---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Mon 04/15/13: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:58 AM - yak 50 elevators (woody664722) 2. 06:34 AM - Re: yak 50 elevators (Roger Kemp) 3. 07:10 AM - Re: yak 50 elevators (bill wade) 4. 05:27 PM - Yak buyer questions (Mozam) 5. 05:39 PM - Re: Yak buyer questions (Mark Weidhaas) 6. 07:15 PM - Re: yak 50 elevators (Roger Kemp M.D.) 7. 08:19 PM - Re: Yak buyer questions (George Coy) 8. 09:03 PM - Re: Nanchang CJ6 for China Airshow (JayLand) 9. 11:30 PM - Re: yak 50 elevators (woody664722) ________________________________ Message 1 _____________________________________ Time: 12:58:15 AM PST US Subject: Yak-List: yak 50 elevators From: "woody664722" Help required !! i`m looking for a manual or a drawing that shows how to remove and refit elevators to a yak 50 , and how to re-balance the elevator post re-fabric and paint . any help or info on where to get this information would me great . thanks woody -------- steve wood Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398629#398629 ________________________________ Message 2 _____________________________________ Time: 06:34:37 AM PST US From: Roger Kemp Subject: Re: Yak-List: yak 50 elevators not one. Have not done that so far on my 50 but the tails are the same as the 52. Doc -----Original Message----- >From: woody664722 >Sent: Apr 15, 2013 2:55 AM >To: yak-list@matronics.com >Subject: Yak-List: yak 50 elevators > > >Help required !! > > i`m looking for a manual or a drawing that shows how to remove and refit elevators to a yak 50 , and how to re-balance the elevator post re-fabric and paint . > > any help or info on where to get this information would me great . > >thanks woody > >-------- >steve wood > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=398629#398629 > > ________________________________ Message 3 _____________________________________ Time: 07:10:13 AM PST US From: bill wade Subject: Re: Yak-List: yak 50 elevators Doc a few years ago I needed a rudder for my Yak 52 and got one from GESOCO the fabric was off-both rudders-well long story short-I got-a yak 50 rudder it looked the same had the same dimensions but-was designed - e ngineered completely different the hing pins were also smaller I couldn't u se it. My fix was to contact the factory and get the right parts and have a local mechanic install them. George sold the rudder as a Yak 50 shortly th ere after. So there is a difference in the rudder. Woody I would suggest co ntacting the factory=0ABill Wade=0A=0AFrom: Roger Kemp =0ATo: yak-list@matronics.com =0ASent: Monday, April 15, 2013 9:31 AM =0ASubject: Re: Yak-List: yak 50 elevators=0A=0A=0A--> Yak-List message pos ted by: Roger Kemp =0A=0Anot one. Have not done th at so far on my 50 but the tails are the same as the 52. =0ADoc=0A=0A=0A--- --Original Message-----=0A>From: woody664722 =0A>Sent : Apr 15, 2013 2:55 AM=0A>To: yak-list@matronics.com=0A>Subject: Yak-List: henwood8@aol.com>=0A>=0A>Help required !!=0A>=0A> i`m looking for a manual or a drawing that shows how to remove and refit elevators to a yak 50 , and how to re-balance the elevator post re-fabric and paint . =0A>=0A> any hel p or info on where to get this information would me great .=0A>=0A>thanks w oody=0A>=0A>--------=0A>steve wood=0A>=0A>=0A>=0A>=0A>Read this topic onlin e here:=0A>=0A>http://forums.matronics.com/viewtopic.php?p=398629#398629 == ________________________________ Message 4 _____________________________________ Time: 05:27:22 PM PST US Subject: Yak-List: Yak buyer questions From: "Mozam" Folks, I have finally convinced a friend to buy a Yak-52. He is actively searching now. There are two Yaks on Barnstormers he is interested in. One is in Seabrook , TX, and the other in Edgewater, FL. Do any of you guys have any knowledge about these plane's history and condition? Thanks, Steve Dalton Yak-52TW Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398673#398673 ________________________________ Message 5 _____________________________________ Time: 05:39:09 PM PST US Subject: Re: Yak-List: Yak buyer questions From: Mark Weidhaas Hi Steve There are two in Southern California that are also available. Email Roger Baker at f4ffm2@roadrunner.com Mark "Weeds" On Apr 15, 2013 5:29 PM, "Mozam" wrote: > > Folks, > > I have finally convinced a friend to buy a Yak-52. He is actively > searching now. > > There are two Yaks on Barnstormers he is interested in. One is in Seabrook > , TX, and the other in Edgewater, FL. > > Do any of you guys have any knowledge about these plane's history and > condition? > > Thanks, > Steve Dalton > Yak-52TW > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=398673#398673 > > ________________________________ Message 6 _____________________________________ Time: 07:15:08 PM PST US Subject: Re: Yak-List: yak 50 elevators From: "Roger Kemp M.D." Bill, Thanks for letting me know this. I would assume they were the same. Doc Sent from my iPad On Apr 15, 2013, at 9:07 AM, bill wade wrote: > Doc a few years ago I needed a rudder for my Yak 52 and got one from GESOC O the fabric was off both rudders well long story short I got a yak 50 rudde r it looked the same had the same dimensions but was designed - engineered c ompletely different the hing pins were also smaller I couldn't use it. My fi x was to contact the factory and get the right parts and have a local mechan ic install them. George sold the rudder as a Yak 50 shortly there after. So t here is a difference in the rudder. Woody I would suggest contacting the fac tory > Bill Wade > > From: Roger Kemp > To: yak-list@matronics.com > Sent: Monday, April 15, 2013 9:31 AM > Subject: Re: Yak-List: yak 50 elevators > > > not one. Have not done that so far on my 50 but the tails are the same as t he 52. > Doc > > > -----Original Message----- > >From: woody664722 > >Sent: Apr 15, 2013 2:55 AM > >To: yak-list@matronics.com > >Subject: Yak-List: yak 50 elevators > > > > > >Help required !! > > > > i`m looking for a manual or a drawing that shows how to remove and refit elevators to a yak 50 , and how to re-balance the elevator post re-fabric a nd paint . > > > > any help or info on where to get this information would me great . > > > >thanks woody > > > >-------- > >steve wood > > > > > > > > > >Read this topic online here: > > > >http://forums.matronics.com/viewtopic.php?p=398629#398629 > > > > > > > >p; -M=== > > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 7 _____________________________________ Time: 08:19:12 PM PST US Subject: Re: Yak-List: Yak buyer questions From: George Coy Steve, i know of two more that are about to be listed Sent from my iPad On Apr 15, 2013, at 7:24 PM, "Mozam" wrote: > > Folks, > > I have finally convinced a friend to buy a Yak-52. He is actively searching now. > > There are two Yaks on Barnstormers he is interested in. One is in Seabrook , TX, and the other in Edgewater, FL. > > Do any of you guys have any knowledge about these plane's history and condition? > > Thanks, > Steve Dalton > Yak-52TW > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=398673#398673 > > > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 09:03:32 PM PST US Subject: Re: Yak-List: Nanchang CJ6 for China Airshow From: JayLand Wei Chen I tried to send you an email but it bounced from the email listed below. Please send me details on this. Thanks, Jay Land On 4/12/13 11:25 AM, "Wei Chen" wrote: > All, > > We all look for fun flying activities. How about flying Nanchang CJ6 in > China's largest airshow! Sounds interesting?! It can happen this year. > > China International General Aviation Convention will be held at Xi'an China > from October 18th to 22nd, 2013. It is the largest general aviation show in > China. The convention organizer asked me to bring two Nanchang CJ6 to perform > in the air show. I have committed to ship my Nanchang CJ6-A to the show and am > looking for another Nanchang CJ6. This will be the first time civilian > Nanchang CJ6 will perform in China's airshow. (The PLA has a CJ6 air show > team.) > > Also, all the expenses will be paid by the convention, including shipping the > airplane, commercial flights, hotels, etc. > > If you are interested to ship your Nanchang CJ6 to China and do the > performance, please email me directly. I will explain why the convention asks > me to bring CJ6 to China and perform the air show when all Nanchang CJ6 are > manufactured in China. > > It will be a lot of fun. > > Fly Safe! > > > Wei Chen > CJ6 Owner N269P > Memphis, TN > 901-270-0178 > weichen@sunshinet.com > > > > ________________________________ Message 9 _____________________________________ Time: 11:30:56 PM PST US Subject: Yak-List: Re: yak 50 elevators From: "woody664722" Thanks for your help with this , i will contact the factory today to see what they have to say about the elevators -------- steve wood Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398695#398695 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.