---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Thu 03/27/14: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:44 AM - Re: Yak-List Digest: 11 Msgs - 03/26/14 (Skip) 2. 06:46 AM - Re: Main air valve (Dave Jester) 3. 06:50 AM - Re: Re: Yak-List Digest: 11 Msgs - 03/26/14 (A. Dennis Savarese) 4. 09:51 AM - Re: Main air valve (rmhou@yahoo.com) 5. 11:12 AM - Re: Yak-List Digest: 11 Msgs - 03/26/14 (Buddy Moman) 6. 02:38 PM - Re: Main air valve (Dee Conger) 7. 09:48 PM - Re: Coil lead Conversion (DaBear) ________________________________ Message 1 _____________________________________ Time: 06:44:14 AM PST US Subject: Yak-List: Re: Yak-List Digest: 11 Msgs - 03/26/14 From: Skip Does anyone have a chart for actual propellor RPM vs Tach percentage readings for an M-14 spinning the Russian two blade prop? My manuals all stress the conversions are for engine rpms vice propellor revolutions... Skip Slyfield Sent from my iPad On Mar 27, 2014, at 1:02 AM, Yak-List Digest Server wrote: > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Yak-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Yak-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 14-03-26&Archive=Yak > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 14-03-26&Archive=Yak > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Yak-List Digest Archive > --- > Total Messages Posted Wed 03/26/14: 11 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 01:27 AM - Re: Yak 18T Generator Issue (=?UTF-8?Q?Lothar_M=C3=A4tzler?=) > 2. 12:14 PM - Engine Cradle (jblake207@comcast.net) > 3. 12:26 PM - Re: Engine Cradle (Tom Elliott) > 4. 12:33 PM - Re: Engine Cradle (doug sapp) > 5. 02:19 PM - Re: Engine Cradle (jblake207@comcast.net) > 6. 05:35 PM - Re: Engine Cradle (Elmar & Manuela) > 7. 07:34 PM - Re: Engine Cradle (Walter Lannon) > 8. 08:39 PM - Main air valve (Dave Jester) > 9. 08:48 PM - Re: Main air valve (Kregg Victory) > 10. 09:02 PM - Re: Main air valve (Dave Jester) > 11. 09:25 PM - Re: Main air valve (Dee Conger) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 01:27:28 AM PST US > From: =?UTF-8?Q?Lothar_M=C3=A4tzler?= > Subject: Re: Yak-List: Yak 18T Generator Issue > > Hello Antony > > I have all both in spare. Funktion is warrentied. See Foto. Each one > cost Euro 200,- plus transport. > > Kind regards > > Lothar M=C3=A4tzler, Wirth 447, A-6866 Andelsbuch. > > P.S.: My profession is Airplane Electricien. Iff you have any problems > please ask me. > > > From: Anthony Hudacek > Sent: Tuesday, March 25, 2014 2:17 PM > Subject: Yak-List: Yak 18T Generator Issue > > Does anyone still have their old carbon pile regulator or reverse > current relay available? I have power coming out of the generator but it > will not charge the batteries. > > Thanks, > > Ant. > > > ________________________________ Message 2 _____________________________________ > > > Time: 12:14:36 PM PST US > From: jblake207@comcast.net > Subject: Yak-List: Engine Cradle > > Does anyone have the engine cradle used for stabilization while the airplan > e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how > to build the cradle please forward.=C2- Thanks. > > Jon Blake > jblake207@comcast.net > > > ________________________________ Message 3 _____________________________________ > > > Time: 12:26:02 PM PST US > From: "Tom Elliott" > Subject: RE: Yak-List: Engine Cradle > > Call doug sapp > > > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] On Behalf Of > jblake207@comcast.net > Sent: Wednesday, March 26, 2014 12:14 PM > Subject: Yak-List: Engine Cradle > > > Does anyone have the engine cradle used for stabilization while the > airplane is on jacks? Looking to purchase. If anyone has plans on how > to build the cradle please forward. Thanks. > > > Jon Blake > jblake207@comcast.net > > > 3D============== > 3D============== > 3D============== > 3D > 3D============== > 3D============== > 3D============== > 3D > 3D============== > 3D============== > 3D============== > 3D > 3D============== > 3D============== > 3D============== > 3D > > > No virus found in this message. > Checked by AVG - www.avg.com > 03/26/14 > > > ________________________________ Message 4 _____________________________________ > > > Time: 12:33:55 PM PST US > Subject: Re: Yak-List: Engine Cradle > From: doug sapp > > All, I have stopped making the jack sets, just to hard on the old back. > > Doug > > > On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott wrote: > >> Call doug sapp >> >> >> *From:* owner-yak-list-server@matronics.com [mailto: >> owner-yak-list-server@matronics.com] *On Behalf Of *jblake207@comcast.net >> *Sent:* Wednesday, March 26, 2014 12:14 PM >> *To:* yak-list@matronics.com >> *Subject:* Yak-List: Engine Cradle >> >> >> Does anyone have the engine cradle used for stabilization while the >> airplane is on jacks? Looking to purchase. If anyone has plans on how to >> build the cradle please forward. Thanks. >> >> >> Jon Blake >> jblake207@comcast.net >> >> >> *http://www.matronics.com/Navigator?Yak-List * >> >> *http://forums.matronics.com * >> >> *http://www.matronics.com/contribution * >> >> >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2014.0.4354 / 03/26/14 >> >> * >> >> >> * > > > -- > Best, > Doug > After all is said and done, more is said than done." > -- Aesop > > ________________________________ Message 5 _____________________________________ > > > Time: 02:19:12 PM PST US > From: jblake207@comcast.net > Subject: Re: Yak-List: Engine Cradle > > > I called Doug yesterday.=C2- I think I could have one manufactured locall > y if someone who owns one could send a few pictures. I have a set of wing j > acks and tail stand just need the cradle that the engine sits in. > Jon > > ----- Original Message ----- > > From: "doug sapp" > Sent: Wednesday, March 26, 2014 2:33:25 PM > Subject: Re: Yak-List: Engine Cradle > > All, I have stopped making the jack sets, just to hard on the old back. > > Doug > > > On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott < N13472@aol.com > wrote: > > > Call doug sapp > > =C2- > > =C2- > > > From: owner-yak-list-server@matronics.com [mailto: owner-yak-list-server@ma > tronics.com ] On Behalf Of jblake207@comcast.net > Sent: Wednesday, March 26, 2014 12:14 PM > Subject: Yak-List: Engine Cradle > > > =C2- > > > Does anyone have the engine cradle used for stabilization while the airplan > e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how > to build the cradle please forward.=C2- Thanks. > > > =C2- > > > Jon Blake > jblake207@comcast.net > > > =C2- > =C2- > =C2- > http://www.matronics.com/Navigator?Yak-List > http://forums.matronics.com > http://www.matronics.com/contribution > =C2- > > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4354 / 03/26/14 > et="_blank">http://www.matronics.com/Navigator?Yak-List tp://forums.matro > nics.com _blank">http://www.matronics.com/contribution > > > -- > Best, > Doug > After all is said and done, more is said than done." > -- Aesop > === > > > ________________________________ Message 6 _____________________________________ > > > Time: 05:35:59 PM PST US > From: Elmar & Manuela > Subject: Yak-List: Re: Engine Cradle > > > years ago I have taken pictures of > all 4 CJ jacks from all sides and added > the exact measurements in metric > numbers. > > Those are 18 pictures what need to > be scanned, resized and converted > to either jpg or pdf. > > To cover my costs, I would have to > ask $60 for the lot plus PayPal fees. > > If interested, please contact me off list. > > cheers > > Elmar > > > ________________________________ Message 7 _____________________________________ > > > Time: 07:34:12 PM PST US > From: "Walter Lannon" > Subject: Re: Yak-List: Engine Cradle > > What=99s with this =9Cold=9D shit. You are just a > pup. > >> From an old shit > > From: doug sapp > Sent: Wednesday, March 26, 2014 12:33 PM > Subject: Re: Yak-List: Engine Cradle > > All, I have stopped making the jack sets, just to hard on the old back. > > Doug > > > On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott wrote: > > Call doug sapp > > > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] On Behalf Of > jblake207@comcast.net > Sent: Wednesday, March 26, 2014 12:14 PM > To: yak-list@matronics.com > Subject: Yak-List: Engine Cradle > > > Does anyone have the engine cradle used for stabilization while the > airplane is on jacks? Looking to purchase. If anyone has plans on how > to build the cradle please forward. Thanks. > > > Jon Blake > jblake207@comcast.net > > > http://www.matronics.com/Navigator?Yak-Listhttp://forums.matronics.comhtt > p://www.matronics.com/contribution No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4354 / 03/26/14 > > > et="_blank">http://www.matronics.com/Navigator?Yak-List > tp://forums.matronics.com > _blank">http://www.matronics.com/contribution > > > -- > > Best, > Doug > After all is said and done, more is said than done." > -- Aesop > > > ________________________________ Message 8 _____________________________________ > > > Time: 08:39:42 PM PST US > From: Dave Jester > Subject: Yak-List: Main air valve > > Folks: looking for a main air valve. Anyone have an idea where one can be f > ound? I've tried Doug and Jill. > > Sent from my iPad > > ________________________________ Message 9 _____________________________________ > > > Time: 08:48:44 PM PST US > From: Kregg Victory > Subject: Re: Yak-List: Main air valve > > > How many do you need? I have a few. > Kregg Victory > > Sent from my iPhone > >> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >> >> Folks: looking for a main air valve. Anyone have an idea where one can be found? > I've tried Doug and Jill. >> >> Sent from my iPad >> > > > ________________________________ Message 10 ____________________________________ > > > Time: 09:02:38 PM PST US > Subject: Re: Yak-List: Main air valve > From: Dave Jester > > > Kregg: I'll take two if you have them to spare...contact me off list. > > Sent from my iPad > >> On Mar 26, 2014, at 10:48 PM, Kregg Victory wrote: >> >> How many do you need? I have a few. >> Kregg Victory >> >> Sent from my iPhone >> >>> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >>> >>> Folks: looking for a main air valve. Anyone have an idea where one can be > found? I've tried Doug and Jill. >>> >>> Sent from my iPad >>> > > > ________________________________ Message 11 ____________________________________ > > > Time: 09:25:16 PM PST US > Subject: Re: Yak-List: Main air valve > From: Dee Conger > > Why would you possibly want to install those shitty russian valves? Do > yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a > very simple retrofit, but a huge improvement. > > > On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester wrote: > >> >> Kregg: I'll take two if you have them to spare...contact me off list. >> >> Sent from my iPad >> >>> On Mar 26, 2014, at 10:48 PM, Kregg Victory >> wrote: >>> >>> How many do you need? I have a few. >>> Kregg Victory >>> >>> Sent from my iPhone >>> >>>> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >>>> >>>> Folks: looking for a main air valve. Anyone have an idea where one >> can be found? I've tried Doug and Jill. >>>> >>>> Sent from my iPad >>>> > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 06:46:03 AM PST US Subject: Re: Yak-List: Main air valve From: Dave Jester Dee: Do you have photos, what type of valve, etc. for the conversion? Sent from my iPad > On Mar 26, 2014, at 11:24 PM, Dee Conger wrote: > > Why would you possibly want to install those shitty russian valves? Do yo urself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a very simple retrofit, but a huge improvement. > > >> On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester wrote: >> >> Kregg: I'll take two if you have them to spare...contact me off list. >> >> Sent from my iPad >> >> > On Mar 26, 2014, at 10:48 PM, Kregg Victory w rote: >> > >> > How many do you need? I have a few. >> > Kregg Victory >> > >> > Sent from my iPhone >> > >> >> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >> >> >> >> Folks: looking for a main air valve. Anyone have an idea where one c an be found? I've tried Doug and Jill. >> >> >> >> Sent from my iPad >> >> >> > >> > >> > >> > >> > >> >> >> ========== >> rget="_blank">http://www.matronics.com/Navigator?Yak-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 3 _____________________________________ Time: 06:50:07 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Re: Yak-List Digest: 11 Msgs - 03/26/14 This chart on my web site converts % RPM to actual engine RPM. http://yak-52.com/Power%20Settings.htm Then multiply the actual engine RPM times .658. Dennis A. Dennis Savarese 334-285-6263 334-546-8182 (mobile) www.yak-52.com Skype - Yakguy1 On 3/27/2014 8:40 AM, Skip wrote: > > Does anyone have a chart for actual propellor RPM vs Tach percentage readings for an M-14 spinning the Russian two blade prop? My manuals all stress the conversions are for engine rpms vice propellor revolutions... > > Skip Slyfield > > Sent from my iPad > > On Mar 27, 2014, at 1:02 AM, Yak-List Digest Server wrote: > >> * >> >> ================================================= >> Online Versions of Today's List Digest Archive >> ================================================= >> >> Today's complete Yak-List Digest can also be found in either of the >> two Web Links listed below. The .html file includes the Digest formatted >> in HTML for viewing with a web browser and features Hyperlinked Indexes >> and Message Navigation. The .txt file includes the plain ASCII version >> of the Yak-List Digest and can be viewed with a generic text editor >> such as Notepad or with a web browser. >> >> HTML Version: >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 14-03-26&Archive=Yak >> >> Text Version: >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 14-03-26&Archive=Yak >> >> >> =============================================== >> EMail Version of Today's List Digest Archive >> =============================================== >> >> >> ---------------------------------------------------------- >> Yak-List Digest Archive >> --- >> Total Messages Posted Wed 03/26/14: 11 >> ---------------------------------------------------------- >> >> >> Today's Message Index: >> ---------------------- >> >> 1. 01:27 AM - Re: Yak 18T Generator Issue (=?UTF-8?Q?Lothar_M=C3=A4tzler?=) >> 2. 12:14 PM - Engine Cradle (jblake207@comcast.net) >> 3. 12:26 PM - Re: Engine Cradle (Tom Elliott) >> 4. 12:33 PM - Re: Engine Cradle (doug sapp) >> 5. 02:19 PM - Re: Engine Cradle (jblake207@comcast.net) >> 6. 05:35 PM - Re: Engine Cradle (Elmar & Manuela) >> 7. 07:34 PM - Re: Engine Cradle (Walter Lannon) >> 8. 08:39 PM - Main air valve (Dave Jester) >> 9. 08:48 PM - Re: Main air valve (Kregg Victory) >> 10. 09:02 PM - Re: Main air valve (Dave Jester) >> 11. 09:25 PM - Re: Main air valve (Dee Conger) >> >> >> >> ________________________________ Message 1 _____________________________________ >> >> >> Time: 01:27:28 AM PST US >> From: =?UTF-8?Q?Lothar_M=C3=A4tzler?= >> Subject: Re: Yak-List: Yak 18T Generator Issue >> >> Hello Antony >> >> I have all both in spare. Funktion is warrentied. See Foto. Each one >> cost Euro 200,- plus transport. >> >> Kind regards >> >> Lothar M=C3=A4tzler, Wirth 447, A-6866 Andelsbuch. >> >> P.S.: My profession is Airplane Electricien. Iff you have any problems >> please ask me. >> >> >> From: Anthony Hudacek >> Sent: Tuesday, March 25, 2014 2:17 PM >> Subject: Yak-List: Yak 18T Generator Issue >> >> Does anyone still have their old carbon pile regulator or reverse >> current relay available? I have power coming out of the generator but it >> will not charge the batteries. >> >> Thanks, >> >> Ant. >> >> >> ________________________________ Message 2 _____________________________________ >> >> >> Time: 12:14:36 PM PST US >> From: jblake207@comcast.net >> Subject: Yak-List: Engine Cradle >> >> Does anyone have the engine cradle used for stabilization while the airplan >> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how >> to build the cradle please forward.=C2- Thanks. >> >> Jon Blake >> jblake207@comcast.net >> >> >> ________________________________ Message 3 _____________________________________ >> >> >> Time: 12:26:02 PM PST US >> From: "Tom Elliott" >> Subject: RE: Yak-List: Engine Cradle >> >> Call doug sapp >> >> >> From: owner-yak-list-server@matronics.com >> [mailto:owner-yak-list-server@matronics.com] On Behalf Of >> jblake207@comcast.net >> Sent: Wednesday, March 26, 2014 12:14 PM >> Subject: Yak-List: Engine Cradle >> >> >> Does anyone have the engine cradle used for stabilization while the >> airplane is on jacks? Looking to purchase. If anyone has plans on how >> to build the cradle please forward. Thanks. >> >> >> Jon Blake >> jblake207@comcast.net >> >> >> 3D============== >> 3D============== >> 3D============== >> 3D >> 3D============== >> 3D============== >> 3D============== >> 3D >> 3D============== >> 3D============== >> 3D============== >> 3D >> 3D============== >> 3D============== >> 3D============== >> 3D >> >> >> No virus found in this message. >> Checked by AVG - www.avg.com >> 03/26/14 >> >> >> ________________________________ Message 4 _____________________________________ >> >> >> Time: 12:33:55 PM PST US >> Subject: Re: Yak-List: Engine Cradle >> From: doug sapp >> >> All, I have stopped making the jack sets, just to hard on the old back. >> >> Doug >> >> >> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott wrote: >> >>> Call doug sapp >>> >>> >>> *From:* owner-yak-list-server@matronics.com [mailto: >>> owner-yak-list-server@matronics.com] *On Behalf Of *jblake207@comcast.net >>> *Sent:* Wednesday, March 26, 2014 12:14 PM >>> *To:* yak-list@matronics.com >>> *Subject:* Yak-List: Engine Cradle >>> >>> >>> Does anyone have the engine cradle used for stabilization while the >>> airplane is on jacks? Looking to purchase. If anyone has plans on how to >>> build the cradle please forward. Thanks. >>> >>> >>> Jon Blake >>> jblake207@comcast.net >>> >>> >>> *http://www.matronics.com/Navigator?Yak-List * >>> >>> *http://forums.matronics.com * >>> >>> *http://www.matronics.com/contribution * >>> >>> >>> No virus found in this message. >>> Checked by AVG - www.avg.com >>> Version: 2014.0.4354 / 03/26/14 >>> >>> * >>> >>> >>> * >> >> -- >> Best, >> Doug >> After all is said and done, more is said than done." >> -- Aesop >> >> ________________________________ Message 5 _____________________________________ >> >> >> Time: 02:19:12 PM PST US >> From: jblake207@comcast.net >> Subject: Re: Yak-List: Engine Cradle >> >> >> I called Doug yesterday.=C2- I think I could have one manufactured locall >> y if someone who owns one could send a few pictures. I have a set of wing j >> acks and tail stand just need the cradle that the engine sits in. >> Jon >> >> ----- Original Message ----- >> >> From: "doug sapp" >> Sent: Wednesday, March 26, 2014 2:33:25 PM >> Subject: Re: Yak-List: Engine Cradle >> >> All, I have stopped making the jack sets, just to hard on the old back. >> >> Doug >> >> >> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott < N13472@aol.com > wrote: >> >> >> Call doug sapp >> >> =C2- >> >> =C2- >> >> >> From: owner-yak-list-server@matronics.com [mailto: owner-yak-list-server@ma >> tronics.com ] On Behalf Of jblake207@comcast.net >> Sent: Wednesday, March 26, 2014 12:14 PM >> Subject: Yak-List: Engine Cradle >> >> >> =C2- >> >> >> Does anyone have the engine cradle used for stabilization while the airplan >> e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how >> to build the cradle please forward.=C2- Thanks. >> >> >> =C2- >> >> >> Jon Blake >> jblake207@comcast.net >> >> >> =C2- >> =C2- >> =C2- >> http://www.matronics.com/Navigator?Yak-List >> http://forums.matronics.com >> http://www.matronics.com/contribution >> =C2- >> >> >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2014.0.4354 / 03/26/14 >> et="_blank">http://www.matronics.com/Navigator?Yak-List tp://forums.matro >> nics.com _blank">http://www.matronics.com/contribution >> >> >> -- >> Best, >> Doug >> After all is said and done, more is said than done." >> -- Aesop >> == >> >> >> ________________________________ Message 6 _____________________________________ >> >> >> Time: 05:35:59 PM PST US >> From: Elmar & Manuela >> Subject: Yak-List: Re: Engine Cradle >> >> >> years ago I have taken pictures of >> all 4 CJ jacks from all sides and added >> the exact measurements in metric >> numbers. >> >> Those are 18 pictures what need to >> be scanned, resized and converted >> to either jpg or pdf. >> >> To cover my costs, I would have to >> ask $60 for the lot plus PayPal fees. >> >> If interested, please contact me off list. >> >> cheers >> >> Elmar >> >> >> ________________________________ Message 7 _____________________________________ >> >> >> Time: 07:34:12 PM PST US >> From: "Walter Lannon" >> Subject: Re: Yak-List: Engine Cradle >> >> What=99s with this =9Cold=9D shit. You are just a >> pup. >> >>> From an old shit >> From: doug sapp >> Sent: Wednesday, March 26, 2014 12:33 PM >> Subject: Re: Yak-List: Engine Cradle >> >> All, I have stopped making the jack sets, just to hard on the old back. >> >> Doug >> >> >> On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott wrote: >> >> Call doug sapp >> >> >> From: owner-yak-list-server@matronics.com >> [mailto:owner-yak-list-server@matronics.com] On Behalf Of >> jblake207@comcast.net >> Sent: Wednesday, March 26, 2014 12:14 PM >> To: yak-list@matronics.com >> Subject: Yak-List: Engine Cradle >> >> >> Does anyone have the engine cradle used for stabilization while the >> airplane is on jacks? Looking to purchase. If anyone has plans on how >> to build the cradle please forward. Thanks. >> >> >> Jon Blake >> jblake207@comcast.net >> >> >> http://www.matronics.com/Navigator?Yak-Listhttp://forums.matronics.comhtt >> p://www.matronics.com/contribution No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2014.0.4354 / 03/26/14 >> >> >> et="_blank">http://www.matronics.com/Navigator?Yak-List >> tp://forums.matronics.com >> _blank">http://www.matronics.com/contribution >> >> >> -- >> >> Best, >> Doug >> After all is said and done, more is said than done." >> -- Aesop >> >> >> ________________________________ Message 8 _____________________________________ >> >> >> Time: 08:39:42 PM PST US >> From: Dave Jester >> Subject: Yak-List: Main air valve >> >> Folks: looking for a main air valve. Anyone have an idea where one can be f >> ound? I've tried Doug and Jill. >> >> Sent from my iPad >> >> ________________________________ Message 9 _____________________________________ >> >> >> Time: 08:48:44 PM PST US >> From: Kregg Victory >> Subject: Re: Yak-List: Main air valve >> >> >> How many do you need? I have a few. >> Kregg Victory >> >> Sent from my iPhone >> >>> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >>> >>> Folks: looking for a main air valve. Anyone have an idea where one can be found? >> I've tried Doug and Jill. >>> Sent from my iPad >>> >> >> ________________________________ Message 10 ____________________________________ >> >> >> Time: 09:02:38 PM PST US >> Subject: Re: Yak-List: Main air valve >> From: Dave Jester >> >> >> Kregg: I'll take two if you have them to spare...contact me off list. >> >> Sent from my iPad >> >>> On Mar 26, 2014, at 10:48 PM, Kregg Victory wrote: >>> >>> How many do you need? I have a few. >>> Kregg Victory >>> >>> Sent from my iPhone >>> >>>> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >>>> >>>> Folks: looking for a main air valve. Anyone have an idea where one can be >> found? I've tried Doug and Jill. >>>> Sent from my iPad >>>> >> >> ________________________________ Message 11 ____________________________________ >> >> >> Time: 09:25:16 PM PST US >> Subject: Re: Yak-List: Main air valve >> From: Dee Conger >> >> Why would you possibly want to install those shitty russian valves? Do >> yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a >> very simple retrofit, but a huge improvement. >> >> >> On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester wrote: >> >>> Kregg: I'll take two if you have them to spare...contact me off list. >>> >>> Sent from my iPad >>> >>>> On Mar 26, 2014, at 10:48 PM, Kregg Victory >>> wrote: >>>> How many do you need? I have a few. >>>> Kregg Victory >>>> >>>> Sent from my iPhone >>>> >>>>> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >>>>> >>>>> Folks: looking for a main air valve. Anyone have an idea where one >>> can be found? I've tried Doug and Jill. >>>>> Sent from my iPad >>>>> >> >> >> >> >> >> >> > > ________________________________ Message 4 _____________________________________ Time: 09:51:25 AM PST US From: "rmhou@yahoo.com" Subject: Re: Yak-List: Main air valve Hi Dee, =0ACan you share the part number of the compatible Swagelok valve? =0AThanks,=0ARobin=0A=0ASent from Yahoo Mail on Android=0A=0A ________________________________ Message 5 _____________________________________ Time: 11:12:58 AM PST US Subject: Yak-List: Re: Yak-List Digest: 11 Msgs - 03/26/14 From: Buddy Moman Sent from my iPad On Mar 27, 2014, at 2:02 AM, Yak-List Digest Server wrote: > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Yak-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Yak-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 14-03-26&Archive=Yak > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 14-03-26&Archive=Yak > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Yak-List Digest Archive > --- > Total Messages Posted Wed 03/26/14: 11 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 01:27 AM - Re: Yak 18T Generator Issue (=?UTF-8?Q?Lothar_M=C3=A4tzler?=) > 2. 12:14 PM - Engine Cradle (jblake207@comcast.net) > 3. 12:26 PM - Re: Engine Cradle (Tom Elliott) > 4. 12:33 PM - Re: Engine Cradle (doug sapp) > 5. 02:19 PM - Re: Engine Cradle (jblake207@comcast.net) > 6. 05:35 PM - Re: Engine Cradle (Elmar & Manuela) > 7. 07:34 PM - Re: Engine Cradle (Walter Lannon) > 8. 08:39 PM - Main air valve (Dave Jester) > 9. 08:48 PM - Re: Main air valve (Kregg Victory) > 10. 09:02 PM - Re: Main air valve (Dave Jester) > 11. 09:25 PM - Re: Main air valve (Dee Conger) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 01:27:28 AM PST US > From: =?UTF-8?Q?Lothar_M=C3=A4tzler?= > Subject: Re: Yak-List: Yak 18T Generator Issue > > Hello Antony > > I have all both in spare. Funktion is warrentied. See Foto. Each one > cost Euro 200,- plus transport. > > Kind regards > > Lothar M=C3=A4tzler, Wirth 447, A-6866 Andelsbuch. > > P.S.: My profession is Airplane Electricien. Iff you have any problems > please ask me. > > > From: Anthony Hudacek > Sent: Tuesday, March 25, 2014 2:17 PM > Subject: Yak-List: Yak 18T Generator Issue > > Does anyone still have their old carbon pile regulator or reverse > current relay available? I have power coming out of the generator but it > will not charge the batteries. > > Thanks, > > Ant. > > > ________________________________ Message 2 _____________________________________ > > > Time: 12:14:36 PM PST US > From: jblake207@comcast.net > Subject: Yak-List: Engine Cradle > > Does anyone have the engine cradle used for stabilization while the airplan > e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how > to build the cradle please forward.=C2- Thanks. > > Jon Blake > jblake207@comcast.net > > > ________________________________ Message 3 _____________________________________ > > > Time: 12:26:02 PM PST US > From: "Tom Elliott" > Subject: RE: Yak-List: Engine Cradle > > Call doug sapp > > > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] On Behalf Of > jblake207@comcast.net > Sent: Wednesday, March 26, 2014 12:14 PM > Subject: Yak-List: Engine Cradle > > > Does anyone have the engine cradle used for stabilization while the > airplane is on jacks? Looking to purchase. If anyone has plans on how > to build the cradle please forward. Thanks. > > > Jon Blake > jblake207@comcast.net > > > 3D============== > 3D============== > 3D============== > 3D > 3D============== > 3D============== > 3D============== > 3D > 3D============== > 3D============== > 3D============== > 3D > 3D============== > 3D============== > 3D============== > 3D > > > No virus found in this message. > Checked by AVG - www.avg.com > 03/26/14 > > > ________________________________ Message 4 _____________________________________ > > > Time: 12:33:55 PM PST US > Subject: Re: Yak-List: Engine Cradle > From: doug sapp > > All, I have stopped making the jack sets, just to hard on the old back. > > Doug > > > On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott wrote: > >> Call doug sapp >> >> >> *From:* owner-yak-list-server@matronics.com [mailto: >> owner-yak-list-server@matronics.com] *On Behalf Of *jblake207@comcast.net >> *Sent:* Wednesday, March 26, 2014 12:14 PM >> *To:* yak-list@matronics.com >> *Subject:* Yak-List: Engine Cradle >> >> >> Does anyone have the engine cradle used for stabilization while the >> airplane is on jacks? Looking to purchase. If anyone has plans on how to >> build the cradle please forward. Thanks. >> >> >> Jon Blake >> jblake207@comcast.net >> >> >> *http://www.matronics.com/Navigator?Yak-List * >> >> *http://forums.matronics.com * >> >> *http://www.matronics.com/contribution * >> >> >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2014.0.4354 / 03/26/14 >> >> * >> >> >> * > > > -- > Best, > Doug > After all is said and done, more is said than done." > -- Aesop > > ________________________________ Message 5 _____________________________________ > > > Time: 02:19:12 PM PST US > From: jblake207@comcast.net > Subject: Re: Yak-List: Engine Cradle > > > I called Doug yesterday.=C2- I think I could have one manufactured locall > y if someone who owns one could send a few pictures. I have a set of wing j > acks and tail stand just need the cradle that the engine sits in. > Jon > > ----- Original Message ----- > > From: "doug sapp" > Sent: Wednesday, March 26, 2014 2:33:25 PM > Subject: Re: Yak-List: Engine Cradle > > All, I have stopped making the jack sets, just to hard on the old back. > > Doug > > > On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott < N13472@aol.com > wrote: > > > Call doug sapp > > =C2- > > =C2- > > > From: owner-yak-list-server@matronics.com [mailto: owner-yak-list-server@ma > tronics.com ] On Behalf Of jblake207@comcast.net > Sent: Wednesday, March 26, 2014 12:14 PM > Subject: Yak-List: Engine Cradle > > > =C2- > > > Does anyone have the engine cradle used for stabilization while the airplan > e is on jacks?=C2- Looking to purchase.=C2- If anyone has plans on how > to build the cradle please forward.=C2- Thanks. > > > =C2- > > > Jon Blake > jblake207@comcast.net > > > =C2- > =C2- > =C2- > http://www.matronics.com/Navigator?Yak-List > http://forums.matronics.com > http://www.matronics.com/contribution > =C2- > > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4354 / 03/26/14 > et="_blank">http://www.matronics.com/Navigator?Yak-List tp://forums.matro > nics.com _blank">http://www.matronics.com/contribution > > > -- > Best, > Doug > After all is said and done, more is said than done." > -- Aesop > === > > > ________________________________ Message 6 _____________________________________ > > > Time: 05:35:59 PM PST US > From: Elmar & Manuela > Subject: Yak-List: Re: Engine Cradle > > > years ago I have taken pictures of > all 4 CJ jacks from all sides and added > the exact measurements in metric > numbers. > > Those are 18 pictures what need to > be scanned, resized and converted > to either jpg or pdf. > > To cover my costs, I would have to > ask $60 for the lot plus PayPal fees. > > If interested, please contact me off list. > > cheers > > Elmar > > > ________________________________ Message 7 _____________________________________ > > > Time: 07:34:12 PM PST US > From: "Walter Lannon" > Subject: Re: Yak-List: Engine Cradle > > What=99s with this =9Cold=9D shit. You are just a > pup. > >> From an old shit > > From: doug sapp > Sent: Wednesday, March 26, 2014 12:33 PM > Subject: Re: Yak-List: Engine Cradle > > All, I have stopped making the jack sets, just to hard on the old back. > > Doug > > > On Wed, Mar 26, 2014 at 12:25 PM, Tom Elliott wrote: > > Call doug sapp > > > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] On Behalf Of > jblake207@comcast.net > Sent: Wednesday, March 26, 2014 12:14 PM > To: yak-list@matronics.com > Subject: Yak-List: Engine Cradle > > > Does anyone have the engine cradle used for stabilization while the > airplane is on jacks? Looking to purchase. If anyone has plans on how > to build the cradle please forward. Thanks. > > > Jon Blake > jblake207@comcast.net > > > http://www.matronics.com/Navigator?Yak-Listhttp://forums.matronics.comhtt > p://www.matronics.com/contribution No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4354 / 03/26/14 > > > et="_blank">http://www.matronics.com/Navigator?Yak-List > tp://forums.matronics.com > _blank">http://www.matronics.com/contribution > > > -- > > Best, > Doug > After all is said and done, more is said than done." > -- Aesop > > > ________________________________ Message 8 _____________________________________ > > > Time: 08:39:42 PM PST US > From: Dave Jester > Subject: Yak-List: Main air valve > > Folks: looking for a main air valve. Anyone have an idea where one can be f > ound? I've tried Doug and Jill. > > Sent from my iPad > > ________________________________ Message 9 _____________________________________ > > > Time: 08:48:44 PM PST US > From: Kregg Victory > Subject: Re: Yak-List: Main air valve > > > How many do you need? I have a few. > Kregg Victory > > Sent from my iPhone > >> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >> >> Folks: looking for a main air valve. Anyone have an idea where one can be found? > I've tried Doug and Jill. >> >> Sent from my iPad >> > > > ________________________________ Message 10 ____________________________________ > > > Time: 09:02:38 PM PST US > Subject: Re: Yak-List: Main air valve > From: Dave Jester > > > Kregg: I'll take two if you have them to spare...contact me off list. > > Sent from my iPad > >> On Mar 26, 2014, at 10:48 PM, Kregg Victory wrote: >> >> How many do you need? I have a few. >> Kregg Victory >> >> Sent from my iPhone >> >>> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >>> >>> Folks: looking for a main air valve. Anyone have an idea where one can be > found? I've tried Doug and Jill. >>> >>> Sent from my iPad >>> > > > ________________________________ Message 11 ____________________________________ > > > Time: 09:25:16 PM PST US > Subject: Re: Yak-List: Main air valve > From: Dee Conger > > Why would you possibly want to install those shitty russian valves? Do > yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a > very simple retrofit, but a huge improvement. > > > On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester wrote: > >> >> Kregg: I'll take two if you have them to spare...contact me off list. >> >> Sent from my iPad >> >>> On Mar 26, 2014, at 10:48 PM, Kregg Victory >> wrote: >>> >>> How many do you need? I have a few. >>> Kregg Victory >>> >>> Sent from my iPhone >>> >>>> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >>>> >>>> Folks: looking for a main air valve. Anyone have an idea where one >> can be found? I've tried Doug and Jill. >>>> >>>> Sent from my iPad >>>> > > > > > > > > ________________________________ Message 6 _____________________________________ Time: 02:38:18 PM PST US Subject: Re: Yak-List: Main air valve From: Dee Conger Hi - don't have that handy, but I used 1/4" valves in all my Yaks - the lines in the yak are 6mm, so easiest way to adapt is to buy swagelok 6mm to 1/4" union adapters, and then splice in a short run of 1/4" tubing. I use these valves on the main and also emergency valves - WAY better than the russian valves and never leak. On Thu, Mar 27, 2014 at 9:50 AM, rmhou@yahoo.com wrote: > Hi Dee, > Can you share the part number of the compatible Swagelok valve? > Thanks, > Robin > > Sent from Yahoo Mail on Android > > ------------------------------ > * From: * Dee Conger ; > * To: * yak-list ; > * Subject: * Re: Yak-List: Main air valve > * Sent: * Thu, Mar 27, 2014 4:24:54 AM > > Why would you possibly want to install those shitty russian valves? Do > yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a > very simple retrofit, but a huge improvement. > > > On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester wrote: > >> >> Kregg: I'll take two if you have them to spare...contact me off list. >> >> Sent from my iPad >> >> > On Mar 26, 2014, at 10:48 PM, Kregg Victory >> wrote: >> > >> > How many do you need? I have a few. >> > Kregg Victory >> > >> > Sent from my iPhone >> > >> >> On Mar 26, 2014, at 8:38 PM, Dave Jester wrote: >> >> >> >> Folks: looking for a main air valve. Anyone have an idea where one >> can be found? I've tried Doug and Jill. >> >> >> >> Sent from my iPad >> >> >> > >> > >> > >> > >> > >> >> >> ========== >> rget="_blank">http://www.matronics.com/Navigator?Yak-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== >> >> >> >> > *http://www ===================== > > * > > * > > > * > > ________________________________ Message 7 _____________________________________ Time: 09:48:18 PM PST US From: "DaBear" Subject: RE: Yak-List: Coil lead Conversion test -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Cpayne Sent: Saturday, March 22, 2014 7:19 PM Subject: Yak-List: Coil lead Conversion ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.