Today's Message Index:
----------------------
1. 08:29 PM - Electric boost pump CJ6 (Okanogan Lew)
2. 09:00 PM - Re: Electric boost pump CJ6 (cjpilot710@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Electric boost pump CJ6 |
Guys, I have installed an electric fuel boost pump to replace the wobble pump in
my CJ6. It is a 3-5 psi, 32 gpm flow thru pump that will allow fuel to pass
even if it is not running. I removed the wobble pump & the lines to the check
valve & mounted the pump inside the belly with lines to the check valve the
same as the wobble pump lines. I have fuel flowing on the pressure side of the
pump, but there is no fuel flowing into the fuel pump on the engine. I think
the pump is just forcing the fuel thru the small by pass lines on the check
valve & back into the pump. I am planning to plug the small by pass lines, so
that the fuel will be pumped up to the engine. Any thoughts or suggestions?
Thanks.
Paul Lewis
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=355839#355839
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Electric boost pump CJ6 |
Make sure you have in / out lines hooked up properly.
Pappy
In a message dated 10/23/2011 11:30:01 P.M. Eastern Daylight Time,
vplewis@community.org writes:
--> Yak-List message posted by: "Okanogan Lew" <vplewis@community.org>
Guys, I have installed an electric fuel boost pump to replace the wobble
pump in my CJ6. It is a 3-5 psi, 32 gpm flow thru pump that will allow fuel
to pass even if it is not running. I removed the wobble pump & the lines
to the check valve & mounted the pump inside the belly with lines to the
check valve the same as the wobble pump lines. I have fuel flowing on the
pressure side of the pump, but there is no fuel flowing into the fuel pump on
the engine. I think the pump is just forcing the fuel thru the small by
pass lines on the check valve & back into the pump. I am planning to plug
the small by pass lines, so that the fuel will be pumped up to the engine.
Any thoughts or suggestions? Thanks.
Paul Lewis
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=355839#355839
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|