---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 03/15/11: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:17 AM - Re: CJ6 strobe kit (Nanchang CJ6) 2. 01:49 AM - Re: canopy seals (Nanchang CJ6) 3. 01:49 AM - Re: canopy seals (Nanchang CJ6) 4. 01:50 AM - Re: canopy seals (Nanchang CJ6) 5. 03:01 AM - Re: canopy seals (Harv) 6. 08:26 AM - Re: Re: canopy seals (doug sapp) 7. 03:02 PM - gear door standoff spacing (Jon Boede) 8. 04:45 PM - Re: gear door standoff spacing (Walter Lannon) 9. 07:49 PM - Re: canopy seals (Mike Bell) 10. 09:31 PM - Re: CJ6 strobe kit (barryhancock) 11. 10:49 PM - Re: canopy seals (Harv) ________________________________ Message 1 _____________________________________ Time: 01:17:06 AM PST US Subject: Yak-List: Re: CJ6 strobe kit From: "Nanchang CJ6" Hi Harv, We can supply nav light kit HD-3. If you are interested in it,please contact me off list. Sarah -------- Sarah's E-mail:lcdzkj@live.cn Read this topic online here: http://forums.matronics.com/viewtopic.php?p=333937#333937 ________________________________ Message 2 _____________________________________ Time: 01:49:12 AM PST US Subject: Yak-List: Re: canopy seals From: "Nanchang CJ6" Hi, We can supply CJ6 parts in China. Please contact me off list. Sarah -------- Sarah's E-mail:lcdzkj@live.cn Read this topic online here: http://forums.matronics.com/viewtopic.php?p=333939#333939 ________________________________ Message 3 _____________________________________ Time: 01:49:22 AM PST US Subject: Yak-List: Re: canopy seals From: "Nanchang CJ6" Hi, We can supply CJ6 parts in China. Please contact me off list. Sarah -------- Sarah's E-mail:lcdzkj@live.cn Read this topic online here: http://forums.matronics.com/viewtopic.php?p=333938#333938 ________________________________ Message 4 _____________________________________ Time: 01:50:11 AM PST US Subject: Yak-List: Re: canopy seals From: "Nanchang CJ6" Hi, We can supply CJ6 parts in China. Please contact me off list. Sarah -------- Sarah's E-mail:lcdzkj@live.cn Read this topic online here: http://forums.matronics.com/viewtopic.php?p=333940#333940 ________________________________ Message 5 _____________________________________ Time: 03:01:44 AM PST US Subject: Yak-List: Re: canopy seals From: "Harv" Hi Rich I had exactly the same issue with my seals. I measured the profile dimensions and managed to match it with some off the roll at LAS (UK based aero parts supplier). You will need to drill out the 50 or so rivets and remove the seal retaining strip and then cut the new one to length and rivet it back etc. I couldn't see another way to do a lasting repair but I had my canopies in pieces to re-paint so that made it easier. I will post the details of what I have here and part numbers if you cant get it in your location. Rgs Harv Read this topic online here: http://forums.matronics.com/viewtopic.php?p=333941#333941 ________________________________ Message 6 _____________________________________ Time: 08:26:40 AM PST US Subject: Re: Yak-List: Re: canopy seals From: doug sapp Sarah, The part number is H2-0300-20, if you can provide it I'll take 80 pcs. Please advise. Doug On Tue, Mar 15, 2011 at 1:44 AM, Nanchang CJ6 wrote: > > Hi, > We can supply CJ6 parts in China. > Please contact me off list. > Sarah > > -------- > Sarah's E-mail:lcdzkj@live.cn > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=333938#333938 > > ________________________________ Message 7 _____________________________________ Time: 03:02:25 PM PST US From: Jon Boede Subject: Yak-List: gear door standoff spacing Looking for information on the spacers on the lower gear door standoff bolt s... length of each spacer=2C number and thickness of washers=2C plus place ment. There are plenty of washers on my friend's CJ's doors on one side plus it d oesn't seem to be quite right and it doesn't look like it's mating quite ri ght when the gear comes up based on the marks in the wing skin. I take the lower doors off for doing the gear swing... is it possible to sw ing the gear with the doors on? Seems like you'd have to jack the plane up to the moon. Thanks=2C Jon ________________________________ Message 8 _____________________________________ Time: 04:45:56 PM PST US From: Walter Lannon Subject: Re: Yak-List: gear door standoff spacing The spacer dimensions are determined by trial and error measurement and fitting with the aircraft on the correct jacks. Certainly it is possible (not to mention necessary) to swing the gear with the doors in place. Contact Doug for the right jacks. Walt ----- Original Message ----- From: Jon Boede To: yak-list@matronics.com Sent: Tuesday, March 15, 2011 2:58 PM Subject: Yak-List: gear door standoff spacing Looking for information on the spacers on the lower gear door standoff bolts... length of each spacer, number and thickness of washers, plus placement. There are plenty of washers on my friend's CJ's doors on one side plus it doesn't seem to be quite right and it doesn't look like it's mating quite right when the gear comes up based on the marks in the wing skin. I take the lower doors off for doing the gear swing... is it possible to swing the gear with the doors on? Seems like you'd have to jack the plane up to the moon. Thanks, Jon ________________________________ Message 9 _____________________________________ Time: 07:49:38 PM PST US Subject: Yak-List: Re: canopy seals From: "Mike Bell" Not the same as a proper windlace laced or riveted to the strip, but this is what I used: http://www.mcmaster.com/#8694k87/=bg982z Depending on your canopy you may need a slightly thinner or thicker version but this looks good and seems to be an appropriately dense rubber. The backing is very sticky. Be sure you have it exactly where you want it the first time. -------- Mike Bell Elk Grove, CA avbell2(at)comcastdotnet Read this topic online here: http://forums.matronics.com/viewtopic.php?p=334033#334033 ________________________________ Message 10 ____________________________________ Time: 09:31:18 PM PST US Subject: Yak-List: Re: CJ6 strobe kit From: "barryhancock" The Whelan kit is very good. We installed it on all of our restorations with very good results. The kit is more expensive than some others, but it is reliable, easy to install, and the comet flash is a much enhanced visual aid. Happy Flying, Barry -------- Barry Hancock Worldwide Warbirds, Inc. (909) 606-4444 www.worldwidewarbirds.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=334047#334047 ________________________________ Message 11 ____________________________________ Time: 10:49:49 PM PST US Subject: Yak-List: Re: canopy seals From: "Harv" Sorry I made a mistake, my canopy seal material came from Woolies Try this link http://www.woolies-trim.co.uk/p-1256-sponge-piping.aspx They do another seal thats very similar with slightly different dimensions so please check it's right for you.... Rgs Harv :) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=334052#334052 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.