Today's Message Index:
----------------------
1. 03:12 AM - Re: HS6/Chang Triplex Gauge (Harv)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: HS6/Chang Triplex Gauge |
Again thanks for support.
I do have the complete set of maintenance manual from Doug but cant lay my hands
on them right now.
Would someone be willing to scan the electrical system wiring diagram and post
it on here? I have a copy of this too but its not readable due scan quality.
I do know the transducers are items designated 4Y & 10Y respectively and these
seem to carry the following wire designations:
Pin 1 = wire is tagged as 4Y1
Pin 2 = wire tagged at 4Y2
Pin 3 = wire seems to be tagged 3YZ? (Earth, grounding wire?)
The other transducer carries similar wire designations led with 10 as opposed to
4.
Pin 1 = 10Y1
Pin 2 = 10Y2
Pin 3 = 9YZ? (Earth, grounding wire?)
What I would like to establish is where the earth (grounds) are terminated on the
airframe. This entire problem could be a corroded earth which id like to rule
out next.
Rgs
Harv
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=447331#447331
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|