Today's Message Index:
----------------------
1. 07:32 AM - Brake failure (Dan caldwell)
2. 03:41 PM - Fw: voltage regulator (doug sapp)
3. 08:16 PM - Re: Fw: voltage regulator (Roger Kemp)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Can anyone offer advice on this issue?
I have a Yak 55M with the Cleveland brake conversion.
For the past several flights my brakes were fine for taxi out and run up but after
landing and taxi back to the hangar I had difficulty holding the right brake
for scavenge run up. The rotor was not any warmer than the left one.
Yesterday the right brake failed completely after landing. Coincidentally the temperature
was 15* below previous flights (50*).
The reservoir is full with normal pedal travel. My aircraft manual speaks about
a gauze filter in the master cylinder to preclude loss of fluid during inverted
flight. Could this be blocking normal pressure equilibrium after extended inverted
flight and descent to sea level?
Im guessing here cause I don't really understand how the mechanism works.
Thanks, Dan Caldwell KPGD
Sent from my iPad
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fwd: voltage regulator |
Anyone out there able to help this fellow with some detail on how to
install a solid state regulator in his CJ. He has the new solid state reg
with the install kit, but no schematics. If you have any ideas/drawings or
schematics please let us know.
Doug,
I was wondering if you have had any luck with finding some instructions on
how to install the solid state regulator or locating a serviceable old
style replacement.
We are about to install the one you sent me if we have no option but the
more information we have, all the better.
Cheers,
Andrew
a_horsburgh@bigpond.com
Sent from my iPad
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fwd: voltage regulator |
Look on the B& C website. They used to have the schematics posted. Have not l
ooked lately though.
Doc
Sent from my iPad
> On Jan 13, 2016, at 5:33 PM, doug sapp <dougsappllc@gmail.com> wrote:
>
>
> Anyone out there able to help this fellow with some detail on how to insta
ll a solid state regulator in his CJ. He has the new solid state reg with t
he install kit, but no schematics. If you have any ideas/drawings or schema
tics please let us know.
>
> Doug,
>
> I was wondering if you have had any luck with finding some instructions on
how to install the solid state regulator or locating a serviceable old styl
e replacement.
>
> We are about to install the one you sent me if we have no option but the m
ore information we have, all the better.
>
> Cheers,
> Andrew
> a_horsburgh@bigpond.com
>
> Sent from my iPad
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|