---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Wed 05/18/11: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:29 AM - cowls for Yak 18T (Chris Wise) 2. 02:56 AM - gone broke (Chris Wise) 3. 07:27 AM - Re: cowls for Yak 18T (Bill Geipel) 4. 08:09 AM - Re: cowls for Yak 18T (Richard Goode) 5. 09:30 PM - 55M Covers (andrew richards) 6. 09:43 PM - Air compressor (Tom Elliott) ________________________________ Message 1 _____________________________________ Time: 12:29:02 AM PST US From: "Chris Wise" Subject: Yak-List: cowls for Yak 18T G'Day All, I urgently require a set of cowls for my Yak 18T as I had a leg collapse on landing and it made a mess of the cowls plus brackets from the front of the engine to the front ring that locates the cowls and also locates the outer fixing for the louvers. Any help would be greatly appreciated. Thanks and cheers, Chris. ________________________________ Message 2 _____________________________________ Time: 02:56:13 AM PST US From: "Chris Wise" Subject: Yak-List: gone broke G'Day All , Who was the guy that took the money from a fair few for aircraft, engines and so on and then was unable to supply for various reasons? Can anyone remember this all happening not so very long ago. Thanks and cheers, Chris. ________________________________ Message 3 _____________________________________ Time: 07:27:35 AM PST US Subject: Re: Yak-List: cowls for Yak 18T From: Bill Geipel Are the same as all yaks? I have a set from a yak50. Upper and lower cowl. Blue Sky's On May 18, 2011, at 1:25 AM, "Chris Wise" wrote: > G=99Day All, > > > > I urgently require a set of cowls for my Yak 18T as I had a leg collapse o n landing and it made a mess of the cowls plus brackets from the front of th e engine to the front ring that locates the cowls and also locates the outer fixing for the louvers. > > Any help would be greatly appreciated. > > > > Thanks and cheers, > > Chris. > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 4 _____________________________________ Time: 08:09:11 AM PST US From: "Richard Goode" Subject: RE: Yak-List: cowls for Yak 18T Unfortunately, very different!! Richard Goode Rhodds Farm Lyonshall Hereford HR5 3LW Tel: +44 (0) 1544 340120 Fax: +44 (0) 1544 340129 www.russianaeros.com From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Bill Geipel Sent: 18 May 2011 15:23 Subject: Re: Yak-List: cowls for Yak 18T Are the same as all yaks? I have a set from a yak50. Upper and lower cowl. Blue Sky's On May 18, 2011, at 1:25 AM, "Chris Wise" wrote: G=99Day All, I urgently require a set of cowls for my Yak 18T as I had a leg collapse on landing and it made a mess of the cowls plus brackets from the front of the engine to the front ring that locates the cowls and also locates the outer fixing for the louvers. Any help would be greatly appreciated. Thanks and cheers, Chris. ========= ef="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.c om/Navigator?Yak-List ========= ums.matronics.com">http://forums.matronics.com ========= http://www.matronics.com/contribution">http://www.matronics.com/contribut ion ========= -- This message has been scanned for viruses and dangerous content by Invictawiz MailScanner, and is believed to be clean. ________________________________ Message 5 _____________________________________ Time: 09:30:34 PM PST US Subject: Yak-List: 55M Covers From: andrew richards Ive just been transferred interstate for work and unfortunately I am going to have to keep my 55M outside for a while, hangar space close by is rare Im in Brisbane (Australia) and the weather is usually hot or raining. I was wondering if anyone knew of a source for covers? I would be looking at canopy and empennage* *. Any help would be highly appreciated. Andrew ________________________________ Message 6 _____________________________________ Time: 09:43:45 PM PST US From: "Tom Elliott" Subject: Yak-List: Air compressor Question can you use a Russian cylinder and piston on a Chinese's lower unit? Tom Elliott CJ-6A NX63727 777 Quartz Ave PMB 7004 Sandy Valley NV 89019 Cell 702-595-2680 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.