---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Wed 04/20/11: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:03 PM - Brake cable (Chris Wise) 2. 02:42 PM - Air start solebnoid valve (Chris Wise) 3. 02:50 PM - Re: Air start solebnoid valve (George Coy) 4. 02:57 PM - Re: Air start solebnoid valve (A. Dennis Savarese) 5. 03:07 PM - Re: Air start solebnoid valve (Chris Wise) 6. 05:22 PM - (Bill Geipel) 7. 05:40 PM - Re: (Eric Wobschall) 8. 05:58 PM - Re: (A. Dennis Savarese) 9. 06:08 PM - Re: Re: (Eric Wobschall) ________________________________ Message 1 _____________________________________ Time: 02:03:49 PM PST US From: "Chris Wise" Subject: Yak-List: Brake cable G'Day All, Can someone please help me with the supply of a port (left side) brake cable for a Yak 18T urgently. Please advise ASAP and I would require the cable send to Australia via FedEx international express. Thanks and cheers, Chris. ________________________________ Message 2 _____________________________________ Time: 02:42:03 PM PST US From: "Chris Wise" Subject: Yak-List: Air start solebnoid valve G'Day again, Can anyone please tell me whereabouts the air start solenoid valve on a Yak 52? Where is it located. Does anyone have a actual photograph of the valve in its position? Thanks and cheers, Chris. ________________________________ Message 3 _____________________________________ Time: 02:50:29 PM PST US From: "George Coy" Subject: RE: Yak-List: Air start solebnoid valve On the inside of the firewall above and ahead of the pilots left foot. George Coy CAS Ltd. 714 Airport Rd. Swanton VT 05488 802-868-5633 off 802-363-5782 cell 802-868-4465 Fax george.coy@gmail.com http://coyafct.com/ SKYPE george.coy From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Chris Wise Sent: Wednesday, April 20, 2011 5:38 PM Subject: Yak-List: Air start solebnoid valve G'Day again, Can anyone please tell me whereabouts the air start solenoid valve on a Yak 52? Where is it located. Does anyone have a actual photograph of the valve in its position? Thanks and cheers, Chris. ________________________________ Message 4 _____________________________________ Time: 02:57:24 PM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Air start solebnoid valve Directly in front of your left rudder pedal on the back side of the firewall. It is mounted vertically. Dennis On 4/20/2011 4:38 PM, Chris Wise wrote: > GDay again, > > Can anyone please tell me whereabouts the air start solenoid valve on a > Yak 52? > > Where is it located. > > Does anyone have a actual photograph of the valve in its position? > > Thanks and cheers, > > Chris. > > * > > > * ________________________________ Message 5 _____________________________________ Time: 03:07:40 PM PST US From: "Chris Wise" Subject: RE: Yak-List: Air start solebnoid valve Thanks George and yes of course. I had clean forgotten. Cheers, Chris. From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of George Coy Sent: Thursday, 21 April 2011 7:17 AM Subject: RE: Yak-List: Air start solebnoid valve On the inside of the firewall above and ahead of the pilots left foot. George Coy CAS Ltd. 714 Airport Rd. Swanton VT 05488 802-868-5633 off 802-363-5782 cell 802-868-4465 Fax george.coy@gmail.com http://coyafct.com/ SKYPE george.coy From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Chris Wise Sent: Wednesday, April 20, 2011 5:38 PM Subject: Yak-List: Air start solebnoid valve G'Day again, Can anyone please tell me whereabouts the air start solenoid valve on a Yak 52? Where is it located. Does anyone have a actual photograph of the valve in its position? Thanks and cheers, Chris. http://www.matronics.com/Navigator?Yak-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 6 _____________________________________ Time: 05:22:23 PM PST US From: Bill Geipel Can anyone tell me if we need The 3 or 4 electro magnetic solenoids on the fire wall of the yak. I think they are electro magnetic. They have wires and barbed hose bibs. I have no hoses attached. Thank you. Blue Sky's ________________________________ Message 7 _____________________________________ Time: 05:40:15 PM PST US Subject: Yak-List: Re: From: Eric Wobschall Well, one is the solenoid to control the oil dilution valve. The hose connections between oil and fuel systems must have been capped off. That can one can be removed. On Apr 20, 2011, at 8:15 PM, Bill Geipel wrote: > > Can anyone tell me if we need The 3 or 4 electro magnetic solenoids on the fire wall of the yak. > I think they are electro magnetic. They have wires and barbed hose bibs. I have no hoses attached. > Thank you. > > Blue Sky's > > > > > > ________________________________ Message 8 _____________________________________ Time: 05:58:40 PM PST US From: "A. Dennis Savarese" Subject: Yak-List: Re: I know of no barbed hose bibs from the factory on Yak's. All factory hoses have metric nuts mating to male metric flare fittings. And that includes the fuel dilution valve on the firewall. Dennis On 4/20/2011 7:15 PM, Bill Geipel wrote: > --> Yak-List message posted by: Bill Geipel > > Can anyone tell me if we need The 3 or 4 electro magnetic solenoids on the fire wall of the yak. > I think they are electro magnetic. They have wires and barbed hose bibs. I have no hoses attached. > Thank you. > > Blue Sky's > > ________________________________ Message 9 _____________________________________ Time: 06:08:59 PM PST US Subject: Re: Yak-List: Re: From: Eric Wobschall I'm thinking the flare fittings are what he means. On Apr 20, 2011, at 8:55 PM, A. Dennis Savarese wrote: > > I know of no barbed hose bibs from the factory on Yak's. All factory hoses have metric nuts mating to male metric flare fittings. And that includes the fuel dilution valve on the firewall. > Dennis > > On 4/20/2011 7:15 PM, Bill Geipel wrote: >> --> Yak-List message posted by: Bill Geipel >> >> Can anyone tell me if we need The 3 or 4 electro magnetic solenoids on the fire wall of the yak. >> I think they are electro magnetic. They have wires and barbed hose bibs. I have no hoses attached. >> Thank you. >> >> Blue Sky's >> >> >> >> >> >> >> > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.