---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Wed 08/14/13: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:53 AM - Re: CJ pneumatic system (Elmar & Manuela Hegenauer) 2. 07:59 AM - Re: CJ6 (Housai) temp problem (Elmar & Manuela Hegenauer) 3. 08:29 AM - Re: CJ Prop Blade (Elmar & Manuela Hegenauer) 4. 08:47 AM - Re: CJ pneumatic system (keithmckinley) 5. 07:32 PM - CJ Oil Cooler Drain - Can't Remove (ChangDriver) 6. 09:17 PM - Re: CJ Oil Cooler Drain - Can't Remove (KingCJ6@aol.com) 7. 10:00 PM - Re: CJ Oil Cooler Drain - Can't Remove (cjpilot710@aol.com) 8. 10:09 PM - Re: CJ Oil Cooler Drain - Can't Remove (Roger Kemp M.D.) 9. 10:15 PM - Re: CJ Oil Cooler Drain - Can't Remove (cjpilot710@aol.com) ________________________________ Message 1 _____________________________________ Time: 07:53:51 AM PST US From: Elmar & Manuela Hegenauer Subject: Yak-List: Re: CJ pneumatic system Hi Keith, thank you very much for posting this masterpiece of drawing, kudos to the author. cheers Elmar ________________________________ Message 2 _____________________________________ Time: 07:59:16 AM PST US From: Elmar & Manuela Hegenauer Subject: Yak-List: Re: CJ6 (Housai) temp problem Phil, Keith might have a point. Did you check the accuracy of your Cyl.-head-temp gauge set-up??? The lead from the thermocouple to the instrument has a fabric insulation what disintegrates over the years. If that happens your readings will be off and inaccurate(ly). As far as I remember, Doug Sapp has those leads in stock and that might be a cheap fix for your problem. Good luck. cheers Elmar ________________________________ Message 3 _____________________________________ Time: 08:29:46 AM PST US From: Elmar & Manuela Hegenauer Subject: Yak-List: Re: CJ Prop Blade I have a pair of pickledand matching prop blades with 300 hours on them since new. They come in a designated shipping crate and with the appropriate paperwork. If interested, I am asking US$900 for the pair. cheers Elmar ________________________________ Message 4 _____________________________________ Time: 08:47:40 AM PST US Subject: Yak-List: Re: CJ pneumatic system From: "keithmckinley" I wish I knew who to give credit to!! And selfishly hope he does one for the electrical and fuel system!!!! -------- Keith McKinley 700HS X26 Sebastian, FL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406708#406708 ________________________________ Message 5 _____________________________________ Time: 07:32:40 PM PST US Subject: Yak-List: CJ Oil Cooler Drain - Can't Remove From: "ChangDriver" Any advice on how to get the oil cooler drain plug off the oil cooler. I have a 14 inch crescent wrench that won't budge it. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406734#406734 ________________________________ Message 6 _____________________________________ Time: 09:17:32 PM PST US From: KingCJ6@aol.com Subject: Re: Yak-List: CJ Oil Cooler Drain - Can't Remove Buy a quality, 6-point long metric combination wrench. I think it's same size as the main air tank drain valve, also hard to remove. A worthwhile investment to avoid rounding the nuts. Dave In a message dated 8/14/2013 7:33:02 P.M. Pacific Daylight Time, capav8r@gmail.com writes: --> Yak-List message posted by: "ChangDriver" Any advice on how to get the oil cooler drain plug off the oil cooler. I have a 14 inch crescent wrench that won't budge it. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406734#406734 ________________________________ Message 7 _____________________________________ Time: 10:00:20 PM PST US From: cjpilot710@aol.com Subject: Re: Yak-List: CJ Oil Cooler Drain - Can't Remove I slipped a 4 foot pipe over the wrench handle. Them there Chinese are strong little folks. ;-) Pappy In a message dated 8/14/2013 10:33:04 P.M. Eastern Daylight Time, capav8r@gmail.com writes: --> Yak-List message posted by: "ChangDriver" Any advice on how to get the oil cooler drain plug off the oil cooler. I have a 14 inch crescent wrench that won't budge it. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406734#406734 ________________________________ Message 8 _____________________________________ Time: 10:09:06 PM PST US Subject: Re: Yak-List: CJ Oil Cooler Drain - Can't Remove From: "Roger Kemp M.D." You may regret it when you do for it will leak afterwards if it is anything like the YAK. Finally stopped it with fuel lube. Doc Sent from my iPad On Aug 14, 2013, at 9:29 PM, "ChangDriver" wrote: > > Any advice on how to get the oil cooler drain plug off the oil cooler. I have a 14 inch crescent wrench that won't budge it. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=406734#406734 > > > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 10:15:20 PM PST US From: cjpilot710@aol.com Subject: Re: Yak-List: CJ Oil Cooler Drain - Can't Remove Naaaaa. Just put it back on with the same 4 foot pipe. ;>p Pappy In a message dated 8/15/2013 1:09:21 A.M. Eastern Daylight Time, viperdoc@mindspring.com writes: --> Yak-List message posted by: "Roger Kemp M.D." You may regret it when you do for it will leak afterwards if it is anything like the YAK. Finally stopped it with fuel lube. Doc Sent from my iPad On Aug 14, 2013, at 9:29 PM, "ChangDriver" wrote: > --> Yak-List message posted by: "ChangDriver" > > Any advice on how to get the oil cooler drain plug off the oil cooler. I have a 14 inch crescent wrench that won't budge it. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=406734#406734 > > > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.