Yak-List Digest Archive

Sun 05/22/16


Total Messages Posted: 13



Today's Message Index:
----------------------
 
     1. 05:01 AM - YAK 50 brakes (Gordon Price)
     2. 07:14 AM - Grease (=?utf-8?Q?H=C3=A5vard_Dale?=)
     3. 07:14 AM - Grease (=?utf-8?Q?H=C3=A5vard_Dale?=)
     4. 08:06 AM - Re: YAK 50 brakes (A. Dennis Savarese)
     5. 08:46 AM - Re: Grease (Roger Kemp)
     6. 09:32 AM - Re: Grease (=?utf-8?Q?H=C3=A5vard_Dale?=)
     7. 11:39 AM - Re: Serial #/Build Date (jay-dub)
     8. 11:40 AM - CJ6 / Huosai Propellors (Walter Lannon)
     9. 01:44 PM - Rudder pedal stirrups??? Are replacements available? (John B)
    10. 02:05 PM - Re: Rudder pedal stirrups??? Are replacements available? (Paul White)
    11. 02:20 PM - Re: Rudder pedal stirrups??? Are replacements available? (L129bs)
    12. 06:30 PM - Re: Rudder pedal stirrups??? Are replacements available? (Frank Stelwagon)
    13. 07:13 PM - Re: Rudder pedal stirrups??? Are replacements available? (Roger Kemp)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:01:23 AM PST US
    From: Gordon Price <gord@thedampub.ca>
    Subject: YAK 50 brakes
    I am looking for a solution to a brake problem. I cannot get enough pressure on the brake handle to hold the aircraft during the engine runup . The airplane creeps ahead. We tried adjusting the end of the boden cable but that just puts the brakes on without squeezing the handle. It seems like the pucks are slipping so maybe they need replacement or roughing up? Any ideas? Thanks Gord Price


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:14:35 AM PST US
    From: =?utf-8?Q?H=C3=A5vard_Dale?= <yaknorway52@gmail.com>
    Subject: Grease
    Hi, Any have information on What grease that can be used in the flap Actuator on a Yak 52? Br Havard Sendt fra min iPhone > Den 22. mai 2016 kl. 09.03 skrev Yak-List Digest Server <yak-list@matronics.com>: > > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Yak-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Yak-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 16-05-21&Archive=Yak > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 16-05-21&Archive=Yak > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Yak-List Digest Archive > --- > Total Messages Posted Sat 05/21/16: 3 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 02:38 PM - Re: Serial #/Build Date (jay-dub) > 2. 09:06 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) > 3. 09:12 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 02:38:00 PM PST US > Subject: Yak-List: Re: Serial #/Build Date > From: "jay-dub" <flyjnw@gmail.com> > > > Mine is 3151215. Presumably number 15, batch 31, factory 512. > > Would you mind telling me which factory and the year please? Our UK paperwork says > 1976... > > -------- > CJ and Yak-52 owner > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=456430#456430 > > > ________________________________ Message 2 _____________________________________ > > > Time: 09:06:57 PM PST US > From: cjpilot710@aol.com > Subject: Re: Yak-List: Re: Serial #/Build Date > > Batch 31 was 21 aircraft - built between Sept 1975 and Jan 1976. All > aircraft went to the PLAF. I know there was factory "512" but I don't know > where. > > Jim "Pappy" Goolsby > > > In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, > flyjnw@gmail.com writes: > > --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> > > Mine is 3151215. Presumably number 15, batch 31, factory 512. > > Would you mind telling me which factory and the year please? Our UK > paperwork says 1976... > > -------- > CJ and Yak-52 owner > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=456430#456430 > > > ________________________________ Message 3 _____________________________________ > > > Time: 09:12:11 PM PST US > From: cjpilot710@aol.com > Subject: Re: Yak-List: Re: Serial #/Build Date > > BTW the largest batches were #24 to #29 with each batch made of 80 > aircraft. Constructed between Oct 1968 and June 1975. > > Jim "Pappy" Goolsby > > > In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, > flyjnw@gmail.com writes: > > --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> > > Mine is 3151215. Presumably number 15, batch 31, factory 512. > > Would you mind telling me which factory and the year please? Our UK > paperwork says 1976... > > -------- > CJ and Yak-52 owner > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=456430#456430 > > > > > > > > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:14:41 AM PST US
    From: =?utf-8?Q?H=C3=A5vard_Dale?= <yaknorway52@gmail.com>
    Subject: Grease
    Hi, Any have information on What grease that can be used in the flap Actuator on a Yak 52? Br Havard Sendt fra min iPhone > Den 22. mai 2016 kl. 09.03 skrev Yak-List Digest Server <yak-list@matronics.com>: > > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Yak-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Yak-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 16-05-21&Archive=Yak > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 16-05-21&Archive=Yak > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Yak-List Digest Archive > --- > Total Messages Posted Sat 05/21/16: 3 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 02:38 PM - Re: Serial #/Build Date (jay-dub) > 2. 09:06 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) > 3. 09:12 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 02:38:00 PM PST US > Subject: Yak-List: Re: Serial #/Build Date > From: "jay-dub" <flyjnw@gmail.com> > > > Mine is 3151215. Presumably number 15, batch 31, factory 512. > > Would you mind telling me which factory and the year please? Our UK paperwork says > 1976... > > -------- > CJ and Yak-52 owner > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=456430#456430 > > > ________________________________ Message 2 _____________________________________ > > > Time: 09:06:57 PM PST US > From: cjpilot710@aol.com > Subject: Re: Yak-List: Re: Serial #/Build Date > > Batch 31 was 21 aircraft - built between Sept 1975 and Jan 1976. All > aircraft went to the PLAF. I know there was factory "512" but I don't know > where. > > Jim "Pappy" Goolsby > > > In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, > flyjnw@gmail.com writes: > > --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> > > Mine is 3151215. Presumably number 15, batch 31, factory 512. > > Would you mind telling me which factory and the year please? Our UK > paperwork says 1976... > > -------- > CJ and Yak-52 owner > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=456430#456430 > > > ________________________________ Message 3 _____________________________________ > > > Time: 09:12:11 PM PST US > From: cjpilot710@aol.com > Subject: Re: Yak-List: Re: Serial #/Build Date > > BTW the largest batches were #24 to #29 with each batch made of 80 > aircraft. Constructed between Oct 1968 and June 1975. > > Jim "Pappy" Goolsby > > > In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, > flyjnw@gmail.com writes: > > --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> > > Mine is 3151215. Presumably number 15, batch 31, factory 512. > > Would you mind telling me which factory and the year please? Our UK > paperwork says 1976... > > -------- > CJ and Yak-52 owner > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=456430#456430 > > > > > > > > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:06:05 AM PST US
    From: "A. Dennis Savarese" <dsavarese0812@bellsouth.net>
    Subject: Re: YAK 50 brakes
    A couple of things Gordo.=C2- First you should remove the hubs and confir m the felt grease seals are in place on the inside of the hub.=C2- If the grease seal is broken or missing, grease from the bearings is being "spash ed" all over the brakes and the drum area.=C2- Replace the felt grease se al.=C2- Then clean the brake pads with avgas.=C2- Let them dry.=C2- T hen scuff them up with 60 grit wet/dry sandpaper.=C2- Do this on both mai ns.=C2- If you don't know where the felt grease seals are, particularly t he one on the back side of the hub, contact me off-list and I will do my be st to "point" you to it. Secondly, you may want to rebuild the brake reducing valve.=C2- I have se en on several occasions the brake reducing valve was not outputing an adequ ate amount of pressure.=C2- Doug Sapp, the CJ6 parts supplier, has the re building kits.=C2- It is 100% identical to the brake reducing valve on th e Yak 50 and 52.=C2- Doug also has the felt seals. Dennis From: Gordon Price <gord@thedampub.ca> To: yak-list@matronics.com Sent: Sunday, May 22, 2016 7:58 AM Subject: Yak-List: YAK 50 brakes I am looking for a solution to a brake problem.=C2- I cannot get enough p ressure on the brake handle to hold the aircraft during the engine runup . The airplane creeps ahead.=C2- We tried adjusting the end of the boden ca ble but that just puts the brakes on without squeezing the handle. It seems like the pucks are slipping so maybe they need replacement or roughing up? =C2- Any ideas?=C2- Thanks=C2- Gord Price S - WIKI - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:46:39 AM PST US
    Subject: Re: Grease
    From: Roger Kemp <f16viperdoc@me.com>
    None in the valve. I've used aeroshell (forgot the number) on the flap hinge torque tubes. Sorry am 30 miles away from my hanger at this time so can't look in my supply cabinet for the exact #. Doc Sent from my iPad > On May 22, 2016, at 9:13 AM, Hvard Dale <yaknorway52@gmail.com> wrote: > > > Hi, > > Any have information on What grease that can be used in the flap Actuator on a Yak 52? > > Br > Havard > > > > Sendt fra min iPhone > >> Den 22. mai 2016 kl. 09.03 skrev Yak-List Digest Server <yak-list@matronics.com>: >> >> * >> >> ================================================= >> Online Versions of Today's List Digest Archive >> ================================================= >> >> Today's complete Yak-List Digest can also be found in either of the >> two Web Links listed below. The .html file includes the Digest formatted >> in HTML for viewing with a web browser and features Hyperlinked Indexes >> and Message Navigation. The .txt file includes the plain ASCII version >> of the Yak-List Digest and can be viewed with a generic text editor >> such as Notepad or with a web browser. >> >> HTML Version: >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 16-05-21&Archive=Yak >> >> Text Version: >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 16-05-21&Archive=Yak >> >> >> =============================================== >> EMail Version of Today's List Digest Archive >> =============================================== >> >> >> ---------------------------------------------------------- >> Yak-List Digest Archive >> --- >> Total Messages Posted Sat 05/21/16: 3 >> ---------------------------------------------------------- >> >> >> Today's Message Index: >> ---------------------- >> >> 1. 02:38 PM - Re: Serial #/Build Date (jay-dub) >> 2. 09:06 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) >> 3. 09:12 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) >> >> >> >> ________________________________ Message 1 _____________________________________ >> >> >> Time: 02:38:00 PM PST US >> Subject: Yak-List: Re: Serial #/Build Date >> From: "jay-dub" <flyjnw@gmail.com> >> >> >> Mine is 3151215. Presumably number 15, batch 31, factory 512. >> >> Would you mind telling me which factory and the year please? Our UK paperwork says >> 1976... >> >> -------- >> CJ and Yak-52 owner >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=456430#456430 >> >> >> ________________________________ Message 2 _____________________________________ >> >> >> Time: 09:06:57 PM PST US >> From: cjpilot710@aol.com >> Subject: Re: Yak-List: Re: Serial #/Build Date >> >> Batch 31 was 21 aircraft - built between Sept 1975 and Jan 1976. All >> aircraft went to the PLAF. I know there was factory "512" but I don't know >> where. >> >> Jim "Pappy" Goolsby >> >> >> In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, >> flyjnw@gmail.com writes: >> >> --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> >> >> Mine is 3151215. Presumably number 15, batch 31, factory 512. >> >> Would you mind telling me which factory and the year please? Our UK >> paperwork says 1976... >> >> -------- >> CJ and Yak-52 owner >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=456430#456430 >> >> >> ________________________________ Message 3 _____________________________________ >> >> >> Time: 09:12:11 PM PST US >> From: cjpilot710@aol.com >> Subject: Re: Yak-List: Re: Serial #/Build Date >> >> BTW the largest batches were #24 to #29 with each batch made of 80 >> aircraft. Constructed between Oct 1968 and June 1975. >> >> Jim "Pappy" Goolsby >> >> >> In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, >> flyjnw@gmail.com writes: >> >> --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> >> >> Mine is 3151215. Presumably number 15, batch 31, factory 512. >> >> Would you mind telling me which factory and the year please? Our UK >> paperwork says 1976... >> >> -------- >> CJ and Yak-52 owner >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=456430#456430 >> >> >> >> >> >> >> >> >> > > > > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:32:17 AM PST US
    From: =?utf-8?Q?H=C3=A5vard_Dale?= <yaknorway52@gmail.com>
    Subject: Re: Grease
    Thanks, Will use Royco 43, had that in my secret store:-) Br Havard Sendt fra min iPhone > Den 22. mai 2016 kl. 17.45 skrev Roger Kemp <f16viperdoc@me.com>: > > > None in the valve. I've used aeroshell (forgot the number) on the flap hinge torque tubes. > Sorry am 30 miles away from my hanger at this time so can't look in my supply cabinet for the exact #. > Doc > > Sent from my iPad > >> On May 22, 2016, at 9:13 AM, Hvard Dale <yaknorway52@gmail.com> wrote: >> >> >> Hi, >> >> Any have information on What grease that can be used in the flap Actuator on a Yak 52? >> >> Br >> Havard >> >> >> >> Sendt fra min iPhone >> >>> Den 22. mai 2016 kl. 09.03 skrev Yak-List Digest Server <yak-list@matronics.com>: >>> >>> * >>> >>> ================================================= >>> Online Versions of Today's List Digest Archive >>> ================================================= >>> >>> Today's complete Yak-List Digest can also be found in either of the >>> two Web Links listed below. The .html file includes the Digest formatted >>> in HTML for viewing with a web browser and features Hyperlinked Indexes >>> and Message Navigation. The .txt file includes the plain ASCII version >>> of the Yak-List Digest and can be viewed with a generic text editor >>> such as Notepad or with a web browser. >>> >>> HTML Version: >>> >>> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 16-05-21&Archive=Yak >>> >>> Text Version: >>> >>> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 16-05-21&Archive=Yak >>> >>> >>> =============================================== >>> EMail Version of Today's List Digest Archive >>> =============================================== >>> >>> >>> ---------------------------------------------------------- >>> Yak-List Digest Archive >>> --- >>> Total Messages Posted Sat 05/21/16: 3 >>> ---------------------------------------------------------- >>> >>> >>> Today's Message Index: >>> ---------------------- >>> >>> 1. 02:38 PM - Re: Serial #/Build Date (jay-dub) >>> 2. 09:06 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) >>> 3. 09:12 PM - Re: Re: Serial #/Build Date (cjpilot710@aol.com) >>> >>> >>> >>> ________________________________ Message 1 _____________________________________ >>> >>> >>> Time: 02:38:00 PM PST US >>> Subject: Yak-List: Re: Serial #/Build Date >>> From: "jay-dub" <flyjnw@gmail.com> >>> >>> >>> Mine is 3151215. Presumably number 15, batch 31, factory 512. >>> >>> Would you mind telling me which factory and the year please? Our UK paperwork says >>> 1976... >>> >>> -------- >>> CJ and Yak-52 owner >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=456430#456430 >>> >>> >>> ________________________________ Message 2 _____________________________________ >>> >>> >>> Time: 09:06:57 PM PST US >>> From: cjpilot710@aol.com >>> Subject: Re: Yak-List: Re: Serial #/Build Date >>> >>> Batch 31 was 21 aircraft - built between Sept 1975 and Jan 1976. All >>> aircraft went to the PLAF. I know there was factory "512" but I don't know >>> where. >>> >>> Jim "Pappy" Goolsby >>> >>> >>> In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, >>> flyjnw@gmail.com writes: >>> >>> --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> >>> >>> Mine is 3151215. Presumably number 15, batch 31, factory 512. >>> >>> Would you mind telling me which factory and the year please? Our UK >>> paperwork says 1976... >>> >>> -------- >>> CJ and Yak-52 owner >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=456430#456430 >>> >>> >>> ________________________________ Message 3 _____________________________________ >>> >>> >>> Time: 09:12:11 PM PST US >>> From: cjpilot710@aol.com >>> Subject: Re: Yak-List: Re: Serial #/Build Date >>> >>> BTW the largest batches were #24 to #29 with each batch made of 80 >>> aircraft. Constructed between Oct 1968 and June 1975. >>> >>> Jim "Pappy" Goolsby >>> >>> >>> In a message dated 5/21/2016 5:38:23 P.M. Eastern Daylight Time, >>> flyjnw@gmail.com writes: >>> >>> --> Yak-List message posted by: "jay-dub" <flyjnw@gmail.com> >>> >>> Mine is 3151215. Presumably number 15, batch 31, factory 512. >>> >>> Would you mind telling me which factory and the year please? Our UK >>> paperwork says 1976... >>> >>> -------- >>> CJ and Yak-52 owner >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=456430#456430 > > > > >


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:39:47 AM PST US
    Subject: Re: Serial #/Build Date
    From: "jay-dub" <flyjnw@gmail.com>
    Thanks. -------- CJ and Yak-52 owner Read this topic online here: http://forums.matronics.com/viewtopic.php?p=456450#456450


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:40:06 AM PST US
    From: "Walter Lannon" <wlannon@shaw.ca>
    Subject: CJ6 / Huosai Propellors
    Over the past winter I have stayed out of trouble by doing a complete overhaul of two J9-G1 props. One has new blades, both are in like-new condition and are offered for sale. If you need a replacement or want a spare contact me OFF-LIST at wlannon@shaw.ca or 250-485-8698.


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:44:25 PM PST US
    From: John B <jbsoar@gmail.com>
    Subject: Rudder pedal stirrups??? Are replacements available?
    The 55 has them, perhaps the 50 and 52 do as well. I broke one of the leather stirrups. Does anyone have a source for replacements? Thank you! John B Phoenix, AZ


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:05:20 PM PST US
    From: Paul White <trash757@gmail.com>
    Subject: Re: Rudder pedal stirrups??? Are replacements available?
    Sent from my iPhone > On May 22, 2016, at 1:43 PM, John B <jbsoar@gmail.com> wrote: > > The 55 has them, perhaps the 50 and 52 do as well. I broke one of the leather stirrups. Does anyone have a source for replacements? > Thank you! > John B > Phoenix, AZ


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:20:07 PM PST US
    From: L129bs <l129bs@gmail.com>
    Subject: Re: Rudder pedal stirrups??? Are replacements available?
    SSBoYXZlIHNwdXJzLiAKCgoKU2VudCBmcm9tIG15IFNhbXN1bmcgR2FsYXh5IHNtYXJ0cGhvbmUu CgotLS0tLS0tLSBPcmlnaW5hbCBtZXNzYWdlIC0tLS0tLS0tCkZyb206IFBhdWwgV2hpdGUgPHRy YXNoNzU3QGdtYWlsLmNvbT4gCkRhdGU6MDUvMjIvMjAxNiAgMTU6MDQgIChHTVQtMDc6MDApIApU bzogeWFrLWxpc3RAbWF0cm9uaWNzLmNvbSAKQ2M6ICAKU3ViamVjdDogUmU6IFlhay1MaXN0OiBS dWRkZXIgcGVkYWwgc3RpcnJ1cHM/Pz8gQXJlIHJlcGxhY2VtZW50cyBhdmFpbGFibGU/IAoKLS0+ IFlhay1MaXN0IG1lc3NhZ2UgcG9zdGVkIGJ5OiBQYXVsIFdoaXRlIDx0cmFzaDc1N0BnbWFpbC5j b20+DQoNCg0KDQpTZW50IGZyb20gbXkgaVBob25lDQoNCj4gT24gTWF5IDIyLCAyMDE2LCBhdCAx OjQzIFBNLCBKb2huIEIgPGpic29hckBnbWFpbC5jb20+IHdyb3RlOg0KPiANCj4gVGhlIDU1IGhh cyB0aGVtLCBwZXJoYXBzIHRoZSA1MCBhbmQgNTIgZG8gYXMgd2VsbC4gIEkgYnJva2Ugb25lIG9m IHRoZSBsZWF0aGVyIHN0aXJydXBzLiAgRG9lcyBhbnlvbmUgaGF2ZSBhIHNvdXJjZSBmb3IgcmVw bGFjZW1lbnRzPw0KPiBUaGFuayB5b3UhDQo+IEpvaG4gQg0KPiBQaG9lbml4LCBBWg0KDQoNCl8t PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09DQpfLT0gICAgICAgICAgLSBUaGUgWWFrLUxpc3QgRW1haWwgRm9ydW0gLQ0KXy09IFVzZSB0 aGUgTWF0cm9uaWNzIExpc3QgRmVhdHVyZXMgTmF2aWdhdG9yIHRvIGJyb3dzZQ0KXy09IHRoZSBt YW55IExpc3QgdXRpbGl0aWVzIHN1Y2ggYXMgTGlzdCBVbi9TdWJzY3JpcHRpb24sDQpfLT0gQXJj aGl2ZSBTZWFyY2ggJiBEb3dubG9hZCwgNy1EYXkgQnJvd3NlLCBDaGF0LCBGQVEsDQpfLT0gUGhv dG9zaGFyZSwgYW5kIG11Y2ggbXVjaCBtb3JlOg0KXy09DQpfLT0gICAtLT4gaHR0cDovL3d3dy5t YXRyb25pY3MuY29tL05hdmlnYXRvcj9ZYWstTGlzdA0KXy09DQpfLT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PQ0KXy09ICAgICAgICAg ICAgICAgLSBNQVRST05JQ1MgV0VCIEZPUlVNUyAtDQpfLT0gU2FtZSBncmVhdCBjb250ZW50IGFs c28gYXZhaWxhYmxlIHZpYSB0aGUgV2ViIEZvcnVtcyENCl8tPQ0KXy09ICAgLS0+IGh0dHA6Ly9m b3J1bXMubWF0cm9uaWNzLmNvbQ0KXy09DQpfLT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PQ0KXy09ICAgICAgICAgICAgICAtIE5FVyBN QVRST05JQ1MgTElTVCBXSUtJIC0NCl8tPSBBZGQgc29tZSBpbmZvIHRvIHRoZSBNYXRyb25pY3Mg RW1haWwgTGlzdCBXaWtpIQ0KXy09ICAgLS0+IGh0dHA6Ly93aWtpLm1hdHJvbmljcy5jb20NCl8t PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09DQpfLT0gICAgICAgICAgICAgLSBMaXN0IENvbnRyaWJ1dGlvbiBXZWIgU2l0ZSAtDQpfLT0g IFRoYW5rIHlvdSBmb3IgeW91ciBnZW5lcm91cyBzdXBwb3J0IQ0KXy09ICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgLU1hdHQgRHJhbGxlLCBMaXN0IEFkbWluLg0KXy09ICAgLS0+IGh0dHA6 Ly93d3cubWF0cm9uaWNzLmNvbS9jb250cmlidXRpb24NCl8tPT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQoNCg0KDQo


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:30:06 PM PST US
    From: "Frank Stelwagon" <pfstelwagon@earthlink.net>
    Subject: Re: Rudder pedal stirrups??? Are replacements available?
    In Arizona find a Cow. ----- Original Message ----- From: "Paul White" <trash757@gmail.com> Sent: Sunday, May 22, 2016 2:04 PM Subject: Re: Yak-List: Rudder pedal stirrups??? Are replacements available? > > > Sent from my iPhone > >> On May 22, 2016, at 1:43 PM, John B <jbsoar@gmail.com> wrote: >> >> The 55 has them, perhaps the 50 and 52 do as well. I broke one of the >> leather stirrups. Does anyone have a source for replacements? >> Thank you! >> John B >> Phoenix, AZ > > >


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:13:58 PM PST US
    Subject: Re: Rudder pedal stirrups??? Are replacements available?
    From: Roger Kemp <f16viperdoc@me.com>
    That's pretty funny there. You can fabricate a set Or check with Doug Sapp. You actually use them? Doc Sent from my iPad > On May 22, 2016, at 8:29 PM, Frank Stelwagon <pfstelwagon@earthlink.net> wrote: > > > In Arizona find a Cow. > ----- Original Message ----- From: "Paul White" <trash757@gmail.com> > To: <yak-list@matronics.com> > Sent: Sunday, May 22, 2016 2:04 PM > Subject: Re: Yak-List: Rudder pedal stirrups??? Are replacements available? > > >> >> >> >> Sent from my iPhone >> >>> On May 22, 2016, at 1:43 PM, John B <jbsoar@gmail.com> wrote: >>> >>> The 55 has them, perhaps the 50 and 52 do as well. I broke one of the leather stirrups. Does anyone have a source for replacements? >>> Thank you! >>> John B >>> Phoenix, AZ > > > > >




    Other Matronics Email List Services

  • Post A New Message
  •   yak-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Yak-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/yak-list
  • Browse Yak-List Digests
  •   http://www.matronics.com/digest/yak-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --