Today's Message Index:
----------------------
1. 07:57 AM - Re: AK-50 A and T compressors (flier)
2. 12:08 PM - Re: AK-50 A and T compressors (doug sapp)
3. 02:42 PM - Re: Desser Tires (doug sapp)
4. 03:40 PM - Re: Desser Tires (billygeipel)
5. 03:59 PM - Re: Desser Tires (doug sapp)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: AK-50 A and T compressors |
Thanks Richard.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=429842#429842
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: AK-50 A and T compressors |
Compressor wisdom:
We have found that the KY2 series of Chinese compressors will interchange
with the Russian compressors if the "clock" position of the barrel is
changed (rotated). This is a very simple task which allows the sometimes
lower cost Chinese compressor to be used on most all "Yak" installations.
Doug
On Mon, Sep 1, 2014 at 11:30 PM, Richard Goode <
richard.goode@russianaeros.com> wrote:
> It is actually quite complex, and I'm the first to admit that I'm not a
> total expert, and merely asked my partners at Aerometal in Hungary.
>
>
> There are actually two versions of the AK50T, the =93 30 and the
=93 39. The =93
> 30 has a 1 mm larger cylinder, and a different bolt pattern. Also the
=93 30
> has a 1.5 mm thickness rings as opposed to 2.0 millimetre thickness of th
e
> =93 39.
>
>
> As far as I can see, all these parts are not interchangeable!
>
>
> Richard Goode Aerobatics
>
> Rhodds Farm
>
> Lyonshall
>
> Hereford
>
> HR5 3LW
>
>
> Tel: +44 (0) 1544 340120
>
> Fax: +44 (0) 1544 340129
>
> www.russianaeros.com
>
>
> *From:* owner-yak-list-server@matronics.com [mailto:
> owner-yak-list-server@matronics.com] *On Behalf Of *Peter Gardiner
> *Sent:* 01 September 2014 22:29
> *To:* Yak-List Discussions
> *Subject:* RE: Yak-List: AK-50 A and T compressors
>
>
> Does that mean the larger Cylinder, piston ring assembly still fit the
> AK-50A cases or Bolt pattern varies also and hence a no go
> I had heard the T has a higher output?
>
> *Regards Peter Gardiner*
>
> *PETER GARDINER ENT.PTY.LTD*
> *BRISBANE, QLD.*
> *Australia*
> *61 417646838*
>
>
> ------------------------------
>
> From: richard.goode@russianaeros.com
> To: yak-list@matronics.com
> Subject: Yak-List: AK-50 A and T compressors
> Date: Mon, 1 Sep 2014 10:51:32 +0100
>
> I noted that someone was asking for an explanation of the differences
> between the two compressors.
>
>
> Firstly, the standard compressor as fitted to the M 14 P is the AK-50A,
> and the differences between the two models are totally within the piston
> and piston rings, which are of different sizes, and therefore not
> interchangeable.
>
>
> Richard Goode Aerobatics
>
> Rhodds Farm
>
> Lyonshall
>
> Hereford
>
> HR5 3LW
>
>
> Tel: +44 (0) 1544 340120
>
> Fax: +44 (0) 1544 340129
>
> www.russianaeros.com
>
>
> *===========*
>
> *rget="_blank">http://www.matronics.com/Navigator?Yak-List <http://www.
matronics.com/Navigator?Yak-List>*
>
> *===========*
>
> *http://forums.matronics.com <http://forums.matronics.com>*
>
> *===========*
>
> *="_blank">http://www.matronics.com/contribution <http://www.matronics.
com/contribution>*
>
> *===========*
>
>
> *http://www.matronics.com/Navigator?Yak-List <http://www.matronics.com/Na
vigator?Yak-List>*
>
> *http://forums.matronics.com <http://forums.matronics.com>*
>
> *http://www.matronics.com/contribution <http://www.matronics.com/contribu
tion>*
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>
> *
>
===========
nics.com/Navigator?Yak-List>
===========
===========
om/contribution>
===========
>
> *
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Desser Tires |
Guys I have purchased a inventory which contains several sets of new and
recap Desser tires (in 3 tire sets.) I am offering them at 10% off
Desser's current price while they last.
Doug
On Sun, Aug 31, 2014 at 12:26 PM, Byron Fox <byronmfox@gmail.com> wrote:
> Just had a delightful experience with Desser. Back in May, I UPSed a
> couple of 500X150 mains for retreading for my CJ. Two weeks went by without
> a word from Desser. Left messages and emails, but no response. Odd. Then
> last week using Desser's message feature on its web site, I ask for help.
> Gus at Desser got right back to me. With UPS's tracking number, Gus
> confirmed that they'd received the tires but couldn't locate them.
>
> "We're very sorry about this. It's not the way we operate. We'll send you
> two new tires now for the price of retreads," Gus offered.
>
> Great product. Great folks.
>
> --
> ... Blitz
>
> Byron M. Fox
> 80 Milland Drive
> Mill Valley, CA 94941
> 415-307-2405
>
> *
>
>
> *
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Desser Tires |
How much is that?
Sent from my iPad
> On Sep 3, 2014, at 6:34, doug sapp <dougsappllc@gmail.com> wrote:
>
> Guys I have purchased a inventory which contains several sets of new and r
ecap Desser tires (in 3 tire sets.) I am offering them at 10% off Desser's c
urrent price while they last.
>
> Doug
>
>
>> On Sun, Aug 31, 2014 at 12:26 PM, Byron Fox <byronmfox@gmail.com> wrote:
>> Just had a delightful experience with Desser. Back in May, I UPSed a coup
le of 500X150 mains for retreading for my CJ. Two weeks went by without a wo
rd from Desser. Left messages and emails, but no response. Odd. Then last we
ek using Desser's message feature on its web site, I ask for help. Gus at De
sser got right back to me. With UPS's tracking number, Gus confirmed that th
ey'd received the tires but couldn't locate them.
>>
>> "We're very sorry about this. It's not the way we operate. We'll send you
two new tires now for the price of retreads," Gus offered.
>>
>> Great product. Great folks.
>>
>> --
>> ... Blitz
>>
>> Byron M. Fox
>> 80 Milland Drive
>> Mill Valley, CA 94941
>> 415-307-2405
>>
>>
>>
>> et="_blank">http://www.matronics.com/Navigator?Yak-List
>> tp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>>
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Desser Tires |
They are in 3 tire sets, 2 main and 1 nose. Desser price would be about
$195.00 each for new ($585/set) and about 160.00 each for recaps
($480.00/set). My price for new set is 525.00, recaps 425.00.
I am also still offering my 3 tubes for the price of 2 deal. Normally
$150.00 per set of 3, now $100.00 for a set of 3.
Please contact me off list if you have questions.
Doug
On Tue, Sep 2, 2014 at 3:39 PM, billygeipel <l129bs@gmail.com> wrote:
> How much is that?
>
> Sent from my iPad
>
> On Sep 3, 2014, at 6:34, doug sapp <dougsappllc@gmail.com> wrote:
>
> Guys I have purchased a inventory which contains several sets of new and
> recap Desser tires (in 3 tire sets.) I am offering them at 10% off
> Desser's current price while they last.
>
> Doug
>
>
> On Sun, Aug 31, 2014 at 12:26 PM, Byron Fox <byronmfox@gmail.com> wrote:
>
>> Just had a delightful experience with Desser. Back in May, I UPSed a
>> couple of 500X150 mains for retreading for my CJ. Two weeks went by without
>> a word from Desser. Left messages and emails, but no response. Odd. Then
>> last week using Desser's message feature on its web site, I ask for help.
>> Gus at Desser got right back to me. With UPS's tracking number, Gus
>> confirmed that they'd received the tires but couldn't locate them.
>>
>> "We're very sorry about this. It's not the way we operate. We'll send you
>> two new tires now for the price of retreads," Gus offered.
>>
>> Great product. Great folks.
>>
>> --
>> ... Blitz
>>
>> Byron M. Fox
>> 80 Milland Drive
>> Mill Valley, CA 94941
>> 415-307-2405
>>
>> *
>>
>> et="_blank">http://www.matronics.com/Navigator?Yak-List <http://www.matronics.com/Navigator?Yak-List>
>> tp://forums.matronics.com <http://forums.matronics.com>
>> _blank">http://www.matronics.com/contribution <http://www.matronics.com/contribution>
>>
>> *
>>
>>
>
>
> *
>
>
> *
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|