---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Thu 02/17/11: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:40 AM - Pin wrench (doug sapp) 2. 11:02 AM - Re: Pin wrench (Cliff Coy) 3. 11:04 AM - Re: Pin wrench (George Coy) 4. 07:12 PM - Re: easy annual questions (Adrian Coop Cooper) 5. 08:15 PM - Re: Re: easy annual questions (Roger Kemp M.D.) 6. 08:32 PM - cnc cutting for inst panel (keithmckinley) 7. 11:40 PM - Re: cnc cutting for inst panel (CJ6XXK) ________________________________ Message 1 _____________________________________ Time: 09:40:22 AM PST US Subject: Yak-List: Pin wrench From: doug sapp Many of you asked me to post when I had the exhaust and intake pin wrenches in stock again. We now have a limited number in stock, please contact me off list. Best, Doug ________________________________ Message 2 _____________________________________ Time: 11:02:59 AM PST US Subject: Re: Yak-List: Pin wrench From: Cliff Coy *We also have 5 piece tool kits in limited stock as well.... Cliff * On Thu, Feb 17, 2011 at 12:29, doug sapp wrote: > Many of you asked me to post when I had the exhaust and intake > pin wrenches in stock again. We now have a limited number in stock, please > contact me off list. > > Best, > Doug > > * > > * > > -- Clifford Coy Border Air Ltd. 629 Airport Rd. Swanton, VT 05488 802-868-2822 TEL 802-868-4465 FAX Skype: Cliff.Coy ________________________________ Message 3 _____________________________________ Time: 11:04:58 AM PST US From: "George Coy" Subject: RE: Yak-List: Pin wrench We stock a stainless steel pin wrench as well. From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of doug sapp Sent: Thursday, February 17, 2011 12:29 PM Subject: Yak-List: Pin wrench Many of you asked me to post when I had the exhaust and intake pin wrenches in stock again. We now have a limited number in stock, please contact me off list. Best, Doug ________________________________ Message 4 _____________________________________ Time: 07:12:29 PM PST US Subject: Yak-List: Re: easy annual questions From: "Adrian Coop Cooper" Re part of Jon's question on lubing the air system. He also asked where does it go? I would like to know this too. Where does it go and how does one flush it out? Given that glycerin attracts water is there a concern? I guess I am having trouble with the CJ manual. Any help with the procedure would be gratefully received Thanks Coop. :) -------- Coop Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331388#331388 ________________________________ Message 5 _____________________________________ Time: 08:15:48 PM PST US Subject: Re: Yak-List: Re: easy annual questions From: "Roger Kemp M.D." I put it in the put it in the main and emergency bottles before I put them back in their brackets in the fuselage. I then hook the system B nuts back to the tanks. I do this every couple of years when I do my annual. When I take the bottles out, I invert them over plastic cup to catch the contents thus checking for water in them.I leave them inverted over night to let them drain. After doing this for the last 7 tears. Doc Sent from my iPad On Feb 17, 2011, at 9:09 PM, "Adrian Coop Cooper" wrote: > > Re part of Jon's question on lubing the air system. He also asked where does it go? > I would like to know this too. Where does it go and how does one flush it out? Given that glycerin attracts water is there a concern? > I guess I am having trouble with the CJ manual. Any help with the procedure would be gratefully received > Thanks > Coop. :) > > -------- > Coop > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=331388#331388 > > > > > > > > > > ________________________________ Message 6 _____________________________________ Time: 08:32:38 PM PST US Subject: Yak-List: cnc cutting for inst panel From: "keithmckinley" Can anyone recommend a shop that is familiar with our instruments (CJ-6) and would likely have a stock CAD file they could manpulate. I have a blank panel from Doug that I'd like cut. I know I can cut the holes myself but the CNC machine does a MUCH nicer job! Keith -------- Keith McKinley 700HS KFIT Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331393#331393 ________________________________ Message 7 _____________________________________ Time: 11:40:32 PM PST US Subject: Yak-List: Re: cnc cutting for inst panel From: "CJ6XXK" Hi I can cnc cut what ever you would like.Has someone got a CAD file of the dash? Daniel Read this topic online here: http://forums.matronics.com/viewtopic.php?p=331395#331395 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.