---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Thu 12/17/15: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:28 AM - CJ6 Alternator (fougapilot) 2. 09:56 AM - Re:CJ6 Alternator (Frank Stelwagon) 3. 10:40 AM - CJ Wobble- No Pressure/Check Valve (Hank Gibson) 4. 04:52 PM - Re: Were outta here!! (Greg Wrobel) ________________________________ Message 1 _____________________________________ Time: 09:28:33 AM PST US Subject: Yak-List: CJ6 Alternator From: "fougapilot" Guys, When we changed to the M14p engine on my CJ back in the late 90s, we also took out the generator and went with an alternator. Well, life being what it is, my alternator died this fall after 17 years of loyal service. I took it to my local Dynamo shop to see if they could do something to revive it, but after kindly looking at it they gave it back to me with the "deer in the headlights" look on their faces. So it would seem I am back to square one. At this point, I am looking for info on the alternator to see if I could just buy a new one and install it. Here is what I know about it: It is an AC Delco 24 volt alternator. We cannot find a model or part number on it. I believe it was sold by Yakity Yaks, but am far from certain. The rotor shaft was changed and a base block was machined to fit the M14p. If anyone out there know about these alternators, specifically looking for model or part number, I would appreciate the info. Thank you. Dan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=451000#451000 ________________________________ Message 2 _____________________________________ Time: 09:56:24 AM PST US From: "Frank Stelwagon" Subject: Yak-List: RE:CJ6 Alternator You are not the first one with this problem. It was a nice piece of machine work but now leaves you in a hopeless situation. The answer is to go with the Band C alternator system. Not cheap but it works. You will also have to sort on the wiring changes that were made and add some new parts Circuit breakers (3) and some new wiring. Follow the B&C instructions. Contact Jill for information. Frank CJ6-A ________________________________ Message 3 _____________________________________ Time: 10:40:46 AM PST US From: Hank Gibson Subject: Yak-List: CJ Wobble- No Pressure/Check Valve Hey All- attempted a start the other day and had zero fuel pressure from wobble pump and handle had no resistance like it was not "primed" at all.=C2- Remove d pump and no fuel spilled from in or out fuel lines like it should have. =C2- Pump is fine so my question is has anyone ever found the check valve to cause a problem before.=C2- It is located in belly slightly left of c enterline aft of the nose wheel well and there is a small hinged access pan el.=C2- It is plumbed in parallel to the wobble pump and I assume is ther e to keep fuel from backflowing from the firewall back to the header tank. =C2- Have never touched that check valve.=C2- Possible blockage?=C2- Can I pull the check valve without draining all fuel from the aircraft?=C2 - Ideas? thanks - Hoot=C2-Hank Gibson 904-738-3240 Mobile 904-213-1760 Home hank@affordablewarbird.com hkgibby@yahoo.com hank.gibson@fnf.com=C2- ________________________________ Message 4 _____________________________________ Time: 04:52:30 PM PST US Subject: Re: Yak-List: Were outta here!! From: Greg Wrobel Hey Doug, is this the trip you have been promising Kathleen by taking her to the mountains?? Hey Hawaii has a mountain or two. Outside Kanapalli (sp) you can watch an absolutely breathtaking sunrise. Get there early 0430 am and don't be surprised if you see a line of tail lights for miles going up to the top. A religious experience. Thanks for everything you do. Greg "Clouddog" Wrobel On Dec 14, 2015 7:51 PM, "doug sapp" wrote: > Guys and gals, > Kathleen and I have decided to take a winter break and head over the pond > to visit Batman and his bride. Hopefully things will be warmer in Hawaii > than in Omak. We will be away from the office Dec 20 through Jan 5th. > > We would like to take this opportunity to thank you all for your support > in this and years past, and wish you all a very merry Christmas and a great > 2016. > > Here's hoping the old grey haired fat man brings you everything you > deserve! :o) > > Best Christmas wishes from our house to yours, > > Doug and Kathleen > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.