Today's Message Index:
----------------------
1. 01:30 AM - Re: Help please (James Bancroft)
2. 09:59 AM - Re: Cyl. Head Temperature Delta (PaulW)
3. 11:24 AM - Re: Yak 55M vs Yak 55 (dcrogers11)
4. 11:39 AM - Re: Re: Cyl. Head Temperature Delta (Larry Pine)
5. 11:40 AM - Re: Re: Cyl. Head Temperature Delta (Larry Pine)
6. 03:12 PM - Re: Re: Cyl. Head Temperature Delta (A. Dennis Savarese)
7. 04:52 PM - Re: Yak 55M vs Yak 55 (rmross)
8. 05:38 PM - Re: Re: Cyl. Head Temperature Delta (Walter Lannon)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Good morning
Thanks for posting my thread about breaking action on the yak list. Unfortunately
I cannot respond to any of the comments due to the problem I outlined below......
Please help!
Thanks
James.
> On 24 Oct 2015, at 08:58, James Bancroft <jamesbancroft@btinternet.com> wrote:
>
> Hi
>
> I can't remember my username!
>
> Sorry!
>
> I've tried my email address and that doesn't work, also been through old emails
to try and find one that addresses me by my username but can't find that either.
I can't get check my password without my username either. I'm pretty sure
I know what the password is but without my username it seems I can't get in.....please
help as I'd like to make a post.
>
> Cheers
>
> James.
>
>
>
>> On 3 Feb 2015, at 22:02, Matronics List Administrator <list-admin@mail.matronics.com>
wrote:
>>
>>
>> Dear Jamesbancroft@btinternet.com,
>>
>> The Matronics Email List Administrator has received a request indicating that you would like your email address (Jamesbancroft@btinternet.com) added or removed from one or more Email List Forums at Matronics ( http://www.matronics.com/emaillists ).
>>
>> If you initiated this request, please click on the Web Link below to complete
the subscription process. For each respective Subscribe request, you will receive
a confirmation email that will include the Email List FAQ indicating the
process was successful. You will not receive a confirmation email for Unsubscribe
requests.
>>
>> Click Here To Confirm (Requests Detailed Below):
>>
>> http://www.matronics.com/subscription/index.php?Frame=center&Functions=Confirm&Service=Confirm&ConfirmID=142300093082759022
>>
>> If you did not initiate this subscription request, do nothing. The request
will be ignored.
>>
>> Thank you,
>>
>> Matronics Email List Administrator
>>
>>
>> Request Detail
>> --------------
>>
>> Subscribe: yak-list-digest Jamesbancroft@btinternet.com (host217-43-118-148.range217-43.btcentralplus.com
- 217.43.118.148 - 02/03/15 02:02:10 PM)
>>
>>
>>
>>
>>
>>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cyl. Head Temperature Delta |
Hi
I have been looking and Googling, but cannot find the info I need. I am sure someone
here will know.
1. Where is the CHT sensor fitted? I read somewhere at the hottest and coldest
cylinder. So there are two? Also read it is close to the rear sparkplug?
2. Which cylinder is which? How do you count if you are in front or rear? I know
1 is at the top, but which one exactly and which direction do you start counting?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448330#448330
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak 55M vs Yak 55 |
If the advertised roll rate is 345 degrees/sec on the M, what would be a good number
for roll rate on the straight 55? And what were the few minor differences
mentioned besides the wing?
Thanks,
Don
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448332#448332
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cyl. Head Temperature Delta |
=0AI believe most radials have it installed on the number four or which eve
r is the master rod.=0A=0ALarry=0A=0ASent from Yahoo Mail on Android=0A=0AF
rom:"PaulW" <paul@budcyber.com>=0ADate:Wed, Oct 28, 2015 at 10:17=0ASubject
:Yak-List: Re: Cyl. Head Temperature Delta=0A=0A--> Yak-List message posted
by: "PaulW" <paul@budcyber.com>=0A=0AHi=0A=0AI have been looking and Googl
ing, but cannot find the info I need. I am sure someone here will know.=0A
=0A1. Where is the CHT sensor fitted? I read somewhere at the hottest and c
oldest cylinder. So there are two? Also read it is close to the rear sparkp
lug?=0A=0A2. Which cylinder is which? How do you count if you are in front
or rear? I know 1 is at the top, but which one exactly and which direction
do you start counting?=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp
://forums.matronics.com/viewtopic.php?p=448330#448330=0A=0A=0A=0A=0A=0A
==============0A=0A=0A=0A
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cyl. Head Temperature Delta |
=0AI believe most radials have it installed on the number four or which eve
r is the master rod.=0A=0ALarry=0A=0ASent from Yahoo Mail on Android=0A=0AF
rom:"PaulW" <paul@budcyber.com>=0ADate:Wed, Oct 28, 2015 at 10:17=0ASubject
:Yak-List: Re: Cyl. Head Temperature Delta=0A=0A--> Yak-List message posted
by: "PaulW" <paul@budcyber.com>=0A=0AHi=0A=0AI have been looking and Googl
ing, but cannot find the info I need. I am sure someone here will know.=0A
=0A1. Where is the CHT sensor fitted? I read somewhere at the hottest and c
oldest cylinder. So there are two? Also read it is close to the rear sparkp
lug?=0A=0A2. Which cylinder is which? How do you count if you are in front
or rear? I know 1 is at the top, but which one exactly and which direction
do you start counting?=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp
://forums.matronics.com/viewtopic.php?p=448330#448330=0A=0A=0A=0A=0A=0A
==============0A=0A=0A=0A
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cyl. Head Temperature Delta |
CHT probes are under the rear spark plugs.=C2- On the Yak 52, both are un
der #4. (Some people split them between 3 and 4). =C2- On the CJ they are
typically split between two rear plugs.=C2- #4 and #3 or possibly #2.
=C2- They are easy to see.=C2- Look for a wrapped wire bundle going to
the rear plugs.
Looking at the front of the engine, Cylinder number 1 is at the very top.
=C2- looking at the front of the engine, count clockwise 1,2,3,4,5 then t
he sum, 6,7,8,9.Dennis=C2-
From: PaulW <paul@budcyber.com>
To: yak-list@matronics.com
Sent: Wednesday, October 28, 2015 12:55 PM
Subject: Yak-List: Re: Cyl. Head Temperature Delta
Hi
I have been looking and Googling, but cannot find the info I need. I am sur
e someone here will know.
1. Where is the CHT sensor fitted? I read somewhere at the hottest and cold
est cylinder. So there are two? Also read it is close to the rear sparkplug
?
2. Which cylinder is which? How do you count if you are in front or rear? I
know 1 is at the top, but which one exactly and which direction do you sta
rt counting?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448330#448330
S -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak 55M vs Yak 55 |
I have seen an on-line reference which states that the 55 has a roll rate of 4
rad/sec, which is about 230 deg/sec.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448338#448338
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cyl. Head Temperature Delta |
Cj6, Yk50, 52, Or??
-----Original Message-----
From: PaulW
Sent: Wednesday, October 28, 2015 9:55 AM
Subject: Yak-List: Re: Cyl. Head Temperature Delta
Hi
I have been looking and Googling, but cannot find the info I need. I am sure
someone here will know.
1. Where is the CHT sensor fitted? I read somewhere at the hottest and
coldest cylinder. So there are two? Also read it is close to the rear
sparkplug?
2. Which cylinder is which? How do you count if you are in front or rear? I
know 1 is at the top, but which one exactly and which direction do you start
counting?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448330#448330
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|