---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Fri 02/05/16: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:18 PM - Re: Garmin G3X installation (John B) ________________________________ Message 1 _____________________________________ Time: 10:18:01 PM PST US From: John B Subject: Re: Yak-List: Garmin G3X installation Does anyone have any idea how much voltage is required to fire the starting vibrator? I believe the batteries in the Yak 55M are old, and low in base voltage. It was cool today, and the airplane was difficult to start. Is there a replacement starting vibrator available? Do the originals from Russia hold up well? Thank you! john b On Wed, Feb 3, 2016 at 9:14 AM, Jim Burke wrote: > Thanks for the response. Area behind the rear seat has the two air tanks > which require 8.2 feet separation, the aft fuselage has control cable tha t > require 3 feet clearance plus the rear landing gear assembly. Wing tips > are a possibility, but the nav lights and strobes are a problem plus > routing the wiring through the wing. Looks like I may be the first to pu t > a G3X in a TW. > > > Off line response from Sonny Schilleci at Auric Avionics suggests using a > Survey Tool to locate a low noise area. > > > Jimmy > > > *From:* owner-yak-list-server@matronics.com [mailto: > owner-yak-list-server@matronics.com] *On Behalf Of *Roger Kemp > *Sent:* Tuesday, February 2, 2016 9:32 PM > *To:* yak-list@matronics.com > *Subject:* Re: Yak-List: Garmin G3X installation > > > Try under the turtle deck aft of the rear cockpit. I did that for my Dyno n > in the 50. Worked fine on headings after slaving the DG. Mount it first > with industrial adhesive backed Velcro. That way you can move it if you d o > not like it. > > Doc > > Sent from my iPad > > > On Feb 2, 2016, at 1:58 PM, Jim Burke wrote: > > I=99m installing a Garmin G3X in my Yak52TW and trying to located a place to > install the magnetometer (GMU22). Has anyone done this installation in a > TW or have a suggestion on a location that meets Garmin=99s require ments for > the magnetometer? > > > Jimmy Burke > > Jbyak52@gmail.com > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.