---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Wed 10/28/15: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:30 AM - Re: Help please (James Bancroft) 2. 09:59 AM - Re: Cyl. Head Temperature Delta (PaulW) 3. 11:24 AM - Re: Yak 55M vs Yak 55 (dcrogers11) 4. 11:39 AM - Re: Re: Cyl. Head Temperature Delta (Larry Pine) 5. 11:40 AM - Re: Re: Cyl. Head Temperature Delta (Larry Pine) 6. 03:12 PM - Re: Re: Cyl. Head Temperature Delta (A. Dennis Savarese) 7. 04:52 PM - Re: Yak 55M vs Yak 55 (rmross) 8. 05:38 PM - Re: Re: Cyl. Head Temperature Delta (Walter Lannon) ________________________________ Message 1 _____________________________________ Time: 01:30:00 AM PST US Subject: Yak-List: Re: Help please From: James Bancroft Good morning Thanks for posting my thread about breaking action on the yak list. Unfortunately I cannot respond to any of the comments due to the problem I outlined below...... Please help! Thanks James. > On 24 Oct 2015, at 08:58, James Bancroft wrote: > > Hi > > I can't remember my username! > > Sorry! > > I've tried my email address and that doesn't work, also been through old emails to try and find one that addresses me by my username but can't find that either. I can't get check my password without my username either. I'm pretty sure I know what the password is but without my username it seems I can't get in.....please help as I'd like to make a post. > > Cheers > > James. > > > >> On 3 Feb 2015, at 22:02, Matronics List Administrator wrote: >> >> >> Dear Jamesbancroft@btinternet.com, >> >> The Matronics Email List Administrator has received a request indicating that you would like your email address (Jamesbancroft@btinternet.com) added or removed from one or more Email List Forums at Matronics ( http://www.matronics.com/emaillists ). >> >> If you initiated this request, please click on the Web Link below to complete the subscription process. For each respective Subscribe request, you will receive a confirmation email that will include the Email List FAQ indicating the process was successful. You will not receive a confirmation email for Unsubscribe requests. >> >> Click Here To Confirm (Requests Detailed Below): >> >> http://www.matronics.com/subscription/index.php?Frame=center&Functions=Confirm&Service=Confirm&ConfirmID=142300093082759022 >> >> If you did not initiate this subscription request, do nothing. The request will be ignored. >> >> Thank you, >> >> Matronics Email List Administrator >> >> >> Request Detail >> -------------- >> >> Subscribe: yak-list-digest Jamesbancroft@btinternet.com (host217-43-118-148.range217-43.btcentralplus.com - 217.43.118.148 - 02/03/15 02:02:10 PM) >> >> >> >> >> >> ________________________________ Message 2 _____________________________________ Time: 09:59:27 AM PST US Subject: Yak-List: Re: Cyl. Head Temperature Delta From: "PaulW" Hi I have been looking and Googling, but cannot find the info I need. I am sure someone here will know. 1. Where is the CHT sensor fitted? I read somewhere at the hottest and coldest cylinder. So there are two? Also read it is close to the rear sparkplug? 2. Which cylinder is which? How do you count if you are in front or rear? I know 1 is at the top, but which one exactly and which direction do you start counting? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=448330#448330 ________________________________ Message 3 _____________________________________ Time: 11:24:59 AM PST US Subject: Yak-List: Re: Yak 55M vs Yak 55 From: "dcrogers11" If the advertised roll rate is 345 degrees/sec on the M, what would be a good number for roll rate on the straight 55? And what were the few minor differences mentioned besides the wing? Thanks, Don Read this topic online here: http://forums.matronics.com/viewtopic.php?p=448332#448332 ________________________________ Message 4 _____________________________________ Time: 11:39:59 AM PST US From: Larry Pine Subject: Re: Yak-List: Re: Cyl. Head Temperature Delta =0AI believe most radials have it installed on the number four or which eve r is the master rod.=0A=0ALarry=0A=0ASent from Yahoo Mail on Android=0A=0AF rom:"PaulW" =0ADate:Wed, Oct 28, 2015 at 10:17=0ASubject :Yak-List: Re: Cyl. Head Temperature Delta=0A=0A--> Yak-List message posted by: "PaulW" =0A=0AHi=0A=0AI have been looking and Googl ing, but cannot find the info I need. I am sure someone here will know.=0A =0A1. Where is the CHT sensor fitted? I read somewhere at the hottest and c oldest cylinder. So there are two? Also read it is close to the rear sparkp lug?=0A=0A2. Which cylinder is which? How do you count if you are in front or rear? I know 1 is at the top, but which one exactly and which direction do you start counting?=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp ://forums.matronics.com/viewtopic.php?p=448330#448330=0A=0A=0A=0A=0A=0A ==============0A=0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 11:40:08 AM PST US From: Larry Pine Subject: Re: Yak-List: Re: Cyl. Head Temperature Delta =0AI believe most radials have it installed on the number four or which eve r is the master rod.=0A=0ALarry=0A=0ASent from Yahoo Mail on Android=0A=0AF rom:"PaulW" =0ADate:Wed, Oct 28, 2015 at 10:17=0ASubject :Yak-List: Re: Cyl. Head Temperature Delta=0A=0A--> Yak-List message posted by: "PaulW" =0A=0AHi=0A=0AI have been looking and Googl ing, but cannot find the info I need. I am sure someone here will know.=0A =0A1. Where is the CHT sensor fitted? I read somewhere at the hottest and c oldest cylinder. So there are two? Also read it is close to the rear sparkp lug?=0A=0A2. Which cylinder is which? How do you count if you are in front or rear? I know 1 is at the top, but which one exactly and which direction do you start counting?=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp ://forums.matronics.com/viewtopic.php?p=448330#448330=0A=0A=0A=0A=0A=0A ==============0A=0A=0A=0A ________________________________ Message 6 _____________________________________ Time: 03:12:28 PM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Re: Cyl. Head Temperature Delta CHT probes are under the rear spark plugs.=C2- On the Yak 52, both are un der #4. (Some people split them between 3 and 4). =C2- On the CJ they are typically split between two rear plugs.=C2- #4 and #3 or possibly #2. =C2- They are easy to see.=C2- Look for a wrapped wire bundle going to the rear plugs. Looking at the front of the engine, Cylinder number 1 is at the very top. =C2- looking at the front of the engine, count clockwise 1,2,3,4,5 then t he sum, 6,7,8,9.Dennis=C2- From: PaulW To: yak-list@matronics.com Sent: Wednesday, October 28, 2015 12:55 PM Subject: Yak-List: Re: Cyl. Head Temperature Delta Hi I have been looking and Googling, but cannot find the info I need. I am sur e someone here will know. 1. Where is the CHT sensor fitted? I read somewhere at the hottest and cold est cylinder. So there are two? Also read it is close to the rear sparkplug ? 2. Which cylinder is which? How do you count if you are in front or rear? I know 1 is at the top, but which one exactly and which direction do you sta rt counting? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=448330#448330 S - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ________________________________ Message 7 _____________________________________ Time: 04:52:02 PM PST US Subject: Yak-List: Re: Yak 55M vs Yak 55 From: "rmross" I have seen an on-line reference which states that the 55 has a roll rate of 4 rad/sec, which is about 230 deg/sec. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=448338#448338 ________________________________ Message 8 _____________________________________ Time: 05:38:25 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Re: Cyl. Head Temperature Delta Cj6, Yk50, 52, Or?? -----Original Message----- From: PaulW Sent: Wednesday, October 28, 2015 9:55 AM Subject: Yak-List: Re: Cyl. Head Temperature Delta Hi I have been looking and Googling, but cannot find the info I need. I am sure someone here will know. 1. Where is the CHT sensor fitted? I read somewhere at the hottest and coldest cylinder. So there are two? Also read it is close to the rear sparkplug? 2. Which cylinder is which? How do you count if you are in front or rear? I know 1 is at the top, but which one exactly and which direction do you start counting? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=448330#448330 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.