschall > >> >> Nope... They stay out... but there are brakes on those skis! >> >> >> On Jan 21, 2011, at 9:54 AM, ssssskippy wrote: >> >> > Just a question: >> > >> > When you put this kind of skis, is the gear still retractable yes or >> not? >> > >> > Thanks >> > >> > In France it looked like Lithuania 2 weeks ago :-) >> > >> > -----Message d'origine----- >> > De : owner-yak-list-server@matronics.com >> > [mailto:owner-yak-list-server@matronics.com] De la part de Eric >> Wobschall >> > Envoy=E9 : vendredi 21 janvier 2011 14:00 >> > =C0 : yak-list@matronics.com >> > Objet : Re: Yak-List: Pre Heaters >> > >> > I was hoping to get one of these rigs, including the skis: >> > >> > >> > >> >> >> >> ========== >> rget="_blank">http://www.matronics.com/Navigator?Yak-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== >> >> >> >> > * > > href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics .com/Navigator?Yak-List > href="http://forums.matronics.com/">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c ontribution > * > > > * > =========== =========== =========== =========== > * > > ________________________________ Message 18 ____________________________________ Time: 10:15:49 AM PST US Subject: Yak-List: Re: Oil cooler pre-heater From: "barryhancock" Gang, E-Z Heat makes a kit for the Yak-CJ that works supurbly...goes with the airplane, too! Takes about 2 hours to install. Under $500 even if you pay for the labor to install it. Plug it in when you are done flying and the engine stays all toasty warm until the next flight. FWIW, Barry -------- Barry Hancock Worldwide Warbirds, Inc. (909) 606-4444 www.worldwidewarbirds.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=327807#327807 ________________________________ Message 19 ____________________________________ Time: 11:36:25 AM PST US From: Didier Blouzard Subject: Re: Yak-List: Re: Oil cooler pre-heater eheh I hate the paperworks. Good luck brother in wings. Didier 2011/1/21 Eric Wobschall > I'm doing the paperwork now. > > > On Jan 21, 2011, at 1:46 AM, Didier Blouzard wrote: > > Is your pre-heating device certified by an FAA inspector. > Have you tested your installation in an EASA certified process.....?? > But more important than that have you filled the thousands pages of the > pre-request allowing you to ask the question to the right organism??? > If not it will cost you ....... bottles and bottles of Vodka to make the > administration forget your existence !!! > You'd better stop flying and start the paperworks!!! > > > 2011/1/21 keithmckinley > >> keith.mckinley@townisp.com> >> >> What the hell Mark! You didn't insulate the duct work! >> >> -------- >> Keith McKinley >> 700HS >> KFIT >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=327737#327737 >> >> >> >> >> >> >> >> ========== >> rget="_blank">http://www.matronics.com/Navigator?Yak-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== >> >> >> >> > > > -- > Didier BLOUZARD > didier.blouzard@gmail.com > 0624243672 > > * > > * > > > * > > * > > -- Didier BLOUZARD didier.blouzard@gmail.com 0624243672 ________________________________ Message 20 ____________________________________ Time: 12:25:36 PM PST US From: Eric Wobschall Subject: Re: Yak-List: Re: Oil cooler pre-heater Thanks for the good wishes, Didier. However we have a great FAA office here and the only interest they would take in it would be as aviators, so we count ourselves as lucky already. On Jan 21, 2011, at 2:25 PM, Didier Blouzard wrote: > eheh I hate the paperworks. > Good luck brother in wings. > > Didier > > 2011/1/21 Eric Wobschall > I'm doing the paperwork now. > > > On Jan 21, 2011, at 1:46 AM, Didier Blouzard wrote: > >> Is your pre-heating device certified by an FAA inspector. >> Have you tested your installation in an EASA certified process.....?? >> But more important than that have you filled the thousands pages of the pre-request allowing you to ask the question to the right organism??? >> If not it will cost you ....... bottles and bottles of Vodka to make the administration forget your existence !!! >> You'd better stop flying and start the paperworks!!! >> >> >> >> >> 2011/1/21 keithmckinley >> >> What the hell Mark! You didn't insulate the duct work! >> >> -------- >> Keith McKinley >> 700HS >> KFIT >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=327737#327737 >> >> >> >> >> >> >> >> ========== >> rget="_blank">http://www.matronics.com/Navigator?Yak-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== >> >> >> >> >> >> >> -- >> Didier BLOUZARD >> didier.blouzard@gmail.com >> 0624243672 >> >> >> > > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > > > > > -- > Didier BLOUZARD > didier.blouzard@gmail.com > 0624243672 > > > ________________________________ Message 21 ____________________________________ Time: 01:18:03 PM PST US Subject: Yak-List: ADC Low Oil Pressure Switch From: "Mike Bell" I'm installing an ADC "flat" oil filter on my Housai. I am considering adding an oil pressure warning light, but ADC no longer offers that kit. What's needed is a Honeywell "hobbs" pressure switch that's NC instead of the usual NO switch that activates a hobbs meter. They sell them in dozens of different pressure ranges. I was thinking of getting one that switches on below about 50 PSI. That would give some low pressure warning without nuisance warnings, but would be set off by lower idle pressure on the ground. If you set it to 20 PSI or so (below lowest idle pressure) it won't give much warning at cruise power if the pressure is dropping. Anybody have this installed and have a part number or know at what pressure it should activate the switch? -------- Mike Bell Elk Grove, CA avbell2(at)comcastdotnet Read this topic online here: http://forums.matronics.com/viewtopic.php?p=327816#327816 ________________________________ Message 22 ____________________________________ Time: 01:41:37 PM PST US From: Didier Blouzard Subject: Re: Yak-List: Re: Oil cooler pre-heater Indeed, you are lucky for that. I was of course joking and my joke was concerning our own EASA and DGAC. It seems to us that their only interest is in paperworks without any knowledge about pilots needs and concerns. That's the reason why a russian register seems to us a huge freedom. Plus we have the luck to have very skilled russian mechanics and inspectors around us and that is a big help. Concerning the heating devices, I suppose that they don't have to be any certification for these. Best whishes for you and plenty of hours up there in the air and in our Yak or cousins Didier : http://www.wonder-wings.fr So it was more like some self joke. 2011/1/21 Eric Wobschall > Thanks for the good wishes, Didier. However we have a great FAA office here > and the only interest they would take in it would be as aviators, so we > count ourselves as lucky already. > > > On Jan 21, 2011, at 2:25 PM, Didier Blouzard wrote: > > eheh I hate the paperworks. > Good luck brother in wings. > > Didier > > 2011/1/21 Eric Wobschall > >> I'm doing the paperwork now. >> >> >> On Jan 21, 2011, at 1:46 AM, Didier Blouzard wrote: >> >> Is your pre-heating device certified by an FAA inspector. >> Have you tested your installation in an EASA certified process.....?? >> But more important than that have you filled the thousands pages of the >> pre-request allowing you to ask the question to the right organism??? >> If not it will cost you ....... bottles and bottles of Vodka to make the >> administration forget your existence !!! >> You'd better stop flying and start the paperworks!!! >> >> >> >> >> 2011/1/21 keithmckinley >> >>> keith.mckinley@townisp.com> >>> >>> What the hell Mark! You didn't insulate the duct work! >>> >>> -------- >>> Keith McKinley >>> 700HS >>> KFIT >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=327737#327737 >>> >>> >>> >>> >>> >>> >>> >>> ========== >>> rget="_blank">http://www.matronics.com/Navigator?Yak-List >>> ========== >>> http://forums.matronics.com >>> ========== >>> le, List Admin. >>> ="_blank">http://www.matronics.com/contribution >>> ========== >>> >>> >>> >>> >> >> >> -- >> Didier BLOUZARD >> didier.blouzard@gmail.com >> 0624243672 >> >> * >> >> * >> >> >> * >> >> >> 3D======================================= >> 3D==== >> 3D============================================ >> 3D============================================ >> 3D============================================ >> * >> >> > > > -- > Didier BLOUZARD > didier.blouzard@gmail.com > 0624243672 > > * > > * > > > * > > * > > -- Didier BLOUZARD didier.blouzard@gmail.com 0624243672 ________________________________ Message 23 ____________________________________ Time: 02:46:44 PM PST US From: Didier Blouzard Subject: Re: Yak-List: Re: Oil cooler pre-heater I use it and it works dreat. I would say more than 4 hours to install if you want to make it well. Take care to install it under the level of oil. Service is great, after sales is great and people are really nice. Thanks to Todd the boss. I recommand. Cheers Didier 2011/1/21 barryhancock > bhancock@worldwidewarbirds.com> > > Gang, > > E-Z Heat makes a kit for the Yak-CJ that works supurbly...goes with the > airplane, too! Takes about 2 hours to install. Under $500 even if you pay > for the labor to install it. Plug it in when you are done flying and the > engine stays all toasty warm until the next flight. > > FWIW, > > Barry > > -------- > Barry Hancock > Worldwide Warbirds, Inc. > (909) 606-4444 > www.worldwidewarbirds.com > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=327807#327807 > > -- Didier BLOUZARD didier.blouzard@gmail.com 0624243672 ________________________________ Message 24 ____________________________________ Time: 03:10:29 PM PST US Subject: Yak-List: CJ6 gear collapse in Ontario From: Elmar Hegenauer last year there was an ugly gear failure in Ontario/Canada. The pilot posted some pictures on his website, looks quite scary. http://picasaweb.google.com/skidmk/FXMIPostAccident# Unfortunately I have no information how this happened, any ideas? cheers Elmar ________________________________ Message 25 ____________________________________ Time: 05:47:26 PM PST US Subject: Yak-List: Re: CJ6 gear collapse in Ontario From: "keithmckinley" I suggest you ask him, not vultures row. -------- Keith McKinley 700HS KFIT Read this topic online here: http://forums.matronics.com/viewtopic.php?p=327844#327844 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.