---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sat 04/27/13: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:13 AM - Re: Re: Hydraulic lock (Jill Gernetzke) 2. 07:25 AM - Yk 52 for sale (George Coy) ________________________________ Message 1 _____________________________________ Time: 07:13:42 AM PST US From: "Jill Gernetzke" Subject: RE: Yak-List: RE: Hydraulic lock Mark & Group, What is critical in assessing the potential for damage to the accessory shaft on a prop strike is the rate of deceleration. If you have a 3-bladed metal Hartzell prop on your plane and hit a fire hydrant at idle, the potential for damage is much greater than a high speed pass down the runway, shave the tips of the blades on a wood or composite prop. >From the AI-14RA Engine Maintenance Manual: "In case of propeller blade damage/broken or cracked/ at distance exceeding 1m/3.3 ft./ from the engine axis without sharp braking due to striking against ground irregularities - the engine may be used after replacement of propeller. In other cases send the engine to manufacturing plant or specialized workshop for inspection." Bear in mind, this is referring to the wood, composite Wilga blades. The AI-14 also has a weaker planetary system than the M-14P. And then you have the Service Bulletin issued by OKBM: http://www.termikas.com/engines/M-14P/direktyva_angl.jpg (One must ask what motivated the factory to issue this bulletin. The repair factory in Shakhty did most of the overhauls on the M-14P, not OKBM.) Have a great weekend, group! Jill ________________________________ Message 7 _____________________________________ Time: 12:02:54 PM PST US Subject: RE: Yak-List: RE: Hydraulic lock From: "Bitterlich, Mark G CIV NAVAIR, WD" Good answer again Jill. Thank you. I wrote a separate message about an engine that had a prop strike when the left gear collapsed after touch-down. It took off after about a foot on either end of the stock prop was ground off, then flew around the pattern and landed. The engine was at idle, and the pilot stated that he never even knew it happened until after he finally landed. I.E. No sudden stop. The engine has since had about 300 hours put on it with no problem what-so-ever. Which is not to say it was not inspected, it was. However, it was not totally torn down, only partially. Some of the decisions were based on what your company published some time ago concerning prop strikes based on the training they had received in Russia. It seems it turned out to be the proper decision based on good information. The problem with replacing the engine is that you really don't know what you're going to end up with there either. Hope for the best, but train for the worst as they say. In the end, my opinion is that there is a term called "PROP STRIKE!" that we try to quantify into something that requires an exact action, no matter what. This is what the FAA leans towards and if specific information on the engine is unknown, they will also tend to apply information made for other engines that they consider similar. This is of course in many cases totally incorrect. Is the engine geared? What about specific weak points (Accessory Shaft for instance)? These are not the same from engine type to engine type even if they do both happen to be "Radials". So EVERY case is unique and the actions taken can vary within a fairly large margin, insurance companies and liabilities excepted. The other take-away from discussions like this is to realize that the FAA reads the YAK LIST. This is not a guess. I know it for a fact. I was confronted by an FAA Inspector for what I said on this list one time and while some may say "so what, FREE SPEECH!", the fact is that when confronted by these guys, it is not a fun experience no matter how much "in the right" you might happen to be. Giving credit where credit is due, I've eventually seen them make some good decisions, but the time span in the interim is not something anyone wants to experience. So while sharing good information is what this list is all about, I would offer this one tiny suggestion: "WALLS HAVE EARS" Be careful not to make arguments in public that could turn around and bite you in the tail later on. Of course this is the "Pot calling the Kettle Black", but hey, I'm learning. Mark -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Jill Gernetzke Sent: Friday, April 26, 2013 13:29 Subject: Yak-List: RE: Hydraulic lock Additionally, the calculations for torque at full power are 641 ft/lbs on the crankshaft and 936 ft/lbs on the prop shaft. (Double-check of the calculations are welcome.) The numbers in the previous post were for a typical prop strike which is at near idle on an "Oh, %*&$!" gear up landing. We have had some sudden stoppage prop strikes where we fully expected damage to the accessory shaft and there was no damage. This comes back to design limit loads on the individual components and how much over those limits the parts are engineered to. I do not have that engineering data. Mark, the prop strike teardown boils down to the insurance companies and also, the ultimate peace of mind of the owner and subsequent buyers of the aircraft. This is a judgment call; which we handle on a case by case basis. For practical discussion, much of what dictates the prop strike teardown - in the U.S. - is liability. Jill -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak-List Digest Server Sent: Thursday, April 25, 2013 12:02 AM Subject: Yak-List Digest: 1 Msgs - 04/24/13 * ================================================ Online Versions of Today's List Digest Archive ================================================ Today's complete Yak-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the Yak-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Cha pter 13-04-24&Archive=Yak Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chap ter 2013-04-24&Archive=Yak ============================================== EMail Version of Today's List Digest Archive ============================================== ---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Wed 04/24/13: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:24 AM - Re: Re: Re: Hydraulic Lock (Bitterlich, Mark G CIV NAVAIR, WD) ________________________________ Message 1 _____________________________________ Time: 08:24:17 AM PST US Subject: RE: Yak-List: Re: Re: Hydraulic Lock From: "Bitterlich, Mark G CIV NAVAIR, WD" Actually this is very good information to keep in mind, and I am going to chew on the physics of that answer for a day or two. It poses a very interesting study in the stresses involved and should make for a rather intense dinner table debate! :-) (Not you, my engineering friends!) Thanks for writing back Jill. So given this information, what is the advice of M14P.com regarding prop strikes and what should be done to the engine afterwards? Mark -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Jill Gernetzke Sent: Tuesday, April 23, 2013 16:56 Subject: Yak-List: Re: Re: Hydraulic Lock Good feedback, Mark. Most prop strikes occur with wood composite or carbon fiber blades. (We haven't had a prop strike teardown with a metal prop, yet.) The inertia of energy is absorbed by the blades disintegrating or being shaved off. I agree with your assessment of a hydraulic lock on startup, but not when the engine fires and it pulls fuel or oil in from the intake tubes. If it fires, there is a good likelihood that the accessory shaft will twist. At landing speed, the aircraft travels 3.5 feet for each blade in contact with the ground at initial point of contact. As the engine slows, this increases. Consequently, the rearward deflection of a very thin blade exceeds the rotational shearing. Additionally, the reduction of blade length per rotation with a normal flare landing is less than a tenth of an inch. In other words, the wood fails well before any engine parts are stressed to the +400 foot/lbs of torque design load. Jill ________________________________ Message 2 _____________________________________ Time: 07:25:24 AM PST US From: "George Coy" Subject: Yak-List: Yk 52 for sale We have a very low time 1993 Yak-52 available that has lived its whole life in the USA. Contact me off list. George.coy@gmail.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.