Today's Message Index:
----------------------
1. 05:26 AM - Re: M-14P can not reach max rpm (LinJun)
2. 06:28 AM - Re: Re: M-14P can not reach max rpm (A. Dennis Savarese)
3. 05:30 PM - Canopy (Kelley Monroe)
4. 06:35 PM - Re: Canopy (Walter Lannon)
5. 06:45 PM - Re: Canopy (Byron Fox)
6. 07:11 PM - Re: Canopy (Tom Elliott)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: M-14P can not reach max rpm |
Thank you Dennis,
I did not changed propeller angles, and have removed the limit stop, but the problem
was still there. I also wonder if the governor got problem,but I have no
backup governor.
Jun
dsavarese0812(at)bellsout wrote:
> Assuming the blade angles have not been changed and no one has tried
to adjust the position of the arm (other than maybe the high pitch stop)
it sounds like your prop governor may be the problem.
>
> If you replace the prop governor, the proper adjustment
procedure is in the M14P maintenance manual. I've attached it for
your convenience.
> Dennis
>
> > A. Dennis Savarese
> > 334-285-6263
> > 334-546-8182 (mobile)
> > www.yak-52.com (http://www.yak-52.com)
> > Skype - Yakguy1
> On 3/14/2014 5:41 AM, LinJun wrote:
>
>
> >
> > >
> > > My M-14P can not reach 2950rpm for 2 month, sometime the high rotate speed
was around 2840rpm, sometime around 2600rpm. Are there anybody ever had this
problem? Or know how to fix this problem? Thank you.
> > > BTW, the governor o-ring has problem, sometime oil leaked from control axes.
> > >
> > >
> > >
> > >
> > > Read this topic online here:
> > >
> > > http://forums.matronics.com/viewtopic.php?p=420330#420330 (http://forums.matronics.com/viewtopic.php?p=420330#420330)
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=420369#420369
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: M-14P can not reach max rpm |
Yes, that is certainly possible since you said the governor on your
engine was exhibiting a leak around the shaft. I'm sure you can purchase
a governor from one of the parts suppliers. Maybe someone on the list
has a used/serviceable governor they would like to sell?
Dennis
A. Dennis Savarese
334-285-6263
334-546-8182 (mobile)
www.yak-52.com
Skype - Yakguy1
On 3/15/2014 7:25 AM, LinJun wrote:
>
> Thank you Dennis,
>
> I did not changed propeller angles, and have removed the limit stop, but the
problem was still there. I also wonder if the governor got problem,but I have
no backup governor.
>
> Jun
>
>
> dsavarese0812(at)bellsout wrote:
>> Assuming the blade angles have not been changed and no one has tried
to adjust the position of the arm (other than maybe the high pitch stop)
it sounds like your prop governor may be the problem.
>>
>> If you replace the prop governor, the proper adjustment
procedure is in the M14P maintenance manual. I've attached it
for your convenience.
>> Dennis
>>
>>> A. Dennis Savarese
>>> 334-285-6263
>>> 334-546-8182 (mobile)
>>> www.yak-52.com (http://www.yak-52.com)
>>> Skype - Yakguy1
>> On 3/14/2014 5:41 AM, LinJun wrote:
>>
>>
>>>
>>>>
>>>> My M-14P can not reach 2950rpm for 2 month, sometime the high rotate speed
was around 2840rpm, sometime around 2600rpm. Are there anybody ever had this
problem? Or know how to fix this problem? Thank you.
>>>> BTW, the governor o-ring has problem, sometime oil leaked from control axes.
>>>>
>>>>
>>>>
>>>>
>>>> Read this topic online here:
>>>>
>>>> http://forums.matronics.com/viewtopic.php?p=420330#420330 (http://forums.matronics.com/viewtopic.php?p=420330#420330)
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=420369#420369
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I have installed canopy glass in 2 CJ's. The glass came from Desser
Tire. Has anyone installed canopy glass from LP Aero Plastics?
Thanks Kelley
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi Kelley;
I have installed the LP glass - twice on CJ=99s. Very good
product.
Was not aware that Desser handled plexiglas.
Walt
From: Kelley Monroe
Sent: Saturday, March 15, 2014 5:29 PM
Subject: Yak-List: Canopy
I have installed canopy glass in 2 CJ's. The glass came from Desser
Tire. Has anyone installed canopy glass from LP Aero Plastics?
Thanks Kelley
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
We have an LP Malcomb hood on our CJ. Very pleased with it.
Blitz Fox
415-307-2405
> On Mar 15, 2014, at 6:34 PM, "Walter Lannon" <wlannon@shaw.ca> wrote:
>
> Hi Kelley;
>
> I have installed the LP glass - twice on CJ=99s. Very good produc
t.
> Was not aware that Desser handled plexiglas.
>
> Walt
>
> From: Kelley Monroe
> Sent: Saturday, March 15, 2014 5:29 PM
> To: yak-list@matronics.com
> Subject: Yak-List: Canopy
>
> I have installed canopy glass in 2 CJ's. The glass came from Desser Tire.
Has anyone installed canopy glass from LP Aero Plastics?
> Thanks Kelley
>
>
> href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.
com/Navigator?Yak-List
> href="http://forums.matronics.com">http://forums.matronics.com
> href="http://www.matronics.com/contribution">http://www.matronics.com/c
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Walt, Desser now owns Cee bailey
Tom Elliott
CJ-6A NX63727
777 Quartz Ave
PMB 7004
Sandy Valley NV
89019
Cell 541-297-5497
N13472@AOL.COM
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Walter Lannon
Sent: Saturday, March 15, 2014 6:35 PM
Subject: Re: Yak-List: Canopy
Hi Kelley;
I have installed the LP glass - twice on CJ=99s. Very good
product.
Was not aware that Desser handled plexiglas.
Walt
From: Kelley Monroe <mailto:kelmonroe@comcast.net>
Sent: Saturday, March 15, 2014 5:29 PM
Subject: Yak-List: Canopy
I have installed canopy glass in 2 CJ's. The glass came from Desser
Tire. Has anyone installed canopy glass from LP Aero Plastics?
Thanks Kelley
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics
.com/Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
No virus found in this message.
Checked by AVG - www.avg.com
03/15/14
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|