---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 02/15/11: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:35 AM - Re: Yak 52 fuel Reservoir (CJ6XXK) 2. 05:04 AM - Re: Aileron Bearings (A. Dennis Savarese) 3. 09:11 AM - Re: Aileron Bearings (doug sapp) 4. 01:18 PM - easy annual questions (Jon Boede) 5. 01:46 PM - Re: easy annual questions (A. Dennis Savarese) 6. 03:02 PM - Re: easy annual questions (doug sapp) 7. 05:52 PM - Re: Q1: Are IAR823 Qs allowed on yaklisT? If so, nose wheel Q. (Cliff Coy) ________________________________ Message 1 _____________________________________ Time: 12:35:57 AM PST US Subject: Yak-List: Re: Yak 52 fuel Reservoir From: "CJ6XXK" Hi all Cliff posted me a new reservoir and i received it within a week. Thanks very much for all you help and hope to deal with you again. Thanks Daniel Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331114#331114 ________________________________ Message 2 _____________________________________ Time: 05:04:00 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Aileron Bearings Take the physical dimensions ID, OD and height and then call Jill at M14P or Doug Sapp. Dennis On 2/15/2011 12:46 AM, Anthony Hudacek wrote: > Hi all, > Does anyone know where these aileron bearings for a Yak 18T can be > purchased? There are five in each wing and they are kind of an axial > type bearing. Sorry about the picture quality. > Ant. > > ________________________________ Message 3 _____________________________________ Time: 09:11:09 AM PST US Subject: Re: Yak-List: Aileron Bearings From: doug sapp Thanks for that Dennis, Yes I think I have them but need the ID/OD and thickness to be sure. Best, Doug On Tue, Feb 15, 2011 at 4:59 AM, A. Dennis Savarese < dsavarese0812@bellsouth.net> wrote: > dsavarese0812@bellsouth.net> > > Take the physical dimensions ID, OD and height and then call Jill at M14P > or Doug Sapp. > Dennis > > > On 2/15/2011 12:46 AM, Anthony Hudacek wrote: > >> Hi all, >> Does anyone know where these aileron bearings for a Yak 18T can be >> purchased? There are five in each wing and they are kind of an axial >> type bearing. Sorry about the picture quality. >> Ant. >> >> >> > > ________________________________ Message 4 _____________________________________ Time: 01:18:03 PM PST US From: Jon Boede Subject: Yak-List: easy annual questions As many times as I've been through an annual I don't know why I always wind up researching the same stuff every year... but these are really easy ones : What's the "magic formula" for lubing the air system? How much of it goes in and where? What aeroshell grease do y'all prefer for the prop? Thanks=2C Jon ________________________________ Message 5 _____________________________________ Time: 01:46:18 PM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: easy annual questions 25-30cc of a 50/50 mixture of alcohol and glycerin. I use Aeroshell #5 or #7 grease for the prop hub bearings. Dennis On 2/15/2011 3:12 PM, Jon Boede wrote: > As many times as I've been through an annual I don't know why I always > wind up researching the same stuff every year... but these are really > easy ones: > > What's the "magic formula" for lubing the air system? How much of it > goes in and where? > > What aeroshell grease do y'all prefer for the prop? > > Thanks, > Jon > > * > > > * ________________________________ Message 6 _____________________________________ Time: 03:02:50 PM PST US Subject: Re: Yak-List: easy annual questions From: doug sapp Jon, Many guys have requested that I offer a "annual kit", so I have put together all of the gaskets, and felt seals, normally required to do the "average" annual. It would be easy to also add a bit of glycerine to this kit if needed. Contact me off list if needed. Best, Doug On Tue, Feb 15, 2011 at 1:36 PM, A. Dennis Savarese < dsavarese0812@bellsouth.net> wrote: > dsavarese0812@bellsouth.net> > > 25-30cc of a 50/50 mixture of alcohol and glycerin. I use Aeroshell #5 or > #7 grease for the prop hub bearings. > Dennis > > > On 2/15/2011 3:12 PM, Jon Boede wrote: > >> As many times as I've been through an annual I don't know why I always >> wind up researching the same stuff every year... but these are really >> easy ones: >> >> What's the "magic formula" for lubing the air system? How much of it >> goes in and where? >> >> What aeroshell grease do y'all prefer for the prop? >> >> Thanks, >> Jon >> >> * >> >> >> * >> > > ________________________________ Message 7 _____________________________________ Time: 05:52:18 PM PST US Subject: Re: Yak-List: Q1: Are IAR823 Qs allowed on yaklisT? If so, nose wheel Q. From: Cliff Coy *We used to make the adapter bushings for the heavy duty 5.00x5 Wheel assy. I'll check and see what we've got for plans. Cliff * On Fri, Feb 11, 2011 at 12:28, Bruce Campbell wrote: > If so, We=92d like to get input from other IAR823 people regarding the > nosewheel. > > If not, what would be the appropriate forum? > > > Mine has gone missing, besides that Kleber tire is expensive. What would > be the best replacement? Have other people done this? > > > Thanks in advance > > > Bruce Campbell/Bridget Wellen > > Iar 823 S/n 04 n90823 > > > * > =========== =========== =========== =========== > * > > -- Clifford Coy Border Air Ltd. 629 Airport Rd. Swanton, VT 05488 802-868-2822 TEL 802-868-4465 FAX Skype: Cliff.Coy ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.