---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sun 10/02/11: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:03 AM - Re: Award Winner for Sale (Elmar Hegenauer) 2. 04:20 AM - Re: Bulb for Yak18T rotating (CD 2.0) 3. 04:33 PM - Re: Re: Bulb for Yak18T rotating (Didier Blouzard) 4. 05:21 PM - nose section view port (cjpilot710@aol.com) 5. 06:54 PM - Re: nose section view port (Roger Kemp M.D.) 6. 08:36 PM - Re: M462RF (Walter Lannon) 7. 10:18 PM - Yak 18T prop (Francois Davel) 8. 10:26 PM - Re: Yak 18T prop (CD 2.0) ________________________________ Message 1 _____________________________________ Time: 12:03:14 AM PST US Subject: Yak-List: Re: Award Winner for Sale From: Elmar Hegenauer Sorry for the typo, the asking price is US$ 97,000 and NOT US$ 79,000!!! cheers Elmar ________________________________ Message 2 _____________________________________ Time: 04:20:26 AM PST US Subject: Yak-List: Re: Bulb for Yak18T rotating From: "CD 2.0" Didier, Ilia Palamodov told me they have the exact light bulbs you're looking for in stock for the Yak 18. Call him anytime and he can ship it to you. Carl tigeryak18t wrote: > Good day > > I am looking for 2 lights bulbs for the rotating of my 18T. > Diameter is 20mm two contacts (looks like BA20D type) > Anyone knows where to find those in Europe ? > > Thanks > > Didier Blouzard > +33 6 2424 3672 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353762#353762 ________________________________ Message 3 _____________________________________ Time: 04:33:00 PM PST US From: Didier Blouzard Subject: Re: Yak-List: Re: Bulb for Yak18T rotating Fantastic Carl thanks so much I will call Ilia asap tomorrow. Thanks so much Didier 2011/10/2 CD 2.0 > > Didier, > > Ilia Palamodov told me they have the exact light bulbs you're looking for > in stock for the Yak 18. > > Call him anytime and he can ship it to you. > > Carl > > > tigeryak18t wrote: > > Good day > > > > I am looking for 2 lights bulbs for the rotating of my 18T. > > Diameter is 20mm two contacts (looks like BA20D type) > > Anyone knows where to find those in Europe ? > > > > Thanks > > > > Didier Blouzard > > +33 6 2424 3672 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=353762#353762 > > -- Didier BLOUZARD didier.blouzard@gmail.com 0624243672 ________________________________ Message 4 _____________________________________ Time: 05:21:42 PM PST US Subject: Yak-List: nose section view port From: cjpilot710@aol.com Guys, I'd like to get one of those viewing windows, that are on some nose section s of the M14P. It allows one to see the gears in the nose section. It is usually put in the cap that covers the mounting boss near the 3&4 cylinder. Jim "Pappy" Goolsby ________________________________ Message 5 _____________________________________ Time: 06:54:29 PM PST US Subject: Re: Yak-List: nose section view port From: "Roger Kemp M.D." Pappy, Talk to George Coy. Doc Sent from my iPad On Oct 2, 2011, at 7:19 PM, cjpilot710@aol.com wrote: > Guys, > > I'd like to get one of those viewing windows, that are on some nose sectio ns of the M14P. It allows one to see the gears in the nose section. It is u sually put in the cap that covers the mounting boss near the 3&4 cylinder. > > Jim "Pappy" Goolsby > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 6 _____________________________________ Time: 08:36:52 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: M462RF Didier; Further to Doug's post I believe the prop shaft on the MR462 engine is a Western standard SAE 20 spline. I have not yet confirmed that observation. It is at this time just that - an observation. If correct the only readily available Western propellor would be the Hamilton Standard 2B20. However there should be Avia Propellor models in the Czech Republic designed for that engine. Cheers; Walt ----- Original Message ----- From: doug sapp To: yak-list@matronics.com Sent: Saturday, October 01, 2011 5:26 PM Subject: Re: Yak-List: M462RF Didier, Please contact me off list, I have several of these motors. I think MTV9 requires a flanged crank shaft, the M462RF is a splinded shaft motor. The spline being slightly larger in dia than that used on the HS6A 285 hp engine. Best, Doug Sapp On Sat, Oct 1, 2011 at 3:50 PM, Didier Blouzard wrote: Oh dear LIST does anyone on this LIST know where I can find spare parts and technical data for a M462RF motor. I need a tach generator, a cover for the rear shaft and probably a blade unless the MTV9 can be mounted on the shaft which I doubt. Pictures of my motor can be found here : https://picasaweb.google.com/106676445988268949228/Moteur?authuser=0&fe at=directlink Any hints contact or technical data in order to put that motor back into operation would be greatly appreciated. Thank you LIST -- Didier BLOUZARD didier.blouzard@gmail.com 0624243672 et="_blank">http://www.matronics.com/Navigator?Yak-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution ________________________________ Message 7 _____________________________________ Time: 10:18:03 PM PST US Subject: Yak-List: Yak 18T prop From: "Francois Davel" Hi there Friends My prop is coming up for overhaul, and it will have to go to the guys here in South Africa, there is only one place that will do it....the sad news, I have heard of hassles being had after the overhaul.... I am wondering what are the tricks to this overhaul? are the seals very specific? Is there anything that needs to be checked on before and after the work is done so I can be sure that the work has been done correctly! Cheers and thanks Francois Howick South Africa -------- Round Engines RULE! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353849#353849 ________________________________ Message 8 _____________________________________ Time: 10:26:12 PM PST US Subject: Yak-List: Re: Yak 18T prop From: "CD 2.0" Francois.... what propeller and aircraft models are you referring to? This would help to provide a more specific answer to your question. Carl Francois Davel wrote: > Hi there Friends > > My prop is coming up for overhaul, and it will have to go to the guys here in South Africa, there is only one place that will do it....the sad news, I have heard of hassles being had after the overhaul.... > > I am wondering what are the tricks to this overhaul? are the seals very specific? Is there anything that needs to be checked on before and after the work is done so I can be sure that the work has been done correctly! > > Cheers and thanks > > Francois Howick South Africa Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353850#353850 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.