Today's Message Index:
----------------------
1. 06:44 AM - Re: Yak-List Digest: 11 Msgs - 03/26/14 (Skip)
2. 06:46 AM - Re: Main air valve (Dave Jester)
3. 06:50 AM - Re: Re: Yak-List Digest: 11 Msgs - 03/26/14 (A. Dennis Savarese)
4. 09:51 AM - Re: Main air valve (rmhou@yahoo.com)
5. 11:12 AM - Re: Yak-List Digest: 11 Msgs - 03/26/14 (Buddy Moman)
6. 02:38 PM - Re: Main air valve (Dee Conger)
7. 09:48 PM - Re: Coil lead Conversion (DaBear)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 11 Msgs - 03/26/14 |
Does anyone have a chart for actual propellor RPM vs Tach percentage readings for
an M-14 spinning the Russian two blade prop? My manuals all stress the conversions
are for engine rpms vice propellor revolutions...
Skip Slyfield
Sent from my iPad
On Mar 27, 2014, at 1:02 AM, Yak-List Digest Server <yak-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 14-03-26&Archive=Yak
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 14-03-26&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Wed 03/26/14: 11
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 01:27 AM - Re: Yak 18T Generator Issue (=?UTF-8?Q?Lothar_M=C3=A4tzler?=)
> 2. 12:14 PM - Engine Cradle (jblake207@comcast.net)
> 3. 12:26 PM - Re: Engine Cradle (Tom Elliott)
> 4. 12:33 PM - Re: Engine Cradle (doug sapp)
> 5. 02:19 PM - Re: Engine Cradle (jblake207@comcast.net)
> 6. 05:35 PM - Re: Engine Cradle (Elmar & Manuela)
> 7. 07:34 PM - Re: Engine Cradle (Walter Lannon)
> 8. 08:39 PM - Main air valve (Dave Jester)
> 9. 08:48 PM - Re: Main air valve (Kregg Victory)
> 10. 09:02 PM - Re: Main air valve (Dave Jester)
> 11. 09:25 PM - Re: Main air valve (Dee Conger)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 01:27:28 AM PST US
> From: =?UTF-8?Q?Lothar_M=C3=A4tzler?= <lothar.m@tzler.at>
> Subject: Re: Yak-List: Yak 18T Generator Issue
>
> Hello Antony
>
> I have all both in spare. Funktion is warrentied. See Foto. Each one
> cost Euro 200,- plus transport.
>
> Kind regards
>
> Lothar M=C3=A4tzler, Wirth 447, A-6866 Andelsbuch.
>
> P.S.: My profession is Airplane Electricien. Iff you have any problems
> please ask me.
>
>
> From: Anthony Hudacek
> Sent: Tuesday, March 25, 2014 2:17 PM
> Subject: Yak-List: Yak 18T Generator Issue
>
> Does anyone still have their old carbon pile regulator or reverse
> current relay available? I have power coming out of the generator but it
> will not charge the batteries.
>
> Thanks,
>
> Ant.
>
>
> ________________________________ Message 2 _____________________________________
>
>
> Time: 12:14:36 PM PST US
> From: jblake207@comcast.net
> Subject: Yak-List: Engine Cradle
>
> Does anyone have the engine cradle used for stabilization while the airplan
> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how
> to build the cradle please forward.=C2- Thanks.
>
> Jon Blake
> jblake207@comcast.net
>
>
> ________________________________ Message 3 _____________________________________
>
>
> Time: 12:26:02 PM PST US
> From: "Tom Elliott" <N13472@aol.com>
> Subject: RE: Yak-List: Engine Cradle
>
> Call doug sapp
>
>
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of
> jblake207@comcast.net
> Sent: Wednesday, March 26, 2014 12:14 PM
> Subject: Yak-List: Engine Cradle
>
>
> Does anyone have the engine cradle used for stabilization while the
> airplane is on jacks? Looking to purchase. If anyone has plans on how
> to build the cradle please forward. Thanks.
>
>
> Jon Blake
> jblake207@comcast.net
>
>
> 3D==============
> 3D==============
> 3D==============
> 3D
> 3D==============
> 3D==============
> 3D==============
> 3D
> 3D==============
> 3D==============
> 3D==============
> 3D
> 3D==============
> 3D==============
> 3D==============
> 3D
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> 03/26/14
>
>
> ________________________________ Message 4 _____________________________________
>
>
> Time: 12:33:55 PM PST US
> Subject: Re: Yak-List: Engine Cradle
> From: doug sapp <dougsappllc@gmail.com>
>
> All, I have stopped making the jack sets, just to hard on the old back.
>
> Doug
>
>
> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott <N13472@aol.com> wrote:
>
>> Call doug sapp
>>
>>
>> *From:* owner-yak-list-server@matronics.com [mailto:
>> owner-yak-list-server@matronics.com] *On Behalf Of *jblake207@comcast.net
>> *Sent:* Wednesday, March 26, 2014 12:14 PM
>> *To:* yak-list@matronics.com
>> *Subject:* Yak-List: Engine Cradle
>>
>>
>> Does anyone have the engine cradle used for stabilization while the
>> airplane is on jacks? Looking to purchase. If anyone has plans on how to
>> build the cradle please forward. Thanks.
>>
>>
>> Jon Blake
>> jblake207@comcast.net
>>
>>
>> *http://www.matronics.com/Navigator?Yak-List <http://www.matronics.com/Navigator?Yak-List>*
>>
>> *http://forums.matronics.com <http://forums.matronics.com>*
>>
>> *http://www.matronics.com/contribution <http://www.matronics.com/contribution>*
>>
>>
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4354 / 03/26/14
>>
>> *
>>
>>
>> *
>
>
> --
> Best,
> Doug
> After all is said and done, more is said than done."
> -- Aesop
>
> ________________________________ Message 5 _____________________________________
>
>
> Time: 02:19:12 PM PST US
> From: jblake207@comcast.net
> Subject: Re: Yak-List: Engine Cradle
>
>
> I called Doug yesterday.=C2- I think I could have one manufactured locall
> y if someone who owns one could send a few pictures. I have a set of wing j
> acks and tail stand just need the cradle that the engine sits in.
> Jon
>
> ----- Original Message -----
>
> From: "doug sapp" <dougsappllc@gmail.com>
> Sent: Wednesday, March 26, 2014 2:33:25 PM
> Subject: Re: Yak-List: Engine Cradle
>
> All, I have stopped making the jack sets, just to hard on the old back.
>
> Doug
>
>
> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott < N13472@aol.com > wrote:
>
>
> Call doug sapp
>
> =C2-
>
> =C2-
>
>
> From: owner-yak-list-server@matronics.com [mailto: owner-yak-list-server@ma
> tronics.com ] On Behalf Of jblake207@comcast.net
> Sent: Wednesday, March 26, 2014 12:14 PM
> Subject: Yak-List: Engine Cradle
>
>
> =C2-
>
>
> Does anyone have the engine cradle used for stabilization while the airplan
> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how
> to build the cradle please forward.=C2- Thanks.
>
>
> =C2-
>
>
> Jon Blake
> jblake207@comcast.net
>
>
> =C2-
> =C2-
> =C2-
> http://www.matronics.com/Navigator?Yak-List
> http://forums.matronics.com
> http://www.matronics.com/contribution
> =C2-
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4354 / 03/26/14
> et="_blank">http://www.matronics.com/Navigator?Yak-List tp://forums.matro
> nics.com _blank">http://www.matronics.com/contribution
>
>
> --
> Best,
> Doug
> After all is said and done, more is said than done."
> -- Aesop
> ===
>
>
> ________________________________ Message 6 _____________________________________
>
>
> Time: 05:35:59 PM PST US
> From: Elmar & Manuela <samira.h@shaw.ca>
> Subject: Yak-List: Re: Engine Cradle
>
>
> years ago I have taken pictures of
> all 4 CJ jacks from all sides and added
> the exact measurements in metric
> numbers.
>
> Those are 18 pictures what need to
> be scanned, resized and converted
> to either jpg or pdf.
>
> To cover my costs, I would have to
> ask $60 for the lot plus PayPal fees.
>
> If interested, please contact me off list.
>
> cheers
>
> Elmar
>
>
> ________________________________ Message 7 _____________________________________
>
>
> Time: 07:34:12 PM PST US
> From: "Walter Lannon" <wlannon@shaw.ca>
> Subject: Re: Yak-List: Engine Cradle
>
> What=99s with this =9Cold=9D shit. You are just a
> pup.
>
>> From an old shit
>
> From: doug sapp
> Sent: Wednesday, March 26, 2014 12:33 PM
> Subject: Re: Yak-List: Engine Cradle
>
> All, I have stopped making the jack sets, just to hard on the old back.
>
> Doug
>
>
> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott <N13472@aol.com> wrote:
>
> Call doug sapp
>
>
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of
> jblake207@comcast.net
> Sent: Wednesday, March 26, 2014 12:14 PM
> To: yak-list@matronics.com
> Subject: Yak-List: Engine Cradle
>
>
> Does anyone have the engine cradle used for stabilization while the
> airplane is on jacks? Looking to purchase. If anyone has plans on how
> to build the cradle please forward. Thanks.
>
>
> Jon Blake
> jblake207@comcast.net
>
>
> http://www.matronics.com/Navigator?Yak-Listhttp://forums.matronics.comhtt
> p://www.matronics.com/contribution No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4354 / 03/26/14
>
>
> et="_blank">http://www.matronics.com/Navigator?Yak-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
>
>
> --
>
> Best,
> Doug
> After all is said and done, more is said than done."
> -- Aesop
>
>
> ________________________________ Message 8 _____________________________________
>
>
> Time: 08:39:42 PM PST US
> From: Dave Jester <wdjester@cox.net>
> Subject: Yak-List: Main air valve
>
> Folks: looking for a main air valve. Anyone have an idea where one can be f
> ound? I've tried Doug and Jill.
>
> Sent from my iPad
>
> ________________________________ Message 9 _____________________________________
>
>
> Time: 08:48:44 PM PST US
> From: Kregg Victory <kregg@balancemyprop.com>
> Subject: Re: Yak-List: Main air valve
>
>
> How many do you need? I have a few.
> Kregg Victory
>
> Sent from my iPhone
>
>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>
>> Folks: looking for a main air valve. Anyone have an idea where one can be
found?
> I've tried Doug and Jill.
>>
>> Sent from my iPad
>> <image.jpeg>
>
>
> ________________________________ Message 10 ____________________________________
>
>
> Time: 09:02:38 PM PST US
> Subject: Re: Yak-List: Main air valve
> From: Dave Jester <wdjester@cox.net>
>
>
> Kregg: I'll take two if you have them to spare...contact me off list.
>
> Sent from my iPad
>
>> On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com> wrote:
>>
>> How many do you need? I have a few.
>> Kregg Victory
>>
>> Sent from my iPhone
>>
>>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>>
>>> Folks: looking for a main air valve. Anyone have an idea where one can be
> found? I've tried Doug and Jill.
>>>
>>> Sent from my iPad
>>> <image.jpeg>
>
>
> ________________________________ Message 11 ____________________________________
>
>
> Time: 09:25:16 PM PST US
> Subject: Re: Yak-List: Main air valve
> From: Dee Conger <dee@innoviveinc.com>
>
> Why would you possibly want to install those shitty russian valves? Do
> yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a
> very simple retrofit, but a huge improvement.
>
>
> On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester@cox.net> wrote:
>
>>
>> Kregg: I'll take two if you have them to spare...contact me off list.
>>
>> Sent from my iPad
>>
>>> On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com>
>> wrote:
>>>
>>> How many do you need? I have a few.
>>> Kregg Victory
>>>
>>> Sent from my iPhone
>>>
>>>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>>>
>>>> Folks: looking for a main air valve. Anyone have an idea where one
>> can be found? I've tried Doug and Jill.
>>>>
>>>> Sent from my iPad
>>>> <image.jpeg>
>
>
>
>
>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Main air valve |
Dee: Do you have photos, what type of valve, etc. for the conversion?
Sent from my iPad
> On Mar 26, 2014, at 11:24 PM, Dee Conger <dee@innoviveinc.com> wrote:
>
> Why would you possibly want to install those shitty russian valves? Do yo
urself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a very
simple retrofit, but a huge improvement.
>
>
>> On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester@cox.net> wrote:
>>
>> Kregg: I'll take two if you have them to spare...contact me off list.
>>
>> Sent from my iPad
>>
>> > On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com> w
rote:
>> >
>> > How many do you need? I have a few.
>> > Kregg Victory
>> >
>> > Sent from my iPhone
>> >
>> >> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>> >>
>> >> Folks: looking for a main air valve. Anyone have an idea where one c
an be found? I've tried Doug and Jill.
>> >>
>> >> Sent from my iPad
>> >> <image.jpeg>
>> >
>> >
>> >
>> >
>> >
>>
>>
>> ==========
>> rget="_blank">http://www.matronics.com/Navigator?Yak-List
>> ==========
>> http://forums.matronics.com
>> ==========
>> le, List Admin.
>> ="_blank">http://www.matronics.com/contribution
>> ==========
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 11 Msgs - 03/26/14 |
This chart on my web site converts % RPM to actual engine RPM.
http://yak-52.com/Power%20Settings.htm Then multiply the actual engine
RPM times .658.
Dennis
A. Dennis Savarese
334-285-6263
334-546-8182 (mobile)
www.yak-52.com
Skype - Yakguy1
On 3/27/2014 8:40 AM, Skip wrote:
>
> Does anyone have a chart for actual propellor RPM vs Tach percentage readings
for an M-14 spinning the Russian two blade prop? My manuals all stress the conversions
are for engine rpms vice propellor revolutions...
>
> Skip Slyfield
>
> Sent from my iPad
>
> On Mar 27, 2014, at 1:02 AM, Yak-List Digest Server <yak-list@matronics.com>
wrote:
>
>> *
>>
>> =================================================
>> Online Versions of Today's List Digest Archive
>> =================================================
>>
>> Today's complete Yak-List Digest can also be found in either of the
>> two Web Links listed below. The .html file includes the Digest formatted
>> in HTML for viewing with a web browser and features Hyperlinked Indexes
>> and Message Navigation. The .txt file includes the plain ASCII version
>> of the Yak-List Digest and can be viewed with a generic text editor
>> such as Notepad or with a web browser.
>>
>> HTML Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 14-03-26&Archive=Yak
>>
>> Text Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 14-03-26&Archive=Yak
>>
>>
>> ===============================================
>> EMail Version of Today's List Digest Archive
>> ===============================================
>>
>>
>> ----------------------------------------------------------
>> Yak-List Digest Archive
>> ---
>> Total Messages Posted Wed 03/26/14: 11
>> ----------------------------------------------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> 1. 01:27 AM - Re: Yak 18T Generator Issue (=?UTF-8?Q?Lothar_M=C3=A4tzler?=)
>> 2. 12:14 PM - Engine Cradle (jblake207@comcast.net)
>> 3. 12:26 PM - Re: Engine Cradle (Tom Elliott)
>> 4. 12:33 PM - Re: Engine Cradle (doug sapp)
>> 5. 02:19 PM - Re: Engine Cradle (jblake207@comcast.net)
>> 6. 05:35 PM - Re: Engine Cradle (Elmar & Manuela)
>> 7. 07:34 PM - Re: Engine Cradle (Walter Lannon)
>> 8. 08:39 PM - Main air valve (Dave Jester)
>> 9. 08:48 PM - Re: Main air valve (Kregg Victory)
>> 10. 09:02 PM - Re: Main air valve (Dave Jester)
>> 11. 09:25 PM - Re: Main air valve (Dee Conger)
>>
>>
>>
>> ________________________________ Message 1 _____________________________________
>>
>>
>> Time: 01:27:28 AM PST US
>> From: =?UTF-8?Q?Lothar_M=C3=A4tzler?= <lothar.m@tzler.at>
>> Subject: Re: Yak-List: Yak 18T Generator Issue
>>
>> Hello Antony
>>
>> I have all both in spare. Funktion is warrentied. See Foto. Each one
>> cost Euro 200,- plus transport.
>>
>> Kind regards
>>
>> Lothar M=C3=A4tzler, Wirth 447, A-6866 Andelsbuch.
>>
>> P.S.: My profession is Airplane Electricien. Iff you have any problems
>> please ask me.
>>
>>
>> From: Anthony Hudacek
>> Sent: Tuesday, March 25, 2014 2:17 PM
>> Subject: Yak-List: Yak 18T Generator Issue
>>
>> Does anyone still have their old carbon pile regulator or reverse
>> current relay available? I have power coming out of the generator but it
>> will not charge the batteries.
>>
>> Thanks,
>>
>> Ant.
>>
>>
>> ________________________________ Message 2 _____________________________________
>>
>>
>> Time: 12:14:36 PM PST US
>> From: jblake207@comcast.net
>> Subject: Yak-List: Engine Cradle
>>
>> Does anyone have the engine cradle used for stabilization while the airplan
>> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how
>> to build the cradle please forward.=C2- Thanks.
>>
>> Jon Blake
>> jblake207@comcast.net
>>
>>
>> ________________________________ Message 3 _____________________________________
>>
>>
>> Time: 12:26:02 PM PST US
>> From: "Tom Elliott" <N13472@aol.com>
>> Subject: RE: Yak-List: Engine Cradle
>>
>> Call doug sapp
>>
>>
>> From: owner-yak-list-server@matronics.com
>> [mailto:owner-yak-list-server@matronics.com] On Behalf Of
>> jblake207@comcast.net
>> Sent: Wednesday, March 26, 2014 12:14 PM
>> Subject: Yak-List: Engine Cradle
>>
>>
>> Does anyone have the engine cradle used for stabilization while the
>> airplane is on jacks? Looking to purchase. If anyone has plans on how
>> to build the cradle please forward. Thanks.
>>
>>
>> Jon Blake
>> jblake207@comcast.net
>>
>>
>> 3D==============
>> 3D==============
>> 3D==============
>> 3D
>> 3D==============
>> 3D==============
>> 3D==============
>> 3D
>> 3D==============
>> 3D==============
>> 3D==============
>> 3D
>> 3D==============
>> 3D==============
>> 3D==============
>> 3D
>>
>>
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> 03/26/14
>>
>>
>> ________________________________ Message 4 _____________________________________
>>
>>
>> Time: 12:33:55 PM PST US
>> Subject: Re: Yak-List: Engine Cradle
>> From: doug sapp <dougsappllc@gmail.com>
>>
>> All, I have stopped making the jack sets, just to hard on the old back.
>>
>> Doug
>>
>>
>> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott <N13472@aol.com> wrote:
>>
>>> Call doug sapp
>>>
>>>
>>> *From:* owner-yak-list-server@matronics.com [mailto:
>>> owner-yak-list-server@matronics.com] *On Behalf Of *jblake207@comcast.net
>>> *Sent:* Wednesday, March 26, 2014 12:14 PM
>>> *To:* yak-list@matronics.com
>>> *Subject:* Yak-List: Engine Cradle
>>>
>>>
>>> Does anyone have the engine cradle used for stabilization while the
>>> airplane is on jacks? Looking to purchase. If anyone has plans on how to
>>> build the cradle please forward. Thanks.
>>>
>>>
>>> Jon Blake
>>> jblake207@comcast.net
>>>
>>>
>>> *http://www.matronics.com/Navigator?Yak-List <http://www.matronics.com/Navigator?Yak-List>*
>>>
>>> *http://forums.matronics.com <http://forums.matronics.com>*
>>>
>>> *http://www.matronics.com/contribution <http://www.matronics.com/contribution>*
>>>
>>>
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2014.0.4354 / 03/26/14
>>>
>>> *
>>>
>>>
>>> *
>>
>> --
>> Best,
>> Doug
>> After all is said and done, more is said than done."
>> -- Aesop
>>
>> ________________________________ Message 5 _____________________________________
>>
>>
>> Time: 02:19:12 PM PST US
>> From: jblake207@comcast.net
>> Subject: Re: Yak-List: Engine Cradle
>>
>>
>> I called Doug yesterday.=C2- I think I could have one manufactured locall
>> y if someone who owns one could send a few pictures. I have a set of wing j
>> acks and tail stand just need the cradle that the engine sits in.
>> Jon
>>
>> ----- Original Message -----
>>
>> From: "doug sapp" <dougsappllc@gmail.com>
>> Sent: Wednesday, March 26, 2014 2:33:25 PM
>> Subject: Re: Yak-List: Engine Cradle
>>
>> All, I have stopped making the jack sets, just to hard on the old back.
>>
>> Doug
>>
>>
>> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott < N13472@aol.com > wrote:
>>
>>
>> Call doug sapp
>>
>> =C2-
>>
>> =C2-
>>
>>
>> From: owner-yak-list-server@matronics.com [mailto: owner-yak-list-server@ma
>> tronics.com ] On Behalf Of jblake207@comcast.net
>> Sent: Wednesday, March 26, 2014 12:14 PM
>> Subject: Yak-List: Engine Cradle
>>
>>
>> =C2-
>>
>>
>> Does anyone have the engine cradle used for stabilization while the airplan
>> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how
>> to build the cradle please forward.=C2- Thanks.
>>
>>
>> =C2-
>>
>>
>> Jon Blake
>> jblake207@comcast.net
>>
>>
>> =C2-
>> =C2-
>> =C2-
>> http://www.matronics.com/Navigator?Yak-List
>> http://forums.matronics.com
>> http://www.matronics.com/contribution
>> =C2-
>>
>>
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4354 / 03/26/14
>> et="_blank">http://www.matronics.com/Navigator?Yak-List tp://forums.matro
>> nics.com _blank">http://www.matronics.com/contribution
>>
>>
>> --
>> Best,
>> Doug
>> After all is said and done, more is said than done."
>> -- Aesop
>> ==
>>
>>
>> ________________________________ Message 6 _____________________________________
>>
>>
>> Time: 05:35:59 PM PST US
>> From: Elmar & Manuela <samira.h@shaw.ca>
>> Subject: Yak-List: Re: Engine Cradle
>>
>>
>> years ago I have taken pictures of
>> all 4 CJ jacks from all sides and added
>> the exact measurements in metric
>> numbers.
>>
>> Those are 18 pictures what need to
>> be scanned, resized and converted
>> to either jpg or pdf.
>>
>> To cover my costs, I would have to
>> ask $60 for the lot plus PayPal fees.
>>
>> If interested, please contact me off list.
>>
>> cheers
>>
>> Elmar
>>
>>
>> ________________________________ Message 7 _____________________________________
>>
>>
>> Time: 07:34:12 PM PST US
>> From: "Walter Lannon" <wlannon@shaw.ca>
>> Subject: Re: Yak-List: Engine Cradle
>>
>> What=99s with this =9Cold=9D shit. You are just a
>> pup.
>>
>>> From an old shit
>> From: doug sapp
>> Sent: Wednesday, March 26, 2014 12:33 PM
>> Subject: Re: Yak-List: Engine Cradle
>>
>> All, I have stopped making the jack sets, just to hard on the old back.
>>
>> Doug
>>
>>
>> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott <N13472@aol.com> wrote:
>>
>> Call doug sapp
>>
>>
>> From: owner-yak-list-server@matronics.com
>> [mailto:owner-yak-list-server@matronics.com] On Behalf Of
>> jblake207@comcast.net
>> Sent: Wednesday, March 26, 2014 12:14 PM
>> To: yak-list@matronics.com
>> Subject: Yak-List: Engine Cradle
>>
>>
>> Does anyone have the engine cradle used for stabilization while the
>> airplane is on jacks? Looking to purchase. If anyone has plans on how
>> to build the cradle please forward. Thanks.
>>
>>
>> Jon Blake
>> jblake207@comcast.net
>>
>>
>> http://www.matronics.com/Navigator?Yak-Listhttp://forums.matronics.comhtt
>> p://www.matronics.com/contribution No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4354 / 03/26/14
>>
>>
>> et="_blank">http://www.matronics.com/Navigator?Yak-List
>> tp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>>
>>
>> --
>>
>> Best,
>> Doug
>> After all is said and done, more is said than done."
>> -- Aesop
>>
>>
>> ________________________________ Message 8 _____________________________________
>>
>>
>> Time: 08:39:42 PM PST US
>> From: Dave Jester <wdjester@cox.net>
>> Subject: Yak-List: Main air valve
>>
>> Folks: looking for a main air valve. Anyone have an idea where one can be
f
>> ound? I've tried Doug and Jill.
>>
>> Sent from my iPad
>>
>> ________________________________ Message 9 _____________________________________
>>
>>
>> Time: 08:48:44 PM PST US
>> From: Kregg Victory <kregg@balancemyprop.com>
>> Subject: Re: Yak-List: Main air valve
>>
>>
>> How many do you need? I have a few.
>> Kregg Victory
>>
>> Sent from my iPhone
>>
>>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>>
>>> Folks: looking for a main air valve. Anyone have an idea where one can be
found?
>> I've tried Doug and Jill.
>>> Sent from my iPad
>>> <image.jpeg>
>>
>> ________________________________ Message 10 ____________________________________
>>
>>
>> Time: 09:02:38 PM PST US
>> Subject: Re: Yak-List: Main air valve
>> From: Dave Jester <wdjester@cox.net>
>>
>>
>> Kregg: I'll take two if you have them to spare...contact me off list.
>>
>> Sent from my iPad
>>
>>> On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com> wrote:
>>>
>>> How many do you need? I have a few.
>>> Kregg Victory
>>>
>>> Sent from my iPhone
>>>
>>>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>>>
>>>> Folks: looking for a main air valve. Anyone have an idea where one can be
>> found? I've tried Doug and Jill.
>>>> Sent from my iPad
>>>> <image.jpeg>
>>
>> ________________________________ Message 11 ____________________________________
>>
>>
>> Time: 09:25:16 PM PST US
>> Subject: Re: Yak-List: Main air valve
>> From: Dee Conger <dee@innoviveinc.com>
>>
>> Why would you possibly want to install those shitty russian valves? Do
>> yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a
>> very simple retrofit, but a huge improvement.
>>
>>
>> On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester@cox.net> wrote:
>>
>>> Kregg: I'll take two if you have them to spare...contact me off list.
>>>
>>> Sent from my iPad
>>>
>>>> On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com>
>>> wrote:
>>>> How many do you need? I have a few.
>>>> Kregg Victory
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>>>>
>>>>> Folks: looking for a main air valve. Anyone have an idea where one
>>> can be found? I've tried Doug and Jill.
>>>>> Sent from my iPad
>>>>> <image.jpeg>
>>
>>
>>
>>
>>
>>
>>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Main air valve |
Hi Dee, =0ACan you share the part number of the compatible Swagelok valve?
=0AThanks,=0ARobin=0A=0ASent from Yahoo Mail on Android=0A=0A
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 11 Msgs - 03/26/14 |
Sent from my iPad
On Mar 27, 2014, at 2:02 AM, Yak-List Digest Server <yak-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 14-03-26&Archive=Yak
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 14-03-26&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Wed 03/26/14: 11
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 01:27 AM - Re: Yak 18T Generator Issue (=?UTF-8?Q?Lothar_M=C3=A4tzler?=)
> 2. 12:14 PM - Engine Cradle (jblake207@comcast.net)
> 3. 12:26 PM - Re: Engine Cradle (Tom Elliott)
> 4. 12:33 PM - Re: Engine Cradle (doug sapp)
> 5. 02:19 PM - Re: Engine Cradle (jblake207@comcast.net)
> 6. 05:35 PM - Re: Engine Cradle (Elmar & Manuela)
> 7. 07:34 PM - Re: Engine Cradle (Walter Lannon)
> 8. 08:39 PM - Main air valve (Dave Jester)
> 9. 08:48 PM - Re: Main air valve (Kregg Victory)
> 10. 09:02 PM - Re: Main air valve (Dave Jester)
> 11. 09:25 PM - Re: Main air valve (Dee Conger)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 01:27:28 AM PST US
> From: =?UTF-8?Q?Lothar_M=C3=A4tzler?= <lothar.m@tzler.at>
> Subject: Re: Yak-List: Yak 18T Generator Issue
>
> Hello Antony
>
> I have all both in spare. Funktion is warrentied. See Foto. Each one
> cost Euro 200,- plus transport.
>
> Kind regards
>
> Lothar M=C3=A4tzler, Wirth 447, A-6866 Andelsbuch.
>
> P.S.: My profession is Airplane Electricien. Iff you have any problems
> please ask me.
>
>
> From: Anthony Hudacek
> Sent: Tuesday, March 25, 2014 2:17 PM
> Subject: Yak-List: Yak 18T Generator Issue
>
> Does anyone still have their old carbon pile regulator or reverse
> current relay available? I have power coming out of the generator but it
> will not charge the batteries.
>
> Thanks,
>
> Ant.
>
>
> ________________________________ Message 2 _____________________________________
>
>
> Time: 12:14:36 PM PST US
> From: jblake207@comcast.net
> Subject: Yak-List: Engine Cradle
>
> Does anyone have the engine cradle used for stabilization while the airplan
> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how
> to build the cradle please forward.=C2- Thanks.
>
> Jon Blake
> jblake207@comcast.net
>
>
> ________________________________ Message 3 _____________________________________
>
>
> Time: 12:26:02 PM PST US
> From: "Tom Elliott" <N13472@aol.com>
> Subject: RE: Yak-List: Engine Cradle
>
> Call doug sapp
>
>
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of
> jblake207@comcast.net
> Sent: Wednesday, March 26, 2014 12:14 PM
> Subject: Yak-List: Engine Cradle
>
>
> Does anyone have the engine cradle used for stabilization while the
> airplane is on jacks? Looking to purchase. If anyone has plans on how
> to build the cradle please forward. Thanks.
>
>
> Jon Blake
> jblake207@comcast.net
>
>
> 3D==============
> 3D==============
> 3D==============
> 3D
> 3D==============
> 3D==============
> 3D==============
> 3D
> 3D==============
> 3D==============
> 3D==============
> 3D
> 3D==============
> 3D==============
> 3D==============
> 3D
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> 03/26/14
>
>
> ________________________________ Message 4 _____________________________________
>
>
> Time: 12:33:55 PM PST US
> Subject: Re: Yak-List: Engine Cradle
> From: doug sapp <dougsappllc@gmail.com>
>
> All, I have stopped making the jack sets, just to hard on the old back.
>
> Doug
>
>
> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott <N13472@aol.com> wrote:
>
>> Call doug sapp
>>
>>
>> *From:* owner-yak-list-server@matronics.com [mailto:
>> owner-yak-list-server@matronics.com] *On Behalf Of *jblake207@comcast.net
>> *Sent:* Wednesday, March 26, 2014 12:14 PM
>> *To:* yak-list@matronics.com
>> *Subject:* Yak-List: Engine Cradle
>>
>>
>> Does anyone have the engine cradle used for stabilization while the
>> airplane is on jacks? Looking to purchase. If anyone has plans on how to
>> build the cradle please forward. Thanks.
>>
>>
>> Jon Blake
>> jblake207@comcast.net
>>
>>
>> *http://www.matronics.com/Navigator?Yak-List <http://www.matronics.com/Navigator?Yak-List>*
>>
>> *http://forums.matronics.com <http://forums.matronics.com>*
>>
>> *http://www.matronics.com/contribution <http://www.matronics.com/contribution>*
>>
>>
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4354 / 03/26/14
>>
>> *
>>
>>
>> *
>
>
> --
> Best,
> Doug
> After all is said and done, more is said than done."
> -- Aesop
>
> ________________________________ Message 5 _____________________________________
>
>
> Time: 02:19:12 PM PST US
> From: jblake207@comcast.net
> Subject: Re: Yak-List: Engine Cradle
>
>
> I called Doug yesterday.=C2- I think I could have one manufactured locall
> y if someone who owns one could send a few pictures. I have a set of wing j
> acks and tail stand just need the cradle that the engine sits in.
> Jon
>
> ----- Original Message -----
>
> From: "doug sapp" <dougsappllc@gmail.com>
> Sent: Wednesday, March 26, 2014 2:33:25 PM
> Subject: Re: Yak-List: Engine Cradle
>
> All, I have stopped making the jack sets, just to hard on the old back.
>
> Doug
>
>
> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott < N13472@aol.com > wrote:
>
>
> Call doug sapp
>
> =C2-
>
> =C2-
>
>
> From: owner-yak-list-server@matronics.com [mailto: owner-yak-list-server@ma
> tronics.com ] On Behalf Of jblake207@comcast.net
> Sent: Wednesday, March 26, 2014 12:14 PM
> Subject: Yak-List: Engine Cradle
>
>
> =C2-
>
>
> Does anyone have the engine cradle used for stabilization while the airplan
> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how
> to build the cradle please forward.=C2- Thanks.
>
>
> =C2-
>
>
> Jon Blake
> jblake207@comcast.net
>
>
> =C2-
> =C2-
> =C2-
> http://www.matronics.com/Navigator?Yak-List
> http://forums.matronics.com
> http://www.matronics.com/contribution
> =C2-
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4354 / 03/26/14
> et="_blank">http://www.matronics.com/Navigator?Yak-List tp://forums.matro
> nics.com _blank">http://www.matronics.com/contribution
>
>
> --
> Best,
> Doug
> After all is said and done, more is said than done."
> -- Aesop
> ===
>
>
> ________________________________ Message 6 _____________________________________
>
>
> Time: 05:35:59 PM PST US
> From: Elmar & Manuela <samira.h@shaw.ca>
> Subject: Yak-List: Re: Engine Cradle
>
>
> years ago I have taken pictures of
> all 4 CJ jacks from all sides and added
> the exact measurements in metric
> numbers.
>
> Those are 18 pictures what need to
> be scanned, resized and converted
> to either jpg or pdf.
>
> To cover my costs, I would have to
> ask $60 for the lot plus PayPal fees.
>
> If interested, please contact me off list.
>
> cheers
>
> Elmar
>
>
> ________________________________ Message 7 _____________________________________
>
>
> Time: 07:34:12 PM PST US
> From: "Walter Lannon" <wlannon@shaw.ca>
> Subject: Re: Yak-List: Engine Cradle
>
> What=99s with this =9Cold=9D shit. You are just a
> pup.
>
>> From an old shit
>
> From: doug sapp
> Sent: Wednesday, March 26, 2014 12:33 PM
> Subject: Re: Yak-List: Engine Cradle
>
> All, I have stopped making the jack sets, just to hard on the old back.
>
> Doug
>
>
> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott <N13472@aol.com> wrote:
>
> Call doug sapp
>
>
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of
> jblake207@comcast.net
> Sent: Wednesday, March 26, 2014 12:14 PM
> To: yak-list@matronics.com
> Subject: Yak-List: Engine Cradle
>
>
> Does anyone have the engine cradle used for stabilization while the
> airplane is on jacks? Looking to purchase. If anyone has plans on how
> to build the cradle please forward. Thanks.
>
>
> Jon Blake
> jblake207@comcast.net
>
>
> http://www.matronics.com/Navigator?Yak-Listhttp://forums.matronics.comhtt
> p://www.matronics.com/contribution No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4354 / 03/26/14
>
>
> et="_blank">http://www.matronics.com/Navigator?Yak-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
>
>
> --
>
> Best,
> Doug
> After all is said and done, more is said than done."
> -- Aesop
>
>
> ________________________________ Message 8 _____________________________________
>
>
> Time: 08:39:42 PM PST US
> From: Dave Jester <wdjester@cox.net>
> Subject: Yak-List: Main air valve
>
> Folks: looking for a main air valve. Anyone have an idea where one can be f
> ound? I've tried Doug and Jill.
>
> Sent from my iPad
>
> ________________________________ Message 9 _____________________________________
>
>
> Time: 08:48:44 PM PST US
> From: Kregg Victory <kregg@balancemyprop.com>
> Subject: Re: Yak-List: Main air valve
>
>
> How many do you need? I have a few.
> Kregg Victory
>
> Sent from my iPhone
>
>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>
>> Folks: looking for a main air valve. Anyone have an idea where one can be
found?
> I've tried Doug and Jill.
>>
>> Sent from my iPad
>> <image.jpeg>
>
>
> ________________________________ Message 10 ____________________________________
>
>
> Time: 09:02:38 PM PST US
> Subject: Re: Yak-List: Main air valve
> From: Dave Jester <wdjester@cox.net>
>
>
> Kregg: I'll take two if you have them to spare...contact me off list.
>
> Sent from my iPad
>
>> On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com> wrote:
>>
>> How many do you need? I have a few.
>> Kregg Victory
>>
>> Sent from my iPhone
>>
>>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>>
>>> Folks: looking for a main air valve. Anyone have an idea where one can be
> found? I've tried Doug and Jill.
>>>
>>> Sent from my iPad
>>> <image.jpeg>
>
>
> ________________________________ Message 11 ____________________________________
>
>
> Time: 09:25:16 PM PST US
> Subject: Re: Yak-List: Main air valve
> From: Dee Conger <dee@innoviveinc.com>
>
> Why would you possibly want to install those shitty russian valves? Do
> yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a
> very simple retrofit, but a huge improvement.
>
>
> On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester@cox.net> wrote:
>
>>
>> Kregg: I'll take two if you have them to spare...contact me off list.
>>
>> Sent from my iPad
>>
>>> On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com>
>> wrote:
>>>
>>> How many do you need? I have a few.
>>> Kregg Victory
>>>
>>> Sent from my iPhone
>>>
>>>> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>>>>
>>>> Folks: looking for a main air valve. Anyone have an idea where one
>> can be found? I've tried Doug and Jill.
>>>>
>>>> Sent from my iPad
>>>> <image.jpeg>
>
>
>
>
>
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Main air valve |
Hi - don't have that handy, but I used 1/4" valves in all my Yaks - the
lines in the yak are 6mm, so easiest way to adapt is to buy swagelok 6mm to
1/4" union adapters, and then splice in a short run of 1/4" tubing. I use
these valves on the main and also emergency valves - WAY better than the
russian valves and never leak.
On Thu, Mar 27, 2014 at 9:50 AM, rmhou@yahoo.com <rmhou@yahoo.com> wrote:
> Hi Dee,
> Can you share the part number of the compatible Swagelok valve?
> Thanks,
> Robin
>
> Sent from Yahoo Mail on Android<https://overview.mail.yahoo.com/mobile/?.src=Android>
>
> ------------------------------
> * From: * Dee Conger <dee@innoviveinc.com>;
> * To: * yak-list <yak-list@matronics.com>;
> * Subject: * Re: Yak-List: Main air valve
> * Sent: * Thu, Mar 27, 2014 4:24:54 AM
>
> Why would you possibly want to install those shitty russian valves? Do
> yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a
> very simple retrofit, but a huge improvement.
>
>
> On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester@cox.net> wrote:
>
>>
>> Kregg: I'll take two if you have them to spare...contact me off list.
>>
>> Sent from my iPad
>>
>> > On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg@balancemyprop.com>
>> wrote:
>> >
>> > How many do you need? I have a few.
>> > Kregg Victory
>> >
>> > Sent from my iPhone
>> >
>> >> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester@cox.net> wrote:
>> >>
>> >> Folks: looking for a main air valve. Anyone have an idea where one
>> can be found? I've tried Doug and Jill.
>> >>
>> >> Sent from my iPad
>> >> <image.jpeg>
>> >
>> >
>> >
>> >
>> >
>>
>>
>> ==========
>> rget="_blank">http://www.matronics.com/Navigator?Yak-List
>> ==========
>> http://forums.matronics.com
>> ==========
>> le, List Admin.
>> ="_blank">http://www.matronics.com/contribution
>> ==========
>>
>>
>>
>>
> *http://www <http://www>=====================
>
> *
>
> *
>
>
> *
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Coil lead Conversion |
test
-----Original Message-----
From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Cpayne
Sent: Saturday, March 22, 2014 7:19 PM
Subject: Yak-List: Coil lead Conversion
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|