---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sat 03/15/14: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:26 AM - Re: M-14P can not reach max rpm (LinJun) 2. 06:28 AM - Re: Re: M-14P can not reach max rpm (A. Dennis Savarese) 3. 05:30 PM - Canopy (Kelley Monroe) 4. 06:35 PM - Re: Canopy (Walter Lannon) 5. 06:45 PM - Re: Canopy (Byron Fox) 6. 07:11 PM - Re: Canopy (Tom Elliott) ________________________________ Message 1 _____________________________________ Time: 05:26:18 AM PST US Subject: Yak-List: Re: M-14P can not reach max rpm From: "LinJun" Thank you Dennis, I did not changed propeller angles, and have removed the limit stop, but the problem was still there. I also wonder if the governor got problem,but I have no backup governor. Jun dsavarese0812(at)bellsout wrote: > Assuming the blade angles have not been changed and no one has tried to adjust the position of the arm (other than maybe the high pitch stop) it sounds like your prop governor may be the problem. > > If you replace the prop governor, the proper adjustment procedure is in the M14P maintenance manual. I've attached it for your convenience. > Dennis > > > A. Dennis Savarese > > 334-285-6263 > > 334-546-8182 (mobile) > > www.yak-52.com (http://www.yak-52.com) > > Skype - Yakguy1 > On 3/14/2014 5:41 AM, LinJun wrote: > > > > > > > > > > My M-14P can not reach 2950rpm for 2 month, sometime the high rotate speed was around 2840rpm, sometime around 2600rpm. Are there anybody ever had this problem? Or know how to fix this problem? Thank you. > > > BTW, the governor o-ring has problem, sometime oil leaked from control axes. > > > > > > > > > > > > > > > Read this topic online here: > > > > > > http://forums.matronics.com/viewtopic.php?p=420330#420330 (http://forums.matronics.com/viewtopic.php?p=420330#420330) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Read this topic online here: http://forums.matronics.com/viewtopic.php?p=420369#420369 ________________________________ Message 2 _____________________________________ Time: 06:28:02 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Re: M-14P can not reach max rpm Yes, that is certainly possible since you said the governor on your engine was exhibiting a leak around the shaft. I'm sure you can purchase a governor from one of the parts suppliers. Maybe someone on the list has a used/serviceable governor they would like to sell? Dennis A. Dennis Savarese 334-285-6263 334-546-8182 (mobile) www.yak-52.com Skype - Yakguy1 On 3/15/2014 7:25 AM, LinJun wrote: > > Thank you Dennis, > > I did not changed propeller angles, and have removed the limit stop, but the problem was still there. I also wonder if the governor got problem,but I have no backup governor. > > Jun > > > dsavarese0812(at)bellsout wrote: >> Assuming the blade angles have not been changed and no one has tried to adjust the position of the arm (other than maybe the high pitch stop) it sounds like your prop governor may be the problem. >> >> If you replace the prop governor, the proper adjustment procedure is in the M14P maintenance manual. I've attached it for your convenience. >> Dennis >> >>> A. Dennis Savarese >>> 334-285-6263 >>> 334-546-8182 (mobile) >>> www.yak-52.com (http://www.yak-52.com) >>> Skype - Yakguy1 >> On 3/14/2014 5:41 AM, LinJun wrote: >> >> >>> >>>> >>>> My M-14P can not reach 2950rpm for 2 month, sometime the high rotate speed was around 2840rpm, sometime around 2600rpm. Are there anybody ever had this problem? Or know how to fix this problem? Thank you. >>>> BTW, the governor o-ring has problem, sometime oil leaked from control axes. >>>> >>>> >>>> >>>> >>>> Read this topic online here: >>>> >>>> http://forums.matronics.com/viewtopic.php?p=420330#420330 (http://forums.matronics.com/viewtopic.php?p=420330#420330) >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=420369#420369 > > ________________________________ Message 3 _____________________________________ Time: 05:30:19 PM PST US From: "Kelley Monroe" Subject: Yak-List: Canopy I have installed canopy glass in 2 CJ's. The glass came from Desser Tire. Has anyone installed canopy glass from LP Aero Plastics? Thanks Kelley ________________________________ Message 4 _____________________________________ Time: 06:35:33 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Canopy Hi Kelley; I have installed the LP glass - twice on CJ=99s. Very good product. Was not aware that Desser handled plexiglas. Walt From: Kelley Monroe Sent: Saturday, March 15, 2014 5:29 PM Subject: Yak-List: Canopy I have installed canopy glass in 2 CJ's. The glass came from Desser Tire. Has anyone installed canopy glass from LP Aero Plastics? Thanks Kelley ________________________________ Message 5 _____________________________________ Time: 06:45:08 PM PST US From: Byron Fox Subject: Re: Yak-List: Canopy We have an LP Malcomb hood on our CJ. Very pleased with it. Blitz Fox 415-307-2405 > On Mar 15, 2014, at 6:34 PM, "Walter Lannon" wrote: > > Hi Kelley; > > I have installed the LP glass - twice on CJ=99s. Very good produc t. > Was not aware that Desser handled plexiglas. > > Walt > > From: Kelley Monroe > Sent: Saturday, March 15, 2014 5:29 PM > To: yak-list@matronics.com > Subject: Yak-List: Canopy > > I have installed canopy glass in 2 CJ's. The glass came from Desser Tire. Has anyone installed canopy glass from LP Aero Plastics? > Thanks Kelley > > > href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics. com/Navigator?Yak-List > href="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 6 _____________________________________ Time: 07:11:15 PM PST US From: "Tom Elliott" Subject: RE: Yak-List: Canopy Walt, Desser now owns Cee bailey Tom Elliott CJ-6A NX63727 777 Quartz Ave PMB 7004 Sandy Valley NV 89019 Cell 541-297-5497 N13472@AOL.COM From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Walter Lannon Sent: Saturday, March 15, 2014 6:35 PM Subject: Re: Yak-List: Canopy Hi Kelley; I have installed the LP glass - twice on CJ=99s. Very good product. Was not aware that Desser handled plexiglas. Walt From: Kelley Monroe Sent: Saturday, March 15, 2014 5:29 PM Subject: Yak-List: Canopy I have installed canopy glass in 2 CJ's. The glass came from Desser Tire. Has anyone installed canopy glass from LP Aero Plastics? Thanks Kelley href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics .com/Navigator?Yak-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c No virus found in this message. Checked by AVG - www.avg.com 03/15/14 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.