---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Mon 09/16/13: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:16 AM - Re: Re: Upcoming RPA T-Shirt Design (Bill Geipel) 2. 05:18 AM - Re: CJ6 belly landing video (Bill Geipel) 3. 06:27 AM - Re: CJ6 belly landing video (Barry Hancock) 4. 06:35 AM - Re: CJ6 belly landing video (cjpilot710@aol.com) 5. 07:00 AM - Re: CJ6 belly landing video (Roger Kemp M.D.) 6. 07:11 AM - Re: CJ6 belly landing video (Michael B. Cavanagh) 7. 08:24 AM - Re: Re: Upcoming RPA T-Shirt Design (Byron M Fox) 8. 09:09 AM - Re: CJ6 belly landing video (Kurt Howerton) 9. 09:48 AM - Re: CJ6 belly landing video (Hank Gibson) 10. 07:50 PM - Re: CJ wheel bearing removal (keithmckinley) 11. 07:50 PM - Re: CJ wheel bearing removal (keithmckinley) ________________________________ Message 1 _____________________________________ Time: 05:16:33 AM PST US Subject: Re: Yak-List: Re: Upcoming RPA T-Shirt Design From: Bill Geipel Any YAK shirts? On Sep 15, 2013, at 23:24, Byron Fox wrote: > > Yes Keith in about six weeks. > > Blitz Fox > 415-307-2405 > > On Sep 15, 2013, at 7:36 PM, "keithmckinley" wrote: > >> >> Looks fantastic Blitz. Only through RPA? >> >> -------- >> Keith McKinley >> 700HS >> X26 Sebastian, FL >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=408644#408644 >> >> >> >> >> >> >> >> >> >> > > > > ________________________________ Message 2 _____________________________________ Time: 05:18:57 AM PST US Subject: Re: Yak-List: CJ6 belly landing video From: Bill Geipel OOps! Eh. On Sep 16, 2013, at 1:29, Olivier Vigneron wrote: > > http://www.youtube.com/watch?v=DrpbsC5eXK0 > > Olivier > > > ________________________________ Message 3 _____________________________________ Time: 06:27:51 AM PST US From: Barry Hancock Subject: Re: Yak-List: CJ6 belly landing video If I'm not mistaken I checked that guy out in Calgary about 4 years ago.... Barry Hancock Worldwide Warbirds, Inc. "Making your aviation dreams a reality" www.worldwidewarbirds.com 801-899-5313 Please excuse typos and brevity...sent from my iPhone On Sep 16, 2013, at 6:16 AM, Ahmed Ragheb wrote: > Well, it isn't an Air issue, his flap is down. Would be interesting to ge t the details > > Med > > On Sep 16, 2013, at 6:56 AM, cjpilot710@aol.com wrote: > >> This would make good clip in a training video. Was this intentional (gea r failure) or screw up? =46rom the a/c registration it looks like its Canad ian? >> Pappy. >> >> In a message dated 9/16/2013 2:32:49 A.M. Eastern Daylight Time, ssssskip py@gmail.com writes: >> >> http://www.youtube.com/watch?v=DrpbsC5eXK0 >> >> Olivier >> >> ========================== ========= ========================== ========= ========================== ========= ========================== ========= >> > ________________________________ Message 4 _____________________________________ Time: 06:35:56 AM PST US From: cjpilot710@aol.com Subject: Re: Yak-List: CJ6 belly landing video If the rear cockpit gear handle was UP than the front cockpit gear handle will not be working. Pappy In a message dated 9/16/2013 9:16:40 A.M. Eastern Daylight Time, bhancock@worldwidewarbirds.com writes: If I'm not mistaken I checked that guy out in Calgary about 4 years ago.... Barry Hancock Worldwide Warbirds, Inc. "Making your aviation dreams a reality" _www.worldwidewarbirds.com_ (http://www.worldwidewarbirds.com/) 801-899-5313 Please excuse typos and brevity...sent from my iPhone On Sep 16, 2013, at 6:16 AM, Ahmed Ragheb <_ARagheb@aol.com_ (mailto:ARagheb@aol.com) > wrote: Well, it isn't an Air issue, his flap is down. Would be interesting to get the details Med On Sep 16, 2013, at 6:56 AM, _cjpilot710@aol.com_ (mailto:cjpilot710@aol.com) wrote: This would make good clip in a training video. Was this intentional (gear failure) or screw up? From the a/c registration it looks like its Canadian? Pappy. In a message dated 9/16/2013 2:32:49 A.M. Eastern Daylight Time, _ssssskippy@gmail.com_ (mailto:ssssskippy@gmail.com) writes: http://www.youtube.com/watch?v=DrpbsC5eXK0 Olivier ________________________________ Message 5 _____________________________________ Time: 07:00:20 AM PST US Subject: Re: Yak-List: CJ6 belly landing video From: "Roger Kemp M.D." The exact reason why my rear gear handle is safety wired to the neutral posi tion. Not a big deal currently since I have ripped my air system out chasing an ai r leak! What fun getting a none shear cotter pin out of the the top shoulder bolt that mounts the actuator to the gear box! If it's not one airplane it is another! Doc Sent from my iPad On Sep 16, 2013, at 8:33 AM, cjpilot710@aol.com wrote: > If the rear cockpit gear handle was UP than the front cockpit gear handle w ill not be working. Pappy > > In a message dated 9/16/2013 9:16:40 A.M. Eastern Daylight Time, bhancock@ worldwidewarbirds.com writes: > If I'm not mistaken I checked that guy out in Calgary about 4 years ago... .. > > Barry Hancock > Worldwide Warbirds, Inc. > "Making your aviation dreams a reality" > www.worldwidewarbirds.com > 801-899-5313 > Please excuse typos and brevity...sent from my iPhone > > On Sep 16, 2013, at 6:16 AM, Ahmed Ragheb wrote: > >> Well, it isn't an Air issue, his flap is down. Would be interesting to g et the details >> >> Med >> >> On Sep 16, 2013, at 6:56 AM, cjpilot710@aol.com wrote: >> >>> This would make good clip in a training video. Was this intentional (ge ar failure) or screw up? =46rom the a/c registration it looks like its Cana dian? >>> Pappy. >>> >>> In a message dated 9/16/2013 2:32:49 A.M. Eastern Daylight Time, ssssski ppy@gmail.com writes: >>> >>> http://www.youtube.com/watch?v=DrpbsC5eXK0 >>> >>> Olivier >>> >>> >>> ="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.co m/Navigator?Yak-List >>> s.matronics.com/">http://forums.matronics.com >>> p://www.matronics.com/contribution">http://www.matronics.com/contributio n >>> > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 6 _____________________________________ Time: 07:11:19 AM PST US From: "Michael B. Cavanagh" Subject: Re: Yak-List: CJ6 belly landing video Amen... On Sep 16, 2013, at 8:58 AM, Roger Kemp M.D. wrote: > The exact reason why my rear gear handle is safety wired to the neutral position. > Not a big deal currently since I have ripped my air system out chasing an air leak! What fun getting a none shear cotter pin out of the the top shoulder bolt that mounts the actuator to the gear box! > If it's not one airplane it is another! > Doc > > Sent from my iPad > > On Sep 16, 2013, at 8:33 AM, cjpilot710@aol.com wrote: > >> If the rear cockpit gear handle was UP than the front cockpit gear handle will not be working. Pappy >> >> In a message dated 9/16/2013 9:16:40 A.M. Eastern Daylight Time, bhancock@worldwidewarbirds.com writes: >> If I'm not mistaken I checked that guy out in Calgary about 4 years ago.... >> >> Barry Hancock >> Worldwide Warbirds, Inc. >> "Making your aviation dreams a reality" >> www.worldwidewarbirds.com >> 801-899-5313 >> Please excuse typos and brevity...sent from my iPhone >> >> On Sep 16, 2013, at 6:16 AM, Ahmed Ragheb wrote: >> >>> Well, it isn't an Air issue, his flap is down. Would be interesting to get the details >>> >>> Med >>> >>> On Sep 16, 2013, at 6:56 AM, cjpilot710@aol.com wrote: >>> >>>> This would make good clip in a training video. Was this intentional (gear failure) or screw up? =46rom the a/c registration it looks like its Canadian? >>>> Pappy. >>>> >>>> In a message dated 9/16/2013 2:32:49 A.M. Eastern Daylight Time, ssssskippy@gmail.com writes: >>>> >>>> http://www.youtube.com/watch?v=DrpbsC5eXK0 >>>> >>>> Olivier >>>> >>>> >>>> ="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/ Navigator?Yak-List >>>> s.matronics.com/">http://forums.matronics.com >>>> p://www.matronics.com/contribution">http://www.matronics.com/contribution >>>> >>> >> >> >> >> > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D > ________________________________ Message 7 _____________________________________ Time: 08:24:00 AM PST US Subject: Re: Yak-List: Re: Upcoming RPA T-Shirt Design From: Byron M Fox Yak shirt coming, Bill. Blitz Fox 415-307-2405 On Sep 16, 2013, at 5:14 AM, Bill Geipel wrote: > > Any YAK shirts? > > > > On Sep 15, 2013, at 23:24, Byron Fox wrote: > >> >> Yes Keith in about six weeks. >> >> Blitz Fox >> 415-307-2405 >> >> On Sep 15, 2013, at 7:36 PM, "keithmckinley" wrote: >> >>> >>> Looks fantastic Blitz. Only through RPA? >>> >>> -------- >>> Keith McKinley >>> 700HS >>> X26 Sebastian, FL >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=408644#408644 > > > > ________________________________ Message 8 _____________________________________ Time: 09:09:25 AM PST US Subject: Re: Yak-List: CJ6 belly landing video From: Kurt Howerton Lifting it and extending the gear: http://youtu.be/KBvLW7Rq3YI -- Kurt "It" Howerton N923YK 916-282-9231 http://cj6.scitechsys.com http://www.baybombersquadron.com On Sun, Sep 15, 2013 at 11:29 PM, Olivier Vigneron wrote: > > http://www.youtube.com/watch?v=DrpbsC5eXK0 > > Olivier > > * > > * > > ________________________________ Message 9 _____________________________________ Time: 09:48:55 AM PST US From: Hank Gibson Subject: Re: Yak-List: CJ6 belly landing video strong like Chinese tractor!!- Launch it!=0A=0AHank Gibson=0A904-738-3240 Mobile=0A904-213-1760 Home=0Ahkgibby@yahoo.com=0Ahkgibson@fnf.com=0A-=0A =0A=0A________________________________=0A From: Kurt Howerton =0ATo: "yak-list@matronics.com" =0ASent: Monday, September 16, 2013 12:06 PM=0ASubject: Re: Yak-List: CJ6 belly land ing video=0A =0A=0A=0ALifting it and extending the gear:=0Ahttp://youtu.be /KBvLW7Rq3YI=0A=0A=0A=0A--=0AKurt "It" Howerton=0AN923YK=0A916-282-9231=0Ah ttp://cj6.scitechsys.com/=0Ahttp://www.baybombersquadron.com/=0A =0A=0A =0AOn Sun, Sep 15, 2013 at 11:29 PM, Olivier Vigneron wrote:=0A=0A=0A>=0A>http://www.youtube.com/watch?v=DrpbsC5eXK0=0A>=0A> =0A>=0A>Olivier =0A>et="_blank">http://www.matronics.com/Navigator?Yak-L ist=0Atp://forums.matronics.com=0A_blank">http://www.matronics.com/contribu ============== ________________________________ Message 10 ____________________________________ Time: 07:50:50 PM PST US Subject: Yak-List: Re: CJ wheel bearing removal From: "keithmckinley" The bearing removal tool supplied by Doug pulled the bearing off with ease. Forget the pry bars, screwdrivers, dry ice, etc. Best 95 bucks I've spent. -------- Keith McKinley 700HS X26 Sebastian, FL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=408710#408710 ________________________________ Message 11 ____________________________________ Time: 07:50:50 PM PST US Subject: Yak-List: Re: CJ wheel bearing removal From: "keithmckinley" The bearing removal tool supplied by Doug pulled the bearing off with ease. Forget the pry bars, screwdrivers, dry ice, etc. Best 95 bucks I've spent. -------- Keith McKinley 700HS X26 Sebastian, FL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=408711#408711 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.