----------------------------------------------------------
                           Yak-List Digest Archive
                                      ---
                     Total Messages Posted Sun 06/15/14: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:08 AM - Re: Broken louvre ring support rid  (A. Dennis Savarese)
     2. 06:13 AM - Re: Broken louvre ring support rid  (Dave Jester)
     3. 06:24 AM - Re: Broken louvre ring support rid  (A. Dennis Savarese)
     4. 07:52 AM - Re: Broken louvre ring support rid  (Roger Kemp)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:08:51 AM PST US
From: "A. Dennis Savarese" <dsavarese0812@bellsouth.net>
Subject: Re: Yak-List: Broken louvre ring support rid

Unless I am mistaken, the CJ rods are the same as the ones on the Yak 50, b
ut not exactly the same as the 52's.- The difference is the 52's rods hav
e a slotted, countersunk end at the louver ring outside end (which makes th
em fit flush to the ring) and the CJ's are simply a flattened rod.- =0A
=0ADave Jester, take a look at the end of the rods around the outside of th
e ring on your 52 and then go look at the rods on your neighbor's CJ's ring
.=0ADennis- =0A=0A=0A=0A=0A=0A________________________________=0A From: R
oger Kemp <f16viperdoc@me.com>=0ATo: "yak-list@matronics.com" <yak-list@mat
ronics.com> =0ASent: Saturday, June 14, 2014 11:02 PM=0ASubject: Re: Yak-Li
 Roger Kemp <f16viperdoc@me.com>=0A=0AThe CJ rods fit the YAK. Call doug Sa
pp.=0ADoc=0A=0ASent from my iPad=0A=0A> On Jun 14, 2014, at 7:22 PM, Dave J
ve Jester <wdjester@cox.net>=0A> =0A> Make that cowling not calendar...gott
a love auto correct.=0A> =0A> Sent from my iPad=0A> =0A>> On Jun 14,=0A 201
4, at 7:15 PM, David Jester <wdjester@cox.net> wrote:=0A>> =0A>> All: I cam
e back from a flight and found a cooling louver ring support Rod broken. Lo
oking to see if anyone knows where I can get a replacement. Is the lower ro
d that supports the hook and wire that holds the lower calendar up when the
 cowling is open.- Pictures attached.=0A>> <image.jpeg>=0A>> =0A>> =0A>> 
<image.jpeg>=0A>> =0A>> =0A>> <pre><b><font size=3D2 color="#000000" fa
ce=3D"courier new,courier">=0A>> =0A>> =0A>> </b></font></pre>=0A> =0A> 
=========================0A
====================

________________________________  Message 2  _____________________________________


Time: 06:13:02 AM PST US
From: Dave Jester <wdjester@cox.net>
Subject: Re: Yak-List: Broken louvre ring support rid


Thanks all...Doug has replacements.   

Sent from my iPad

> On Jun 14, 2014, at 11:02 PM, Roger Kemp <f16viperdoc@me.com> wrote:
> 
> 
> The CJ rods fit the YAK. Call doug Sapp.
> Doc
> 
> Sent from my iPad
> 
>> On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester@cox.net> wrote:
>> 
>> 
>> Make that cowling not calendar...gotta love auto correct.
>> 
>> Sent from my iPad
>> 
>>> On Jun 14, 2014, at 7:15 PM, David Jester <wdjester@cox.net> wrote:
>>> 
>>> All: I came back from a flight and found a cooling louver ring support Rod
broken. Looking to see if anyone knows where I can get a replacement. Is the lower
rod that supports the hook and wire that holds the lower calendar up when
the cowling is open.  Pictures attached.
>>> <image.jpeg>
>>> 
>>> 
>>> <image.jpeg>
>>> 
>>> 
>>> <pre><b><font size=2 color="#000000" face="courier new,courier">
>>> 
>>> 
>>> </b></font></pre>
> 
> 
> 
> 


________________________________  Message 3  _____________________________________


Time: 06:24:55 AM PST US
From: "A. Dennis Savarese" <dsavarese0812@bellsouth.net>
Subject: Re: Yak-List: Broken louvre ring support rid

Oops!  I was thinking it was a LOUVER rod.  Not the adjustable ring 
brace rod.
Sorry for my misunderstanding.
Dennis

A. Dennis Savarese
334-285-6263
334-546-8182 (mobile)
www.yak-52.com
Skype - Yakguy1

On 6/15/2014 8:04 AM, A. Dennis Savarese wrote:
> Unless I am mistaken, the CJ rods are the same as the ones on the Yak 
> 50, but not exactly the same as the 52's.  The difference is the 52's 
> rods have a slotted, countersunk end at the louver ring outside end 
> (which makes them fit flush to the ring) and the CJ's are simply a 
> flattened rod.
>
> Dave Jester, take a look at the end of the rods around the outside of 
> the ring on your 52 and then go look at the rods on your neighbor's 
> CJ's ring.
> Dennis
>
>
> ------------------------------------------------------------------------
> *From:* Roger Kemp <f16viperdoc@me.com>
> *To:* "yak-list@matronics.com" <yak-list@matronics.com>
> *Sent:* Saturday, June 14, 2014 11:02 PM
> *Subject:* Re: Yak-List: Broken louvre ring support rid
>
> <mailto:f16viperdoc@me.com>>
>
> The CJ rods fit the YAK. Call doug Sapp.
> Doc
>
> Sent from my iPad
>
> > On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester@cox.net 
> <mailto:wdjester@cox.net>> wrote:
> >
> <mailto:wdjester@cox.net>>
> >
> > Make that cowling not calendar...gotta love auto correct.
> >
> > Sent from my iPad
> >
> >> On Jun 14, 2014, at 7:15 PM, David Jester <wdjester@cox.net 
> <mailto:wdjester@cox.net>> wrote:
> >>
> >> All: I came back from a flight and found a cooling louver ring 
> support Rod broken. Looking to see if anyone knows where I can get a 
> replacement. Is the lower rod that supports the hook and wire that 
> holds the lower calendar up when the cowling is open.  Pictures attached.
> >> <image.jpeg>
> >>
> >>
> >> <image.jpeg>
> >>
> >>
> >> <pre><b><font size=2 color="#000000" face="courier new,courier">
> >>
> >>
> >> </b></font></pre>
> >
> >
> >
> >
> > http://www.matronics.com/Navigator?Yak-List
>
>
> *
>
>
> *


________________________________  Message 4  _____________________________________


Time: 07:52:41 AM PST US
Subject: Re: Yak-List: Broken louvre ring support rid
From: Roger Kemp <f16viperdoc@me.com>

Correct Dennis. The YAK 50 louver axels are different and are not interchangeable
with the 52. The ring braces rods and ends are though.
Doug has them. I keep a couple of spares just incase. The straight and the 45 degree
ones.

Doc

Sent from my iPad

> On Jun 15, 2014, at 8:24 AM, "A. Dennis Savarese" <dsavarese0812@bellsouth.net>
wrote:
> 
> Oops!  I was thinking it was a LOUVER rod.  Not the adjustable ring brace rod.
> Sorry for my misunderstanding.
> Dennis
> A. Dennis Savarese
> 334-285-6263
> 334-546-8182 (mobile)
> www.yak-52.com
> Skype - Yakguy1
> On 6/15/2014 8:04 AM, A. Dennis Savarese wrote:
>> Unless I am mistaken, the CJ rods are the same as the ones on the Yak 50, but
not exactly the same as the 52's.  The difference is the 52's rods have a slotted,
countersunk end at the louver ring outside end (which makes them fit flush
to the ring) and the CJ's are simply a flattened rod.  
>> 
>> Dave Jester, take a look at the end of the rods around the outside of the ring
on your 52 and then go look at the rods on your neighbor's CJ's ring.
>> Dennis  
>> 
>> 
>> 
>> From: Roger Kemp <f16viperdoc@me.com>
>> To: "yak-list@matronics.com" <yak-list@matronics.com> 
>> Sent: Saturday, June 14, 2014 11:02 PM
>> Subject: Re: Yak-List: Broken louvre ring support rid
>> 
>> 
>> The CJ rods fit the YAK. Call doug Sapp.
>> Doc
>> 
>> Sent from my iPad
>> 
>> > On Jun 14, 2014, at 7:22 PM, Dave Jester <wdjester@cox.net> wrote:
>> > 
>> > 
>> > Make that cowling not calendar...gotta love auto correct.
>> > 
>> > Sent from my iPad
>> > 
>> >> On Jun 14, 2014, at 7:15 PM, David Jester <wdjester@cox.net> wrote:
>> >> 
>> >> All: I came back from a flight and found a cooling louver ring support Rod
broken. Looking to see if anyone knows where I can get a replacement. Is the
lower rod that supports the hook and wire that holds the lower calendar up when
the cowling is open.  Pictures attached.
>> >> <image.jpeg>
>> >> 
>> >> 
>> >> <image.jpeg>
>> >> 
>> >> 
>> >> <pre><b><font size=2 color="#000000" face="courier new,courier">
>> >> 
>> >> 
>> >> </b></font></pre>
>> > 
>> > 
>> > 
>> > 
>> > http://www.matronics.com/Navigator?Yak-List
> 
> 
> 
> 

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               yak-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Yak-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/yak-list
Browse Digests                   http://www.matronics.com/digest/yak-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.