---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Wed 03/20/13: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:15 AM - Emailing: 574826_296022973821859_1429115744_n.jpg (Bradly Banks) 2. 02:51 AM - Yak 5? COIN 07 (kevin pilling) 3. 04:01 AM - Re: Emailing: 574826_296022973821859_1429115744_n.jpg (cjpilot710@aol.com) 4. 04:29 AM - Re: Emailing: 574826_296022973821859_1429115744_n.jpg (Richard Goode) 5. 06:35 AM - Yak 130 (kevin pilling) 6. 06:44 AM - Re: Emailing: 574826_296022973821859_1429115744_n.jpg (LawnDart) 7. 06:50 AM - Re: Yak 130 (Richard Goode) 8. 09:36 AM - hello This makes for interesting reading on that '52b COIN (Bradly Banks) 9. 09:49 AM - FW: hello This makes for interesting reading on that '52b COIN (Bradly Banks) 10. 01:19 PM - Re: FW: hello This makes for interesting reading on that '52b COIN (cjpilot710@aol.com) 11. 03:15 PM - Re: Looking for yak52 rear cockpit gear selector (Bitterlich, Mark G CIV NAVAIR, WD) ________________________________ Message 1 _____________________________________ Time: 12:15:18 AM PST US From: "Bradly Banks" Subject: Yak-List: Emailing: 574826_296022973821859_1429115744_n.jpg Ok who sells these and where can I get a set? Regards Brad banks ________________________________ Message 2 _____________________________________ Time: 02:51:48 AM PST US From: "kevin pilling" Subject: Yak-List: Yak 5? COIN 07 Another image of the same aircraft. ALLEDGEDLY designed for COIN duties in Afghanistan but never taken up by the Military ________________________________ Message 3 _____________________________________ Time: 04:01:01 AM PST US From: cjpilot710@aol.com Subject: Re: Yak-List: Emailing: 574826_296022973821859_1429115744_n.jpg I assume you're talking about the rocket pods. Boy I bet that 52 has a ridiculous top speed and I bet too it would want to stay out of range of a bunch of AK-47s. Those pods must weight a ton! But boy could you blow up a lot of stuff. Anyway I think those pods are a standard for Russian helicopters and ground attack A/C. I believe they fire the ARINCO S-5 rocket (about 3" x 4' ). This first time I've ever seen a picture with any armament on any CJ or Yak. Real interesting! I made rocket rails for my CJ ( 3 to a side) and use the fuel tank cover bolts as the mounting point. Total weight for a rail and 3 make believe rockets was 4 lbs. I could not measure the drag they caused but it got to be there. But I want to know more about the "RK-30" in the back. Looks like a neat looking little jet. Jim "Pappy" Goolsby In a message dated 3/20/2013 3:15:31 A.M. Eastern Daylight Time, brad@runawaymedia.co.za writes: Ok who sells these and where can I get a set? Regards Brad banks ________________________________ Message 4 _____________________________________ Time: 04:29:11 AM PST US From: "Richard Goode" Subject: RE: Yak-List: Emailing: 574826_296022973821859_1429115744_n.jpg That is the Yak - 30, a light jet trainer, of which there was also a single seat version, the 32. Six aircraft were made, two single seat and four twin seat. It was an excellent plane, but the order was given, mainly for political reasons to the Czechs for the L - 29. A couple survive, and I know one was for sale not that long ago. Richard Goode Aerobatics Rhodds Farm Lyonshall Hereford HR5 3LW Tel: +44 (0) 1544 340120 Fax: +44 (0) 1544 340129 www.russianaeros.com From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of cjpilot710@aol.com Sent: 20 March 2013 10:58 Subject: Re: Yak-List: Emailing: 574826_296022973821859_1429115744_n.jpg I assume you're talking about the rocket pods. Boy I bet that 52 has a ridiculous top speed and I bet too it would want to stay out of range of a bunch of AK-47s. Those pods must weight a ton! But boy could you blow up a lot of stuff. Anyway I think those pods are a standard for Russian helicopters and ground attack A/C. I believe they fire the ARINCO S-5 rocket (about 3" x 4' ). This first time I've ever seen a picture with any armament on any CJ or Yak. Real interesting! I made rocket rails for my CJ ( 3 to a side) and use the fuel tank cover bolts as the mounting point. Total weight for a rail and 3 make believe rockets was 4 lbs. I could not measure the drag they caused but it got to be there. But I want to know more about the "RK-30" in the back. Looks like a neat looking little jet. Jim "Pappy" Goolsby In a message dated 3/20/2013 3:15:31 A.M. Eastern Daylight Time, brad@runawaymedia.co.za writes: Ok who sells these and where can I get a set? Regards Brad banks -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ________________________________ Message 5 _____________________________________ Time: 06:35:28 AM PST US From: "kevin pilling" Subject: Yak-List: Yak 130 This one obviously did enter military service ________________________________ Message 6 _____________________________________ Time: 06:44:34 AM PST US Subject: Yak-List: Re: Emailing: 574826_296022973821859_1429115744_n.jpg From: "LawnDart" Hopefully that is a recent (year) photo; good to see the planes in that hangar getting cleaned. The hangar is at the Monino museum (Central Museum of the Air Forces) east of Moscow. Not the easiest museum to get into and that hangar is generally off limits. I was able to talk some of the young guys into letting me take a look around inside. I have quite a few pictures of this Yak. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=396645#396645 ________________________________ Message 7 _____________________________________ Time: 06:50:07 AM PST US From: "Richard Goode" Subject: RE: Yak-List: Yak 130 Hi Kevin - sorry, but it did go into service and I think something like sixty are already in service in Russia, and also orders from Algeria; Venezuela and indeed Syria (now cancelled) and a couple of others. Richard Goode Aerobatics Rhodds Farm Lyonshall Hereford HR5 3LW Tel: +44 (0) 1544 340120 Fax: +44 (0) 1544 340129 www.russianaeros.com -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of kevin pilling Sent: 20 March 2013 13:33 Subject: Yak-List: Yak 130 This one obviously did enter military service -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ________________________________ Message 8 _____________________________________ Time: 09:36:56 AM PST US From: "Bradly Banks" Subject: Yak-List: hello This makes for interesting reading on that '52b COIN http://russianplanes.net/id81511 Bradly Banks Cell:0825083200 Tel :0333308580 Email :brad@runawaymedia.co.za Skype: brad.banks10 ________________________________ Message 9 _____________________________________ Time: 09:49:58 AM PST US From: "Bradly Banks" Subject: Yak-List: FW: hello This makes for interesting reading on that '52b COIN http://igor113.livejournal.com/118787.html From: Bradly Banks [mailto:brad@runawaymedia.co.za] Sent: 20 March 2013 06:34 PM Subject: hello This makes for interesting reading on that '52b COIN http://russianplanes.net/id81511 Bradly Banks Cell:0825083200 Tel :0333308580 Email :brad@runawaymedia.co.za Skype: brad.banks10 ________________________________ Message 10 ____________________________________ Time: 01:19:37 PM PST US From: cjpilot710@aol.com Subject: Re: Yak-List: FW: hello This makes for interesting reading on that '52b COIN Geees I hate to see bird shit on airplanes. Even Yaks. ;-) Pappy In a message dated 3/20/2013 12:50:11 P.M. Eastern Daylight Time, brad@runawaymedia.co.za writes: _http://igor113.livejournal.com/118787.html_ (http://www.facebook.com/l.php?u=http://igor113.livejournal.com/118787.html&h=6AQH1G7y3) From: Bradly Banks [mailto:brad@runawaymedia.co.za] Sent: 20 March 2013 06:34 PM Subject: hello This makes for interesting reading on that '52b COIN _http://russianplanes.net/id81511_ (http://russianplanes.net/id81511) Bradly Banks Cell:0825083200 Tel :0333308580 Email :brad@runawaymedia.co.za Skype: brad.banks10 (http://www.matronics.com/Navigator?Yak-List) (http://www.matronics.com/contribution) ________________________________ Message 11 ____________________________________ Time: 03:15:01 PM PST US Subject: RE: Yak-List: Looking for yak52 rear cockpit gear selector From: "Bitterlich, Mark G CIV NAVAIR, WD" Roger, I have always wondered how that works, and if you have time possibly you can educate me. You mentioned you have several hundred hours instructing in the YAK-52. Do you charge to instruct in other owners YAK-52's, or do you rent your own aircraft out? Mark -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Roger Baker Sent: Monday, March 18, 2013 18:31 Subject: Re: Yak-List: Looking for yak52 rear cockpit gear selector I have done several hundred hours of instructing in the 52....checkouts, acro training, and spin training. I am unwilling to work in a rear cockpit in which the rear gear selector has been blocked off in neutral, removed or otherwise emasculated. My choice, of course. But the airplane was designed to be fully flyable by an IP in the rear seat...and that's the way I like it to be. YMMV Roger Baker On Mar 18, 2013, at 2:58 PM, "A. Dennis Savarese" wrote: > Fabricate a bypass (there are 3 sets of "in's and out's. ie: 6 fittings on the rear selector) and eliminate it completely from the system. It is totally unnecessary and only another point of failure due to lack of use as many people have found out. Photo attached is of a Yak 52 without a rear gear selector. > > Dennis > > A. Dennis Savarese > 334-285-6263 > 334-546-8182 (mobile) > www.yak-52.com > Skype - Yakguy1 > > On 3/18/2013 4:29 PM, Nigel Willson wrote: >> >> All, >> >> Looking for a replacement rear cockpit gear selector for a yak52. >> Current one has begun to cause problems with air leakage, and exercise of it has a limited fault curing success rate. >> I can confirm this is the selector at fault, and not a ram seal problem feeding back through the selector. >> Any bright ideas considered, but my understanding is that there are no seals inside it, just machined plates with holes positioned for selection purposes. >> So... If anyone has a GOOD one they are willing to part with, please contact me off list. >> I am in the uk. >> >> Regards >> >> Nigel Willson >> Nigel@yakdisplay.com >> >> >> >> >> > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.