Today's Message Index:
----------------------
1. 09:31 AM - Re: New CJ oil cooler? (Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E)
2. 10:15 AM - Re: New CJ oil cooler? (Walter Lannon)
3. 11:34 AM - Re: New CJ oil cooler? (Warren Hill)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | New CJ oil cooler? |
I am not at home and do not have access to my "list" of addresses, so possibly
someone else can help, but there are several good places that will rebuild an
oil cooler. The idea here being that you can get a oil cooler that flows better
and cools better and just uses the same end pieces (the pieces on either side).
You end up with something in some cases better than new.
This has been done with several Russian oil coolers, not sure about CJ's.
Mark
________________________________
From: owner-yak-list-server@matronics.com on behalf of jrittenbach
Sent: Fri 1/27/2012 11:41 PM
Subject: Yak-List: New CJ oil cooler?
Gents, after inspecting the contributions of OPEC leaking out the oil cooler outlet
in my CJ, I've come to the conclusion that my oil cooler has sprung a leak.
Anybody have a new oil cooler setting on a shelf or know where to get one.
I have an opportunity to purchase a used one but was hoping someone on the list
might know the whereabouts of a new one. I've pulled mine out and now realize
I'd like the best chance at only having to do this once.
Thanks
--------
J Rittenbach
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=365009#365009
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New CJ oil cooler? |
Mark is correct there are many facilities that overhaul aircraft oil coolers
including the old brass & copper style used on virtually all warbird types.
Two that I have used over the years are Pacific Oil Coolers in the Los
Angeles area and Ultimate Oil Coolers in Winnipeg (Aero Recip Ltd.) Both
have done CJ6 coolers.
Question is cost of o'haul vs new if available. Check with Doug Sapp.
Walt
-----Original Message-----
From: jrittenbach
Sent: Friday, January 27, 2012 8:41 PM
Subject: Yak-List: New CJ oil cooler?
Gents, after inspecting the contributions of OPEC leaking out the oil cooler
outlet in my CJ, I've come to the conclusion that my oil cooler has sprung a
leak. Anybody have a new oil cooler setting on a shelf or know where to get
one. I have an opportunity to purchase a used one but was hoping someone on
the list might know the whereabouts of a new one. I've pulled mine out and
now realize I'd like the best chance at only having to do this once.
Thanks
--------
J Rittenbach
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=365009#365009
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New CJ oil cooler? |
Walt,
Rather than overhaul the oil cooler than came with my 1983 CJ, I got a new one
from Doug Sapp. No issues since.
Warren Hill
On Jan 28, 2012, at 11:12 AM, Walter Lannon wrote:
>
> Mark is correct there are many facilities that overhaul aircraft oil coolers
including the old brass & copper style used on virtually all warbird types. Two
that I have used over the years are Pacific Oil Coolers in the Los Angeles area
and Ultimate Oil Coolers in Winnipeg (Aero Recip Ltd.) Both have done CJ6
coolers.
>
> Question is cost of o'haul vs new if available. Check with Doug Sapp.
>
> Walt
>
> -----Original Message----- From: jrittenbach
> Sent: Friday, January 27, 2012 8:41 PM
> To: yak-list@matronics.com
> Subject: Yak-List: New CJ oil cooler?
>
>
> Gents, after inspecting the contributions of OPEC leaking out the oil cooler
outlet in my CJ, I've come to the conclusion that my oil cooler has sprung a leak.
Anybody have a new oil cooler setting on a shelf or know where to get one.
I have an opportunity to purchase a used one but was hoping someone on the
list might know the whereabouts of a new one. I've pulled mine out and now realize
I'd like the best chance at only having to do this once.
> Thanks
>
> --------
> J Rittenbach
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=365009#365009
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|