---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sun 09/21/14: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:31 AM - Re: Aeroquip Hose (Ernest Martinez) 2. 07:52 AM - Re: Aeroquip Hose (A. Dennis Savarese) 3. 09:36 AM - Re: Aeroquip Hose (Ernest Martinez) 4. 10:58 AM - Re: Aeroquip Hose (Bill vH) 5. 10:54 PM - Re: Aeroquip Hose (FamilyGage@aol.com) ________________________________ Message 1 _____________________________________ Time: 04:31:26 AM PST US Subject: Re: Yak-List: Aeroquip Hose From: Ernest Martinez Dennis, Do you think that a 303-3 hose would be sufficient for our air system? What I'd like to do is use hose pig tails off of things like the flap valve where it is located in tight spots. The 666 hose would have fit the bill nicely, but the nuts can't be replaced. I'm concerned that the 303 hose is a bit bulky. Thanks Ernie On Sat, Sep 20, 2014 at 10:55 PM, A. Dennis Savarese < dsavarese0812@bellsouth.net> wrote: > Use Aeroquip 303 hose with AN491-x fitting. Throw away the AN nut from > the 491-x and use the metric B-nut on the 491-x fitting. Use the > appropriate size mandril for the 491-x fitting available from Spruce if you > don't already have them. > Dennis > > > On Sep 20, 2014, at 3:26 PM, Ernest Martinez wrote: > > Has anyone been able to use the Chinese B-Nuts on Flexible hose like > Aeroquip 666? I'd like to know what mandrels, etc I would need to make this > work. > > Thanks > > Ernie > > ________________________________ Message 2 _____________________________________ Time: 07:52:53 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Aeroquip Hose I use Aeroquip 303-4 hoses and AN491-4 fittings. The metric B nut fits very nicely in place of the AN B nut on the 491-4 fitting. The 303 hose works very well. Been there, done that, got the T-shirt. Dennis ________________________________ From: Ernest Martinez Sent: Sunday, September 21, 2014 6:30 AM Subject: Re: Yak-List: Aeroquip Hose Dennis, Do you think that a 303-3 hose would be sufficient for our air system? What I'd like to do is use hose pig tails off of things like the flap valve where it is located in tight spots. The 666 hose would have fit the bill nicely, but the nuts can't be replaced. I'm concerned that the 303 hose is a bit bulky. Thanks Ernie On Sat, Sep 20, 2014 at 10:55 PM, A. Dennis Savarese wrote: Use Aeroquip 303 hose with AN491-x fitting. Throw away the AN nut from the 491-x and use the metric B-nut on the 491-x fitting. Use the appropriate size mandril for the 491-x fitting available from Spruce if you don't already have them. >Dennis > >On Sep 20, 2014, at 3:26 PM, Ernest Martinez wrote: > > >Has anyone been able to use the Chinese B-Nuts on Flexible hose like Aeroquip 666? I'd like to know what mandrels, etc I would need to make this work. >> >> >>Thanks >> >> >>Ernie ________________________________ Message 3 _____________________________________ Time: 09:36:58 AM PST US Subject: Re: Yak-List: Aeroquip Hose From: Ernest Martinez Thanks Dennis, the question was will the 303-3 hose with the AN 491-3 work? Ernie On Sun, Sep 21, 2014 at 10:52 AM, A. Dennis Savarese < dsavarese0812@bellsouth.net> wrote: > I use Aeroquip 303-4 hoses and AN491-4 fittings. The metric B nut fits > very nicely in place of the AN B nut on the 491-4 fitting. > > The 303 hose works very well. Been there, done that, got the T-shirt. > Dennis > > ------------------------------ > *From:* Ernest Martinez > *To:* yak-list > *Sent:* Sunday, September 21, 2014 6:30 AM > *Subject:* Re: Yak-List: Aeroquip Hose > > Dennis, > > Do you think that a 303-3 hose would be sufficient for our air system? > > What I'd like to do is use hose pig tails off of things like the flap > valve where it is located in tight spots. The 666 hose would have fit the > bill nicely, but the nuts can't be replaced. I'm concerned that the 303 > hose is a bit bulky. > > Thanks > > Ernie > > On Sat, Sep 20, 2014 at 10:55 PM, A. Dennis Savarese < > dsavarese0812@bellsouth.net> wrote: > > Use Aeroquip 303 hose with AN491-x fitting. Throw away the AN nut from > the 491-x and use the metric B-nut on the 491-x fitting. Use the > appropriate size mandril for the 491-x fitting available from Spruce if you > don't already have them. > Dennis > > > On Sep 20, 2014, at 3:26 PM, Ernest Martinez wrote: > > Has anyone been able to use the Chinese B-Nuts on Flexible hose like > Aeroquip 666? I'd like to know what mandrels, etc I would need to make this > work. > > Thanks > > Ernie > > > * > > > * > > ________________________________ Message 4 _____________________________________ Time: 10:58:48 AM PST US Subject: Yak-List: Re: Aeroquip Hose From: "Bill vH" Dennis, I have looked all over (including ACS) and have never found any assembly mandrels that have metric threads allowing you to thread on the metric B-nut and then thread that into the hose. I guess I don't understand why you would even buy a AN 491-X fitting if you were going to use the metric B-nut. I just made my own assembly mandrel with an appropriate size metric bolt on a lathe. What am I missing here? Bill [quote="dsavarese0812(at)bellsout"]Use Aeroquip 303 hose with AN491-x fitting. Throw away the AN nut from the 491-x and use the metric B-nut on the 491-x fitting. Use the appropriate size mandril for the 491-x fitting available from Spruce if you don't already have them. Dennis On Sep 20, 2014, at 3:26 PM, Ernest Martinez wrote: > Has anyone been able to use the Chinese B-Nuts on Flexible hose like Aeroquip 666? I'd like to know what mandrels, etc I would need to make this work. > > Thanks > > > Ernie > > > > > > > > > > > > [b] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430880#430880 ________________________________ Message 5 _____________________________________ Time: 10:54:10 PM PST US From: FamilyGage@aol.com Subject: Re: Yak-List: Aeroquip Hose ERnie: It is good to see you name on the Yak list. Many found memeries. Hope that you are doing fine. Do you still live in the Ocala fly-in? Let me hear what you have been up to. Your Old Friend, Ray Gage In a message dated 9/21/2014 7:31:46 A.M. Eastern Daylight Time, erniel29@gmail.com writes: Dennis, Do you think that a 303-3 hose would be sufficient for our air system? What I'd like to do is use hose pig tails off of things like the flap valve where it is located in tight spots. The 666 hose would have fit the bill nicely, but the nuts can't be replaced. I'm concerned that the 303 hose is a bit bulky. Thanks Ernie On Sat, Sep 20, 2014 at 10:55 PM, A. Dennis Savarese <_dsavarese0812@bellsouth.net_ (mailto:dsavarese0812@bellsouth.net) > wrote: Use Aeroquip 303 hose with AN491-x fitting. Throw away the AN nut from the 491-x and use the metric B-nut on the 491-x fitting. Use the appropriate size mandril for the 491-x fitting available from Spruce if you don't already have them. Dennis On Sep 20, 2014, at 3:26 PM, Ernest Martinez <_erniel29@gmail.com_ (mailto:erniel29@gmail.com) > wrote: Has anyone been able to use the Chinese B-Nuts on Flexible hose like Aeroquip 666? I'd like to know what mandrels, etc I would need to make this work. Thanks Ernie ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.