Today's Message Index:
----------------------
1. 02:41 AM - Re: Dumb oil line question (A. Dennis Savarese)
2. 04:06 AM - Re: [Non-DoD Source] Re: Taxi/Landing light for Yak 18T (Michael Wikstrom)
3. 04:15 AM - Re: [Non-DoD Source] Re: Taxi/Landing light for Yak 18T (Jean-Philippe Martel)
4. 05:22 PM - CJ Panel Blank (Jon Boede)
5. 06:22 PM - Re: CJ Panel Blank (Larry Pine)
6. 08:44 PM - Re: Propell Counterwight torque value (Walter Lannon)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Dumb oil line question |
Sorry guys.=C2- I do not mean the oil dilution line which comes from the
fuel pump and goes into the oil dilution valve which is, as Doc says, on th
e center of the lower fire wall.=C2- The small, flexible line that goes d
irectly under the oil tank and LOOKS like it attaches to the oil tank, actu
ally attaches to a firewall fitting right under the oil tank.=C2- The two
oil pressure transducers are on the back side of the firewall where that s
mall, flexible oil line attaches to the firewall.=C2- That is the oil pre
ssure line that comes FROM the oil pump which is what I believe Doc was ref
erring to.=C2- The fuel dilution valve passes fuel through it.=C2- Not
oil. =C2- If one were to follow the output line from the oil dilution val
ve (look at the arrow on the oil dilution valve), yes it does go to the oil
pump.=C2- But is on the other side of the oil pump.=C2- This is where
fuel is pumped into the oil pump to dilute the oil.=C2-=C2- Many people
have disabled the fuel dilution toggle switch in the cockpit or simply don
't use this function.Dennis
From: Roger Kemp <f16viperdoc@me.com>
To: yak-list@matronics.com
Sent: Monday, July 25, 2016 10:22 PM
Subject: Re: Yak-List: Dumb oil line question
He does. The oil pressure line comes off the base of the oil pump and goes
directly back to the sending unit on the center of the of the lower fire wa
ll.
Doc
Sent from my iPad
> On Jul 20, 2016, at 12:15 PM, George Coy <george.coy@gmail.com> wrote:
>
>
> I think Dennis means is the line for the oil dilution
>
> Sent from my iPhone
>
>> On Jul 20, 2016, at 1:07 PM, A. Dennis Savarese <dsavarese0812@bellsouth
.net> wrote:
>>
south.net>
>>
>> If you look closely, the line that appears to go to the bottom of the oi
l tank actually attaches to a fitting on the firewall. It's the line for th
e oil pressure.
>> Dennis.
>>
>> Sent from my iPhone
>>
>>> On Jul 19, 2016, at 10:22 PM, "greg.barnhard@gmail.com" <greg.barnhard@
gmail.com> wrote:
>>>
d@gmail.com>
>>>
>>> Hello everyone,
>>>
>>> Sorry if this is a dumb question. I'm a relatively new Yak 52W owner. I
've been going through the maintenance manuals trying to figure it out but
I can't seem to find it. What is the purpose of the smaller line that comes
off the bottom center of the oil tank to the engine. Is that another retur
n line? I know the line that comes off the aircraft left side about half wa
y up to the screen down at the bottom aircraft right on the firewall then g
oes to the pump but for the life of me I can't figure out what the line out
of the bottom center does. Unfortunately I am not near the plane to look a
t it and try to figure it out and was hoping someone much smarter than I OM
this list could enlighten me.
>>>
>>> Thanks!
>>> Greg
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=458398#458398
>
>
>
>
>
S -
WIKI -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Taxi/Landing light for Yak 18T |
Yes, and I saw a G registered yak 52 when I was there recently, assume that w
as yours.
Where is yours based? Mine is in Cannes
Michael Wikstr=C3=B6m [iPhone]
Marine Satellite Systems
Les Espaces de Sophia
80 Route des Lucioles
06560 Valbonne
France
Tel: +33 493 958 093
Gsm: +33 607 44 40 11
Fax: +33 493 958 042
Email: michael@mssfrance.com
Web: www.mssfrance.com
VAT No: FR69347398729
> On 26 Jul 2016, at 08:54, Jean-Philippe Martel <marty.jpm@gmail.com> wrote
:
>
> Hi Michael,
>
> I also live in France and fly a Yak 52. For sure, there are shops/dealers
for tractors in our beautiful country.
>
> By the way, few days ago, I saw a Yak 18 at Bruno Ducreux's workshop in Da
rois. Was it yours?
>
> Best regards,
>
> Jean-Philippe MARTEL
> G-YYAK
>
> Le 25 juil. 2016 23:29, "Michael Wikstrom" <michael@wikstrom.cc> a =C3=A9c
rit :
>>
>> Thanks Mark & Walt & Michael Ali-Paz
>> Both these bulbs cost approximately the same as an original Russian bulb,
yes, very expensive for a light bulb!
>> However, looks like these are single mode bulbs, you can order as landing
or as taxi light, but not a combined one with two modes.
>>
>> I will first try to pursue the other suggestion on this list, go to a tra
ctor supply shop and see if they have an equivalent 2 filament lamp. I assu
me this needs to be a tractor shop in the US, I'm in France and don't know i
f they have tractor shops here??
>> If I find it, I'll let you know.
>>
>> Thanks
>>
>> Michael Wikstr=C3=B6m
>> France
>> Tel +33 493 95 80 93
>> Tel +33 607 44 40 11
>>
>> > On 25 Jul 2016, at 05:27, Walter Lannon <wlannon@shaw.ca> wrote:
>> >
>> >
>> > Mark;
>> >
>> > Even better {IMHO) the Teledyne Alphabeam Par 36. But even more expens
ive!
>> >
>> > Cheers;
>> > Walt
>> >
>> > -----Original Message----- From: Bitterlich, Mark G CIV NAVAIR, WD
>> > Sent: Sunday, July 24, 2016 3:32 PM
>> > To: yak-list@matronics.com
>> > Subject: RE: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak 1
8T
>> >
rk.bitterlich@navy.mil>
>> >
>> > Whelen Parmetheus P36P NOT CHEAP, but does exactly what you want.
>> >
>> >
>> >
>> >
>> >
>> > ________________________________
>> > From: owner-yak-list-server@matronics.com [owner-yak-list-server@matron
ics.com] on behalf of Michael Wikstrom [michael@wikstrom.cc]
>> > Sent: Sunday, July 24, 2016 1:57 PM
>> > To: yak-list@matronics.com
>> > Subject: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak 18T
>> >
>> > Thanks, but,
>> > the bulb that I want to replace has two filaments, one for landing and o
ne for taxi and I doubt I can get an equivalent Led version??
>> >
>> > I'll take dimensions and post a picture, maybe the same as for the CJ6?
>> >
>> > Thanks
>> > Michael Wikstr=C3=B6m [iPhone]
>> >
>> > Marine Satellite Systems
>> > Les Espaces de Sophia
>> > 80 Route des Lucioles
>> > 06560 Valbonne
>> > France
>> >
>> > Tel: +33 493 958 093
>> > Gsm: +33 607 44 40 11
>> > Fax: +33 493 958 042
>> >
>> > Email: michael@mssfrance.com<mailto:michael@mssfrance.com>
>> > Web: www.mssfrance.com<http://www.mssfrance.com/>
>> > VAT No: FR69347398729
>> >
>> >
>> > On 24 Jul 2016, at 13:47, George Coy <george.coy@gmail.com<mailto:georg
e.coy@gmail.com>> wrote:
>> >
>> > Or you can buy one of the standard LED bulbs and with the aid of some R
TV fix it in the existing reflector and be done with the problem ( better li
ghting as well).
>> >
>> >
>> > Sent from my iPad
>> >
>> > On Jul 24, 2016, at 6:26 AM, A. Dennis Savarese <dsavarese0812@bellsout
h.net<mailto:dsavarese0812@bellsouth.net>> wrote:
>> >
>> > Remove the bulb and take a photo of it and measure the diameter of the e
lectrical connection. Then email the information to Doug Sapp our CJ6 parts
guru. dougsappllc@gmail.com<mailto:dougsappllc@gmail.com> It may be the s
ame as the CJ's landing/taxi light bulb.
>> > Dennis
>> >
>> >
>> > ________________________________
>> > From: Michael Wikstrom <michael@wikstrom.cc<mailto:michael@wikstrom.cc>
>
>> > To: yak-list@matronics.com<mailto:yak-list@matronics.com>
>> > Sent: Sunday, July 24, 2016 3:11 AM
>> > Subject: Yak-List: Taxi/Landing light for Yak 18T
>> >
ailto:michael@wikstrom.cc>>
>> >
>> > Hi
>> > I'm looking for the light bulb for the Taxi/Landing light on my 18T, lo
cated on the left wing.
>> > Does anyone have one or know where I can get one?
>> >
>> > Thanks
>> >
>> > Michael Wikstr=C3=B6m//www.matronics.com/Navigator?Yak-List<http://www.
matronics.com/Navigator?Yak-List>" target="_blank">http://www.matronp<http
://www.matronp/>; &nhttp://=================
======
>> >
>> >
>> >
>> >
>> >
>> > <http://www.matronics.com/contribution>
>> > <http://www.matronics.com/contribution>
>> > <http://www.matronics.com/contribution>
>> > <http://www.matronics.com/contribution>
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>> ==========
>> List" rel="noreferrer" target="_blank">http://www.matronics.com/Navig
ator?Yak-List
>> ==========
>> FORUMS -
>> eferrer" target="_blank">http://forums.matronics.com
>> ==========
>> WIKI -
>> errer" target="_blank">http://wiki.matronics.com
>> ==========
>> b Site -
>> -Matt Dralle, List Admin.
>> rel="noreferrer" target="_blank">http://www.matronics.com/contributio
n
>> ==========
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Taxi/Landing light for Yak 18T |
Oui, c'=C3=A9tait le mien. Bas=C3=A9 =C3- Feurs- Chambeon pr=C3=A8s de St
=C3=89tienne.
Ce serait super d'organiser une rencontre Yak en France?.
Le 26 juil. 2016 13:09, "Michael Wikstrom" <michael@wikstrom.cc> a =C3=A9cr
it :
> Yes, and I saw a G registered yak 52 when I was there recently, assume
> that was yours.
> Where is yours based? Mine is in Cannes
>
> Michael Wikstr=C3=B6m [iPhone]
>
> Marine Satellite Systems
> Les Espaces de Sophia
> 80 Route des Lucioles
> 06560 Valbonne
> France
>
> Tel: +33 493 958 093
> Gsm: +33 607 44 40 11
> Fax: +33 493 958 042
>
> Email: michael@mssfrance.com
> Web: www.mssfrance.com
> VAT No: FR69347398729
>
>
> On 26 Jul 2016, at 08:54, Jean-Philippe Martel <marty.jpm@gmail.com>
> wrote:
>
> Hi Michael,
>
> I also live in France and fly a Yak 52. For sure, there are shops/dealer
s
> for tractors in our beautiful country.
>
> By the way, few days ago, I saw a Yak 18 at Bruno Ducreux's workshop in
> Darois. Was it yours?
>
> Best regards,
>
> Jean-Philippe MARTEL
> G-YYAK
> Le 25 juil. 2016 23:29, "Michael Wikstrom" <michael@wikstrom.cc> a =C3=A9
crit :
>
>>
>> Thanks Mark & Walt & Michael Ali-Paz
>> Both these bulbs cost approximately the same as an original Russian bulb
,
>> yes, very expensive for a light bulb!
>> However, looks like these are single mode bulbs, you can order as landin
g
>> or as taxi light, but not a combined one with two modes.
>>
>> I will first try to pursue the other suggestion on this list, go to a
>> tractor supply shop and see if they have an equivalent 2 filament lamp.
I
>> assume this needs to be a tractor shop in the US, I'm in France and don'
t
>> know if they have tractor shops here??
>> If I find it, I'll let you know.
>>
>> Thanks
>>
>> Michael Wikstr=C3=B6m
>> France
>> Tel +33 493 95 80 93
>> Tel +33 607 44 40 11
>>
>> > On 25 Jul 2016, at 05:27, Walter Lannon <wlannon@shaw.ca> wrote:
>> >
>> >
>> > Mark;
>> >
>> > Even better {IMHO) the Teledyne Alphabeam Par 36. But even more
>> expensive!
>> >
>> > Cheers;
>> > Walt
>> >
>> > -----Original Message----- From: Bitterlich, Mark G CIV NAVAIR, WD
>> > Sent: Sunday, July 24, 2016 3:32 PM
>> > To: yak-list@matronics.com
>> > Subject: RE: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak
>> 18T
>> >
>> mark.bitterlich@navy.mil>
>> >
>> > Whelen Parmetheus P36P NOT CHEAP, but does exactly what you want.
>> >
>> >
>> >
>> >
>> >
>> > ________________________________
>> > From: owner-yak-list-server@matronics.com [
>> owner-yak-list-server@matronics.com] on behalf of Michael Wikstrom [
>> michael@wikstrom.cc]
>> > Sent: Sunday, July 24, 2016 1:57 PM
>> > To: yak-list@matronics.com
>> > Subject: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak 18T
>> >
>> > Thanks, but,
>> > the bulb that I want to replace has two filaments, one for landing and
>> one for taxi and I doubt I can get an equivalent Led version??
>> >
>> > I'll take dimensions and post a picture, maybe the same as for the CJ6
?
>> >
>> > Thanks
>> > Michael Wikstr=C3=B6m [iPhone]
>> >
>> > Marine Satellite Systems
>> > Les Espaces de Sophia
>> > 80 Route des Lucioles
>> > 06560 Valbonne
>> > France
>> >
>> > Tel: +33 493 958 093
>> > Gsm: +33 607 44 40 11
>> > Fax: +33 493 958 042
>> >
>> > Email: michael@mssfrance.com<mailto:michael@mssfrance.com>
>> > Web: www.mssfrance.com<http://www.mssfrance.com/>
>> > VAT No: FR69347398729
>> >
>> >
>> > On 24 Jul 2016, at 13:47, George Coy <george.coy@gmail.com<mailto:
>> george.coy@gmail.com>> wrote:
>> >
>> > Or you can buy one of the standard LED bulbs and with the aid of some
>> RTV fix it in the existing reflector and be done with the problem ( bett
er
>> lighting as well).
>> >
>> >
>> > Sent from my iPad
>> >
>> > On Jul 24, 2016, at 6:26 AM, A. Dennis Savarese <
>> dsavarese0812@bellsouth.net<mailto:dsavarese0812@bellsouth.net>> wrote:
>> >
>> > Remove the bulb and take a photo of it and measure the diameter of the
>> electrical connection. Then email the information to Doug Sapp our CJ6
>> parts guru. dougsappllc@gmail.com<mailto:dougsappllc@gmail.com> It may
>> be the same as the CJ's landing/taxi light bulb.
>> > Dennis
>> >
>> >
>> > ________________________________
>> > From: Michael Wikstrom <michael@wikstrom.cc<mailto:michael@wikstrom.cc
>> >>
>> > To: yak-list@matronics.com<mailto:yak-list@matronics.com>
>> > Sent: Sunday, July 24, 2016 3:11 AM
>> > Subject: Yak-List: Taxi/Landing light for Yak 18T
>> >
>> <mailto:michael@wikstrom.cc>>
>> >
>> > Hi
>> > I'm looking for the light bulb for the Taxi/Landing light on my 18T,
>> located on the left wing.
>> > Does anyone have one or know where I can get one?
>> >
>> > Thanks
>> >
>> > Michael Wikstr=C3=B6m//www.matronics.com/Navigator?Yak-List<
>> http://www.matronics.com/Navigator?Yak-List>" target="_blank">
>> http://www.matronp<http://www.matronp/>;
>> &nhttp://=====================
==
>> >
>> >
>> >
>> >
>> >
>> > <http://www.matronics.com/contribution>
>> > <http://www.matronics.com/contribution>
>> > <http://www.matronics.com/contribution>
>> > <http://www.matronics.com/contribution>
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>> ==========
>> List" rel="noreferrer" target="_blank">
>> http://www.matronics.com/Navigator?Yak-List
>> ==========
>> FORUMS -
>> eferrer" target="_blank">http://forums.matronics.com
>> ==========
>> WIKI -
>> errer" target="_blank">http://wiki.matronics.com
>> ==========
>> b Site -
>> -Matt Dralle, List Admin.
>> rel="noreferrer" target="_blank">http://www.matronics.com/contributi
on
>> ==========
>>
>>
>>
>>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Anybody have a source for replacement instrument panels for the CJ?
I would like to cut one for the front seat of my plane.
Jon
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: CJ Panel Blank |
Doug Sapp had these.=C2-
Sent from Yahoo Mail on Android
On Tue, Jul 26, 2016 at 17:21, Jon Boede<jonboede@hotmail.com> wrote: -
Anybody have a source for replacement instrument panels for the CJ?
I would like to cut one for the front seat of my plane.
Jon
S -
WIKI -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Propell Counterwight torque value |
Hi Havard;
Meant to send you some numbers yesterday but not sure which aircraft you
have and did not want to give you wrong info.
So; will assume you have a YAK 52 with the M14P and the stock V530 prop.
The counterweight/clamp assembly for all variants of this hub consists
of two parts. One is the actual weight the other is the arm to which
the weight is attached. In earlier versions of this hub (CJ6, Wiiga,
etc.) the weight is attached by a 10mm bolt with a 17mm (wrench size)
nut and is referred to as the counterweight bolt.
On the M14P the weight appears permanently attached to the arm with no
bolt.
If my assumption is correct then you are referring to the =9Cclamp
bolt=9D which also takes a 17mm wrench. The torque value for
this bolt is given as
78 to 88 NM (680 to 780 Lb/In.) for the Chinese and Polish props.
Caution Note: I would expect this to be the same for the M14P version
but cannot confirm that. Perhaps George Coy could advise further.
Best;
Walt
From: H=C3=A5vard Dale
Sent: Monday, July 25, 2016 5:56 AM
Subject: Yak-List: Propell Counterwight torque value
Hi
Anyone having the torque value for the 17mm nut on the propell
counterweight=C2=B4s?
Best Regards,
Havard
2016-07-25 9:03 GMT+02:00 Yak-List Digest Server
<yak-list@matronics.com>:
*
Online Versions of Today's List Digest Archive
Today's complete Yak-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest
formatted
in HTML for viewing with a web browser and features Hyperlinked
Indexes
and Message Navigation. The .txt file includes the plain ASCII
version
of the Yak-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&
Chapter 16-07-24&Archive=Yak
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&C
hapter 16-07-24&Archive=Yak
======================
EMail Version of Today's List Digest Archive
======================
----------------------------------------------------------
Yak-List Digest Archive
---
Total Messages Posted Sun 07/24/16: 9
----------------------------------------------------------
Today's Message Index:
----------------------
1. 12:15 AM - Taxi/Landing light for Yak 18T (Michael Wikstrom)
2. 03:30 AM - Re: Taxi/Landing light for Yak 18T (A. Dennis
Savarese)
3. 04:49 AM - Re: Taxi/Landing light for Yak 18T (George Coy)
4. 05:04 AM - Re: Oshkosh Next (Jon Blake)
5. 10:58 AM - Re: Taxi/Landing light for Yak 18T (Michael
Wikstrom)
6. 01:38 PM - Re: Taxi/Landing light for Yak 18T (Vic)
7. 02:32 PM - Re: Taxi/Landing light for Yak 18T (L129bs)
8. 03:38 PM - Re: [Non-DoD Source] Re: Taxi/Landing light for Yak
18T (Bitterlich, Mark G CIV NAVAIR, WD)
9. 08:31 PM - Re: [Non-DoD Source] Re: Taxi/Landing light for Yak
18T (Walter Lannon)
________________________________ Message 1
_____________________________________
Time: 12:15:30 AM PST US
Subject: Yak-List: Taxi/Landing light for Yak 18T
From: Michael Wikstrom <michael@wikstrom.cc>
Hi
I'm looking for the light bulb for the Taxi/Landing light on my 18T,
located on
the left wing.
Does anyone have one or know where I can get one?
Thanks
Michael Wikstrm
France
Tel +33 493 95 80 93
Tel +33 607 44 40 11
________________________________ Message 2
_____________________________________
Time: 03:30:21 AM PST US
From: "A. Dennis Savarese" <dsavarese0812@bellsouth.net>
Subject: Re: Yak-List: Taxi/Landing light for Yak 18T
Remove the bulb and take a photo of it and measure the diameter of the
elec
trical connection.=C2- Then email the information to Doug Sapp our
CJ6 pa
rts guru. dougsappllc@gmail.com =C2- It may be the same as the CJ's
landi
ng/taxi light bulb.Dennis
From: Michael Wikstrom <michael@wikstrom.cc>
To: yak-list@matronics.com
Sent: Sunday, July 24, 2016 3:11 AM
Subject: Yak-List: Taxi/Landing light for Yak 18T
Hi
I'm looking for the light bulb for the Taxi/Landing light on my 18T,
locate
d on the left wing.
Does anyone have one or know where I can get one?
Thanks
Michael Wikstr=C3=B6m
France
Tel +33 493 95 80 93
Tel +33 607 44 40 11
S -
WIKI -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
________________________________ Message 3
_____________________________________
Time: 04:49:32 AM PST US
From: George Coy <george.coy@gmail.com>
Subject: Re: Yak-List: Taxi/Landing light for Yak 18T
Or you can buy one of the standard LED bulbs and with the aid of some
RTV fi
x it in the existing reflector and be done with the problem ( better
lightin
g as well).
Sent from my iPad
> On Jul 24, 2016, at 6:26 AM, A. Dennis Savarese
<dsavarese0812@bellsouth.n
et> wrote:
>
> Remove the bulb and take a photo of it and measure the diameter of
the ele
ctrical connection. Then email the information to Doug Sapp our CJ6
parts g
uru. dougsappllc@gmail.com It may be the same as the CJ's
landing/taxi lig
ht bulb.
> Dennis
>
>
> From: Michael Wikstrom <michael@wikstrom.cc>
> To: yak-list@matronics.com
> Sent: Sunday, July 24, 2016 3:11 AM
> Subject: Yak-List: Taxi/Landing light for Yak 18T
>
>
> Hi
> I'm looking for the light bulb for the Taxi/Landing light on my 18T,
locat
ed on the left wing.
> Does anyone have one or know where I can get one?
>
> Thanks
>
> Michael Wikstr=C3=B6m//www.matronics.com/Navigator?Yak-List"
target="_bl
ank">http://www.matronp;
&nhttp://=======
==============
>
>
>
>
>
________________________________ Message 4
_____________________________________
Time: 05:04:24 AM PST US
Subject: Re: Yak-List: Oshkosh Next
From: Jon Blake <jblake207@comcast.net>
U2VlIHlvdSB0aGVyZSBDcmFpZy4gSkIKClNlbnQgZnJvbSBteSBWZXJpem9uIFdpcmVsZXNzI
DRH
IExURSBEUk9JRAoKQ3JhaWcgUGF5bmUgPHlha21hbjI4NUBnbWFpbC5jb20+IHdyb3RlOgoKP
khl
YWRlZCB0byBLT1NIIC4gSSdkIGxpa2UgdG8gbWVldCBteSBjdXN0b21lcnMgdGhhdCBJIGhhd
mUg
bm90IG1ldCB5ZXQgd2hvIG1pZ2h0IGFsc28gYmUgY29taW5nLiBCcmluZ2luZyBhIHNlbGVjd
Glv
biBvZiBteSBnb29kaWVzIHN1Y2ggYXMgdGhlIE0tMTRQIEdlYXJjYXNlIHdpbmRvdyBtb2QuI
EJy
aW5naW5nIE1hZ25ldG8gdG9vbHMgYXMgd2VsbCwgZXRjLgo+Cj5DcmFpZyBQYXluZQo+Cj44N
jMt
NjYwLTg2MTMgQ2VsbAo+Cg
________________________________ Message 5
_____________________________________
Time: 10:58:42 AM PST US
From: Michael Wikstrom <michael@wikstrom.cc>
Subject: Re: Yak-List: Taxi/Landing light for Yak 18T
Thanks, but,
the bulb that I want to replace has two filaments, one for landing and
one f
or taxi and I doubt I can get an equivalent Led version??
I'll take dimensions and post a picture, maybe the same as for the
CJ6?
Thanks
Michael Wikstr=C3=B6m [iPhone]
Marine Satellite Systems
Les Espaces de Sophia
80 Route des Lucioles
06560 Valbonne
France
Tel: +33 493 958 093
Gsm: +33 607 44 40 11
Fax: +33 493 958 042
Email: michael@mssfrance.com
Web: www.mssfrance.com
VAT No: FR69347398729
> On 24 Jul 2016, at 13:47, George Coy <george.coy@gmail.com> wrote:
>
> Or you can buy one of the standard LED bulbs and with the aid of
some RTV f
ix it in the existing reflector and be done with the problem ( better
lighti
ng as well).
>
>
> Sent from my iPad
>
>> On Jul 24, 2016, at 6:26 AM, A. Dennis Savarese
<dsavarese0812@bellsouth.
net> wrote:
>>
>> Remove the bulb and take a photo of it and measure the diameter of
the el
ectrical connection. Then email the information to Doug Sapp our CJ6
parts g
uru. dougsappllc@gmail.com It may be the same as the CJ's
landing/taxi lig
ht bulb.
>> Dennis
>>
>>
>> From: Michael Wikstrom <michael@wikstrom.cc>
>> To: yak-list@matronics.com
>> Sent: Sunday, July 24, 2016 3:11 AM
>> Subject: Yak-List: Taxi/Landing light for Yak 18T
>>
>>
>> Hi
>> I'm looking for the light bulb for the Taxi/Landing light on my
18T, loca
ted on the left wing.
>> Does anyone have one or know where I can get one?
>>
>> Thanks
>>
>> Michael Wikstr=C3=B6m//www.matronics.com/Navigator?Yak-List"
target="_b
lank">http://www.matronp;
&nhttp://======
===============
>>
>>
>>
>>
>>
________________________________ Message 6
_____________________________________
Time: 01:38:48 PM PST US
Subject: Yak-List: Re: Taxi/Landing light for Yak 18T
From: "Vic" <vicmolnar@aol.com>
Hi Michael,
how are you ? You could fit various lamps, the diameter is 160mm I
believe, but
you have to check this. We had a standard H 4 there but as we dont
need a taxi
light at all I have fitted a HID bulb in a search light lamp for anti
collision
purpose permanently on. Unfortunately it is mounted too dipped to be
really
effective at that so I will have to go at it once more. Our inspectors
dont
care much about it, so far, certified or not.
Vic
http://www.ebay.fr/sch/i.html?_odkw=hid+h1+55w&_osacat=0&_from=R40&
_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xhid+h1+24+v.TRS0&_nkw=hid+h1
+24+v&_sacat=0
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=458634#458634
________________________________ Message 7
_____________________________________
Time: 02:32:13 PM PST US
From: L129bs <l129bs@gmail.com>
Subject: Re: Yak-List: Taxi/Landing light for Yak 18T
U21hcnQgYW5zd2VyIGFuZCBiZXN0IGlkZWEuLi4gRG9uJ3QgZmx5IHdoZW4gdSBuZWVkIGxpZ
2h0
cy4KSnVzdCBhIHRob3VnaHQuCgpTZW50IGZyb20gbXkgU2Ftc3VuZyBHYWxheHkgc21hcnRwa
G9u
ZS4KCi0tLS0tLS0tIE9yaWdpbmFsIG1lc3NhZ2UgLS0tLS0tLS0KRnJvbTogTWljaGFlbCBXa
Wtz
dHJvbSA8bWljaGFlbEB3aWtzdHJvbS5jYz4gCkRhdGU6MDcvMjQvMjAxNiAgMTE6NTcgIChHT
VQt
MDc6MDApIApUbzogeWFrLWxpc3RAbWF0cm9uaWNzLmNvbSAKQ2M6ICAKU3ViamVjdDogUmU6I
Flh
ay1MaXN0OiBUYXhpL0xhbmRpbmcgbGlnaHQgZm9yIFlhayAxOFQgCgpUaGFua3MsIGJ1dCx0a
GUg
YnVsYiB0aGF0IEkgd2FudCB0byByZXBsYWNlIGhhcyB0d28gZmlsYW1lbnRzLCBvbmUgZm9yI
Gxh
bmRpbmcgYW5kIG9uZSBmb3IgdGF4aSBhbmQgSSBkb3VidCBJIGNhbiBnZXQgYW4gZXF1aXZhb
GVu
dCBMZWQgdmVyc2lvbj8/SSdsbCB0YWtlIGRpbWVuc2lvbnMgYW5kIHBvc3QgYSBwaWN0dXJlL
CBt
YXliZSB0aGUgc2FtZSBhcyBmb3IgdGhlIENKNj9UaGFua3NNaWNoYWVsIFdpa3N0csO2bSBba
VBo
b25lXU1hcmluZSBTYXRlbGxpdGUgU3lzdGVtc0xlcyBFc3BhY2VzIGRlIFNvcGhpYTgwIFJvd
XRl
IGRlcyBMdWNpb2xlczA2NTYwIFZhbGJvbm5lRnJhbmNlIFRlbDogKzMzIDQ5MyA5NTggMDkzR
3Nt
OiArMzMgNjA3IDQ0IDQwIDExIEZheDogKzMzIDQ5MyA5NTggMDQyRW1haWw6IG1pY2hhZWxAb
XNz
ZnJhbmNlLmNvbVdlYjogd3d3Lm1zc2ZyYW5jZS5jb21WQVQgTm86IEZSNjkzNDczOTg3MjlPb
iAy
NCBKdWwgMjAxNiwgYXQgMTM6NDcsIEdlb3JnZSBDb3kgPGdlb3JnZS5jb3lAZ21haWwuY29tP
iB3
cm90ZTpPciB5b3UgY2FuIGJ1eSBvbmUgb2YgdGhlIHN0YW5kYXJkIExFRCBidWxicyBhbmQgd
2l0
aCB0aGUgYWlkIG9mIHNvbWUgUlRWIGZpeCBpdCBpbiB0aGUgZXhpc3RpbmcgcmVmbGVjdG9yI
GFu
ZCBiZSBkb25lIHdpdGggdGhlIHByb2JsZW0gKCBiZXR0ZXIgbGlnaHRpbmcgYXMgd2VsbCkuU
2Vu
dCBmcm9tIG15IGlQYWRPbiBKdWwgMjQsIDIwMTYsIGF0IDY6MjYgQU0sIEEuIERlbm5pcyBTY
XZh
cmVzZSA8ZHNhdmFyZXNlMDgxMkBiZWxsc291dGgubmV0PiB3cm90ZTpSZW1vdmUgdGhlIGJ1b
GIg
YW5kIHRha2UgYSBwaG90byBvZiBpdCBhbmQgbWVhc3VyZSB0aGUgZGlhbWV0ZXIgb2YgdGhlI
GVs
ZWN0cmljYWwgY29ubmVjdGlvbi4gVGhlbiBlbWFpbCB0aGUgaW5mb3JtYXRpb24gdG8gRG91Z
yBT
YXBwIG91ciBDSjYgcGFydHMgZ3VydS4gZG91Z3NhcHBsbGNAZ21haWwuY29tIEl0IG1heSBiZ
SB0
aGUgc2FtZSBhcyB0aGUgQ0oncyBsYW5kaW5nL3RheGkgbGlnaHQgYnVsYi5EZW5uaXMgRnJvb
Tog
TWljaGFlbCBXaWtzdHJvbSA8bWljaGFlbEB3aWtzdHJvbS5jYz4gVG86IHlhay1saXN0QG1hd
HJv
bmljcy5jb20gU2VudDogU3VuZGF5LCBKdWx5IDI0LCAyMDE2IDM6MTEgQU0gU3ViamVjdDogW
WFr
LUxpc3Q6IFRheGkvTGFuZGluZyBsaWdodCBmb3IgWWFrIDE4VCAtPiBZYWstTGlzdCBtZXNzY
Wdl
IHBvc3RlZCBieTogTWljaGFlbCBXaWtzdHJvbSA8bWljaGFlbEB3aWtzdHJvbS5jYz5IaUknb
SBs
b29raW5nIGZvciB0aGUgbGlnaHQgYnVsYiBmb3IgdGhlIFRheGkvTGFuZGluZyBsaWdodCBvb
iBt
eSAxOFQsIGxvY2F0ZWQgb24gdGhlIGxlZnQgd2luZy5Eb2VzIGFueW9uZSBoYXZlIG9uZSBvc
iBr
bm93IHdoZXJlIEkgY2FuIGdldCBvbmU/VGhhbmtzTWljaGFlbCBXaWtzdHLDtm0vL3d3dy5tY
XRy
b25pY3MuY29tL05hdmlnYXRvcj9ZYWstTGlzdCIgdGFyZ2V0PSJfYmxhbmsiPmh0dHA6Ly93d
3cu
bWF0cm9ucDsgJm5odHRwOi8vPQ
________________________________ Message 8
_____________________________________
Time: 03:38:23 PM PST US
From: "Bitterlich, Mark G CIV NAVAIR, WD" <mark.bitterlich@navy.mil>
Subject: RE: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak
18T
Whelen Parmetheus P36P NOT CHEAP, but does exactly what you want.
________________________________
From: owner-yak-list-server@matronics.com
[owner-yak-list-server@matronics.com]
on behalf of Michael Wikstrom [michael@wikstrom.cc]
Sent: Sunday, July 24, 2016 1:57 PM
Subject: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak 18T
Thanks, but,
the bulb that I want to replace has two filaments, one for landing and
one for
taxi and I doubt I can get an equivalent Led version??
I'll take dimensions and post a picture, maybe the same as for the
CJ6?
Thanks
Michael Wikstrm [iPhone]
Marine Satellite Systems
Les Espaces de Sophia
80 Route des Lucioles
06560 Valbonne
France
Tel: +33 493 958 093
Gsm: +33 607 44 40 11
Fax: +33 493 958 042
Email: michael@mssfrance.com<mailto:michael@mssfrance.com>
Web: www.mssfrance.com<http://www.mssfrance.com/>
VAT No: FR69347398729
On 24 Jul 2016, at 13:47, George Coy
<george.coy@gmail.com<mailto:george.coy@gmail.com>> wrote:
Or you can buy one of the standard LED bulbs and with the aid of some
RTV fix it
in the existing reflector and be done with the problem ( better
lighting as
well).
Sent from my iPad
On Jul 24, 2016, at 6:26 AM, A. Dennis Savarese
<dsavarese0812@bellsouth.net<mailto:dsavarese0812@bellsouth.net>> wrote:
Remove the bulb and take a photo of it and measure the diameter of the
electrical connection. Then email the information to Doug Sapp our CJ6
parts guru. dougsappllc@gmail.com<mailto:dougsappllc@gmail.com> It may
be the same as the CJ's landing/taxi light bulb.
Dennis
________________________________
From: Michael Wikstrom
<michael@wikstrom.cc<mailto:michael@wikstrom.cc>>
Sent: Sunday, July 24, 2016 3:11 AM
Subject: Yak-List: Taxi/Landing light for Yak 18T
Hi
I'm looking for the light bulb for the Taxi/Landing light on my 18T,
located on
the left wing.
Does anyone have one or know where I can get one?
Thanks
Michael
Wikstrm//www.matronics.com/Navigator?Yak-List<http://www.matronics.com/Na
vigator?Yak-List>"
target="_blank">http://www.matronp<http://www.matronp/>;
&nhttp://======================
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
________________________________ Message 9
_____________________________________
Time: 08:31:42 PM PST US
From: "Walter Lannon" <wlannon@shaw.ca>
Subject: Re: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak
18T
Mark;
Even better {IMHO) the Teledyne Alphabeam Par 36. But even more
expensive!
Cheers;
Walt
-----Original Message-----
From: Bitterlich, Mark G CIV NAVAIR, WD
Sent: Sunday, July 24, 2016 3:32 PM
Subject: RE: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak
18T
<mark.bitterlich@navy.mil>
Whelen Parmetheus P36P NOT CHEAP, but does exactly what you want.
________________________________
From: owner-yak-list-server@matronics.com
[owner-yak-list-server@matronics.com] on behalf of Michael Wikstrom
[michael@wikstrom.cc]
Sent: Sunday, July 24, 2016 1:57 PM
Subject: [Non-DoD Source] Re: Yak-List: Taxi/Landing light for Yak 18T
Thanks, but,
the bulb that I want to replace has two filaments, one for landing and
one
for taxi and I doubt I can get an equivalent Led version??
I'll take dimensions and post a picture, maybe the same as for the
CJ6?
Thanks
Michael Wikstrm [iPhone]
Marine Satellite Systems
Les Espaces de Sophia
80 Route des Lucioles
06560 Valbonne
France
Tel: +33 493 958 093
Gsm: +33 607 44 40 11
Fax: +33 493 958 042
Email: michael@mssfrance.com<mailto:michael@mssfrance.com>
Web: www.mssfrance.com<http://www.mssfrance.com/>
VAT No: FR69347398729
On 24 Jul 2016, at 13:47, George Coy
<george.coy@gmail.com<mailto:george.coy@gmail.com>> wrote:
Or you can buy one of the standard LED bulbs and with the aid of some
RTV
fix it in the existing reflector and be done with the problem ( better
lighting as well).
Sent from my iPad
On Jul 24, 2016, at 6:26 AM, A. Dennis Savarese
<dsavarese0812@bellsouth.net<mailto:dsavarese0812@bellsouth.net>>
wrote:
Remove the bulb and take a photo of it and measure the diameter of the
electrical connection. Then email the information to Doug Sapp our
CJ6
parts guru. dougsappllc@gmail.com<mailto:dougsappllc@gmail.com> It
may be
the same as the CJ's landing/taxi light bulb.
Dennis
________________________________
From: Michael Wikstrom
<michael@wikstrom.cc<mailto:michael@wikstrom.cc>>
Sent: Sunday, July 24, 2016 3:11 AM
Subject: Yak-List: Taxi/Landing light for Yak 18T
<michael@wikstrom.cc<mailto:michael@wikstrom.cc>>
Hi
I'm looking for the light bulb for the Taxi/Landing light on my 18T,
located
on the left wing.
Does anyone have one or know where I can get one?
Thanks
Michael
Wikstrm//www.matronics.com/Navigator?Yak-List<http://www.matronics.com/Na
vigator?Yak-List>"
target="_blank">http://www.matronp<http://www.matronp/>;
&nhttp://======================
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
<http://www.matronics.com/contribution>
==========
List" rel="noreferrer"
target="_blank">http://www.matronics.com/Navigator?Yak-List
==========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
==========
WIKI -
errer" target="_blank">http://wiki.matronics.com
==========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer"
target="_blank">http://www.matronics.com/contribution
==========
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|