---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Mon 02/03/14: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:10 AM - Re: Bulbs (jblake207@comcast.net) 2. 09:39 AM - Re: Bulbs (Bill Geipel) 3. 04:35 PM - Re: Bulbs (Dale) 4. 04:39 PM - Re: Re: Bulbs (Bill Geipel) 5. 05:01 PM - Re: Re: Bulbs (Kelley Monroe) 6. 08:08 PM - Re: Re: Bulbs (Walter Lannon) 7. 09:12 PM - Re-financing (Thomas McKeon) 8. 09:29 PM - Re: Re-financing (Ted Waltman) 9. 09:52 PM - Re: Re-financing (DaBear) ________________________________ Message 1 _____________________________________ Time: 08:10:31 AM PST US From: jblake207@comcast.net Subject: Re: Yak-List: Bulbs I switched all my bulbs (except the landing light) to LED several years bac k.=C2- Got tired of the standard bulbs blowing after just hours of use. =C2- Haven't had to replace any of the LED bulbs so far.=C2- You can g et them from: Super Bright LEDs, Inc. 4400 Earth City Expressway St. Louis, Missouri =C2-63045-1328 tel: 866-590-3533 (toll free) fax: 314-972-6202 Jon Blake jblake207@comcast.net ----- Original Message ----- From: "Kelley Monroe" Sent: Sunday, February 2, 2014 4:14:36 PM Subject: Yak-List: Bulbs I am in need of the U.S. bulb number for the tail light on a CJ. ================= == ________________________________ Message 2 _____________________________________ Time: 09:39:32 AM PST US Subject: Re: Yak-List: Bulbs From: Bill Geipel Are there ID's on the LEDs? On Feb 3, 2014, at 9:08, jblake207@comcast.net wrote: > I switched all my bulbs (except the landing light) to LED several years ba ck. Got tired of the standard bulbs blowing after just hours of use. Haven 't had to replace any of the LED bulbs so far. You can get them from: > > > > Super Bright LEDs, Inc. > 4400 Earth City Expressway > St. Louis, Missouri 63045-1328 > > tel: 866-590-3533 (toll free) > fax: 314-972-6202 > > Jon Blake > jblake207@comcast.net > > > > From: "Kelley Monroe" > To: Yak-list@matronics.com > Sent: Sunday, February 2, 2014 4:14:36 PM > Subject: Yak-List: Bulbs > > I am in need of the U.S. bulb number for the tail light on a CJ. > Thanks Kelley Monroe > > > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 3 _____________________________________ Time: 04:35:32 PM PST US Subject: Yak-List: Re: Bulbs From: "Dale" Careful Dawg. We purchased the led's that were listed in the Red Star article. They did NOT fit in the Yak. So what ever they were your welcome to them we have plenty. Dale Read this topic online here: http://forums.matronics.com/viewtopic.php?p=418043#418043 ________________________________ Message 4 _____________________________________ Time: 04:39:54 PM PST US Subject: Re: Yak-List: Re: Bulbs From: Bill Geipel Rog. Appreciate the heads up. On Feb 3, 2014, at 17:34, "Dale" wrote: > > Careful Dawg. We purchased the led's that were listed in the Red Star article. > They did NOT fit in the Yak. So what ever they were your welcome to them we have plenty. > Dale > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=418043#418043 > > > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 05:01:15 PM PST US From: "Kelley Monroe" Subject: Re: Yak-List: Re: Bulbs I think the U.S bulb # is GE304. Thanks Kelley Monroe ----- Original Message ----- From: "Bill Geipel" Sent: Monday, February 03, 2014 6:39 PM Subject: Re: Yak-List: Re: Bulbs > > Rog. Appreciate the heads up. > > > On Feb 3, 2014, at 17:34, "Dale" wrote: > >> >> Careful Dawg. We purchased the led's that were listed in the Red Star >> article. >> They did NOT fit in the Yak. So what ever they were your welcome to them >> we have plenty. >> Dale >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=418043#418043 >> >> >> >> >> >> >> >> >> >> > > > ________________________________ Message 6 _____________________________________ Time: 08:08:17 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Re: Bulbs I don't know what was recommended in the Red Star article and I can't speak to their use in the Yak aircraft but the "SuperBright" LED's do fit fine in the CJ for cockpit indicator lighting and the tail light (and external gear down lights if you still have those). If anyone is interested I could get part numbers tomorrow. The only place I found they would not fit without some trimming of plastic is in the AN/MS series of press to test indicator lights (which I installed in my CJ). Even though their published dimensions indicate they will fit. Walt -----Original Message----- From: Dale Sent: Monday, February 03, 2014 4:34 PM Subject: Yak-List: Re: Bulbs Careful Dawg. We purchased the led's that were listed in the Red Star article. They did NOT fit in the Yak. So what ever they were your welcome to them we have plenty. Dale Read this topic online here: http://forums.matronics.com/viewtopic.php?p=418043#418043 ________________________________ Message 7 _____________________________________ Time: 09:12:22 PM PST US From: Thomas McKeon Subject: Yak-List: Re-financing I am looking to take out a loan against my CJ in order to fix it up a bit. Anyone have any suggestions? Thanks=2C Tom ________________________________ Message 8 _____________________________________ Time: 09:29:28 PM PST US Subject: Re: Yak-List: Re-financing From: Ted Waltman Dan at Milehighmoney.com finances aircraft. Look at his website/give him a call. Ted On Monday, February 3, 2014, Thomas McKeon wrote: > > I am looking to take out a loan against my CJ in order to fix it up a > bit. Anyone have any suggestions? > > Thanks, > Tom > > * > > > * > > ________________________________ Message 9 _____________________________________ Time: 09:52:15 PM PST US From: "DaBear" Subject: RE: Yak-List: Re-financing Check out: Erica Petersen, Vice President First National Bank of Clinton 107 S Second St. Clinton, MO 64735 (660)885-3365/(660)885-3212 Fax NMLS# 488208/ NMLS#433833 Bank Great people to deal with. They helped with the new M14PF. From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Thomas McKeon Sent: Tuesday, February 04, 2014 12:12 AM Subject: Yak-List: Re-financing I am looking to take out a loan against my CJ in order to fix it up a bit. Anyone have any suggestions? Thanks, Tom ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.