---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sat 06/22/13: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:04 AM - Re: Yak-52 pneumatic in-line air filter (A. Dennis Savarese) 2. 03:31 PM - Parts (=?utf-8?Q?H=C3=A5vard_Dale?=) 3. 03:31 PM - Parts (=?utf-8?Q?H=C3=A5vard_Dale?=) 4. 06:35 PM - Re: Parts (Dale) 5. 07:48 PM - wrenches (Jon Boede) ________________________________ Message 1 _____________________________________ Time: 08:04:09 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Yak-52 pneumatic in-line air filter No, it is impossible to see through the other side.=0A=0AThe best thing to do is use the original filter as a B nut adapter and install Doug Sapp's SS filter.- I provided Doug installation instructions to install it on a Ya k 52.- Drill out the old filter, flush it out thoroughly and reinstall it .- Then follow the instructions to fabricate the hoses.- Mount the filt er with 4 Adel clamps on the upper engine mount arm above the large air-oil separator.=0A=0AI you can't find the installation drawing, email me off li st and I will send it to you.=0ADennis=0Adsavarese0812@bellsouth.net.=0A=0A =0A=0A=0A=0A=0A________________________________=0A From: "flying@jeffhove.c om" =0ATo: yak-list@matronics.com =0ASent: Friday, Jun e 21, 2013 5:24 PM=0ASubject: Yak-List: Yak-52 pneumatic in-line air filter ake off the pneumatic system air filter from the Yak-52 firewall=0Aand look into one opening, is it proper to see through to the other side?=0A=0AIt l ooks like the air has blasted straight through whatever element was=0Athere .=0AA maintenance manual diagram shows this should have a disk element held =0Awith a spring.- Is the element replaceable?=0A=0AThe case has two pair s of dimples or holes around the threaded seam, like=0Ait was staked or has very small drift-pins to prevent unscrewing it.- How=0Ado you open it wi thout damage?=0A=0AThe Matronics archives show a lot of discussion about th e CJ's desiccant=0Afilter, but not much about the Yak's, and the maintenanc e documents I've=0Afound don't mention servicing this item.=0A=0ABlue Skies =========================0A =================== ________________________________ Message 2 _____________________________________ Time: 03:31:51 PM PST US From: =?utf-8?Q?H=C3=A5vard_Dale?= Subject: Yak-List: Parts Hi, In need of upper 52 cowling and R/H aileron. Anyone have that for sale? Best regards Havard Sendt fra min iPad Den 21. juni 2013 kl. 09:02 skrev Yak-List Digest Server : > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Yak-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Yak-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-06-20&Archive=Yak > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-06-20&Archive=Yak > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Yak-List Digest Archive > --- > Total Messages Posted Thu 06/20/13: 6 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 03:24 PM - Chip detector light (Byron Fox) > 2. 03:59 PM - Re: Chip detector light (Tom Elliott) > 3. 04:05 PM - Re: Chip detector light (doug sapp) ________________________________ Message 3 _____________________________________ Time: 03:31:51 PM PST US From: =?utf-8?Q?H=C3=A5vard_Dale?= Subject: Yak-List: Parts Hi, In need of upper 52 cowling and R/H aileron. Anyone have that for sale? Best regards Havard Sendt fra min iPad Den 21. juni 2013 kl. 09:02 skrev Yak-List Digest Server : > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Yak-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Yak-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-06-20&Archive=Yak > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-06-20&Archive=Yak > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Yak-List Digest Archive > --- > Total Messages Posted Thu 06/20/13: 6 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 03:24 PM - Chip detector light (Byron Fox) > 2. 03:59 PM - Re: Chip detector light (Tom Elliott) > 3. 04:05 PM - Re: Chip detector light (doug sapp) ________________________________ Message 4 _____________________________________ Time: 06:35:36 PM PST US Subject: Yak-List: Re: Parts From: "Dale" The guy on ebay parting out the 52 would have had that. Don't know if he still does. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=403179#403179 ________________________________ Message 5 _____________________________________ Time: 07:48:23 PM PST US From: Jon Boede Subject: Yak-List: wrenches I've been shopping for tools lately and came across something that might be of interest to y'all. Sears sells a 7 piece open end wrench set that has: 6/8=2C 7/9=2C 10/11=2C 12/14=2C 13/15=2C 16/18=2C and 17/19 in it. We have a lot of Soviet tools that came with the stuff at the museum and I' ve never seen a 13=2C 15=2C 16=2C or 18 in them. I don't recall those sizes on a CJ=2C either. Or maybe=2C but super rare s ize. So if you realize the 6/8 and 7/9 are mostly "nice to have" ... a huge amou nt of what needs done on the CJ can be done with _3 wrenches_. Good idea to throw them in your travel bag? Sears' SKU is 44188. $27. Ma de in the US of A. I also found www.toolfoam.com where I'm sure their "regular" prices are fri ghtening but their "specials" had some things that worked out just perfectl y for me. My new toolbox is getting the full military tool control treatme nt. :-) Jon ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.