---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 10/04/16: 19 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:59 AM - Re: "Battery On" light rear cockpit (Rob Rowe) 2. 04:06 AM - Russian clock with electrical connectors (Jan Mevis) 3. 04:11 AM - Re: Russian clock with electrical connectors (Didier Blouzard) 4. 04:12 AM - Re: Russian clock with electrical connectors (Didier Blouzard) 5. 04:38 AM - Re: Russian clock with electrical connectors (A. Dennis Savarese) 6. 04:46 AM - Re: Russian clock with electrical connectors (Vic) 7. 04:51 AM - Re: Russian clock with electrical connectors (Jan Mevis) 8. 04:54 AM - Re: Russian clock with electrical connectors (George Coy) 9. 05:13 AM - Re: Russian clock with electrical connectors (George Coy) 10. 05:13 AM - Re: Russian clock with electrical connectors (Richard Goode) 11. 05:14 AM - Re: Russian clock with electrical connectors (Jan Mevis) 12. 05:42 AM - Re: Russian clock with electrical connectors (Justin Drafts) 13. 12:35 PM - Re: Russian clock with electrical connectors (Didier Blouzard) 14. 12:40 PM - Re: Russian clock with electrical connectors (Chris & Diane Burton) 15. 03:28 PM - Re: Russian clock with electrical connectors (Al Pickering) 16. 06:24 PM - Re: Russian clock with electrical connectors (Justin Drafts) 17. 11:08 PM - Re: Russian clock with electrical connectors (Jan Mevis) 18. 11:38 PM - Re: Russian clock with electrical connectors (Chris & Diane Burton) 19. 11:54 PM - Re: Russian clock with electrical connectors (Jan Mevis) ________________________________ Message 1 _____________________________________ Time: 02:59:52 AM PST US Subject: Yak-List: Re: "Battery On" light rear cockpit From: "Rob Rowe" Presume you're describing the -52 REAR annunciator panel 'Battery On' green light ... being a training aircraft this just informs the rear seat instructor that the front seat student has the master power switch turned on. Hence it should be on the whole time you're operational, if you don't see it illuminated then that's the time to be concerned. It's one of those hidden in plain sight lights, the ones you never notice till something else is 'off-normal' :-) Only other annunciator green lights (replicated in both cockpits) are for the Stall Warning Heat On (if fitted) and Pitot Heat On - self-explanatory as to their function. Rob R. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=460921#460921 ________________________________ Message 2 _____________________________________ Time: 04:06:13 AM PST US Subject: Yak-List: Russian clock with electrical connectors From: Jan Mevis I had to remove the clock from my Yak 50 for repair. Then I noticed that it has two connectors for +27 v on the backside (as stated on the clock). This is obviously not used on the Yak 50. Does anyone know what the purpose is? Regards, Jan Yak 50 ________________________________ Message 3 _____________________________________ Time: 04:11:31 AM PST US From: Didier Blouzard Subject: Re: Yak-List: Russian clock with electrical connectors Light or de icing? 2016-10-04 13:05 GMT+02:00 Jan Mevis : > I had to remove the clock from my Yak 50 for repair. > Then I noticed that it has two connectors for +27 v on the backside (as > stated on the clock). > This is obviously not used on the Yak 50. > Does anyone know what the purpose is? > > Regards, > > Jan > Yak 50 > -- ____________________________ Didier BLOUZARD Directeur G=C3=A9n=C3=A9ral DATEXIS Portable : +33 6 51 84 48 02 Email: didier.blouzard@gmail.com ________________________________ Message 4 _____________________________________ Time: 04:12:21 AM PST US From: Didier Blouzard Subject: Re: Yak-List: Russian clock with electrical connectors Same clock is sitting on my desk in my boffice right in front of me, indeed two connectors 27v 2016-10-04 13:05 GMT+02:00 Jan Mevis : > I had to remove the clock from my Yak 50 for repair. > Then I noticed that it has two connectors for +27 v on the backside (as > stated on the clock). > This is obviously not used on the Yak 50. > Does anyone know what the purpose is? > > Regards, > > Jan > Yak 50 > -- ____________________________ Didier BLOUZARD Directeur G=C3=A9n=C3=A9ral DATEXIS Portable : +33 6 51 84 48 02 Email: didier.blouzard@gmail.com ________________________________ Message 5 _____________________________________ Time: 04:38:48 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Russian clock with electrical connectors If I remember correctly, the Russian clocks were connected to the pitot hea t circuit.=C2- Thus if pitot heat was turned on, the internal clock heate r was turned on as well.Dennis From: Didier Blouzard To: "yak-list@matronics.com" Sent: Tuesday, October 4, 2016 7:11 AM Subject: Re: Yak-List: Russian clock with electrical connectors Same clock is sitting on my desk in my boffice right in front of me, indeed two connectors=C2-27v 2016-10-04 13:05 GMT+02:00 Jan Mevis : I had to remove the clock from my Yak 50 for repair.=C2-Then I noticed th at it has two connectors for +27 v on the backside (as stated on the clock) .This is obviously not used on the Yak 50.Does anyone know what the purpose is?=C2- Regards, JanYak 50 -- ____________________________ Didier BLOUZARD Directeur G=C3=A9n=C3=A9ral DATEXIS Portable : +33 6 51 84 48 02 Email: didier.blouzard@gmail.com ________________________________ Message 6 _____________________________________ Time: 04:46:09 AM PST US Subject: Yak-List: Re: Russian clock with electrical connectors From: "Vic" Yes, indeed internal heating for the clock. Vic Read this topic online here: http://forums.matronics.com/viewtopic.php?p=460927#460927 ________________________________ Message 7 _____________________________________ Time: 04:51:58 AM PST US Subject: Re: Yak-List: Russian clock with electrical connectors From: Jan Mevis Yes, that seems a very plausible explanation. Anyway, as far as I know, not used on the 50 (not on mine for certain) although we also have a pitot heater. Jan From: on behalf of "A. Dennis Savarese" Subject: Re: Yak-List: Russian clock with electrical connectors If I remember correctly, the Russian clocks were connected to the pitot hea t circuit. Thus if pitot heat was turned on, the internal clock heater was turned on as well. Dennis From: Didier Blouzard To: "yak-list@matronics.com" Sent: Tuesday, October 4, 2016 7:11 AM Subject: Re: Yak-List: Russian clock with electrical connectors Same clock is sitting on my desk in my boffice right in front of me, indeed two connectors 27v 2016-10-04 13:05 GMT+02:00 Jan Mevis : > I had to remove the clock from my Yak 50 for repair. > Then I noticed that it has two connectors for +27 v on the backside (as s tated > on the clock). > This is obviously not used on the Yak 50. > Does anyone know what the purpose is? > > Regards, > > Jan > Yak 50 -- ____________________________ Didier BLOUZARD Directeur G=E9n=E9ral DATEXIS Portable : +33 6 51 84 48 02 Email: didier.blouzard@gmail.com ________________________________ Message 8 _____________________________________ Time: 04:54:01 AM PST US From: George Coy Subject: Re: Yak-List: Russian clock with electrical connectors It was for heating the clock to maintain a constant temperature so that the c lock was more accurate George Coy Sent from my iPad > On Oct 4, 2016, at 7:10 AM, Didier Blouzard wr ote: > > Light or de icing? > > 2016-10-04 13:05 GMT+02:00 Jan Mevis : >> I had to remove the clock from my Yak 50 for repair. >> Then I noticed that it has two connectors for +27 v on the backside (as s tated on the clock). >> This is obviously not used on the Yak 50. >> Does anyone know what the purpose is? >> >> Regards, >> >> Jan >> Yak 50 > > > > -- > ____________________________ > Didier BLOUZARD > Directeur G=C3=A9n=C3=A9ral DATEXIS > Portable : +33 6 51 84 48 02 > Email: didier.blouzard@gmail.com ________________________________ Message 9 _____________________________________ Time: 05:13:40 AM PST US From: George Coy Subject: Re: Yak-List: Russian clock with electrical connectors Jan you must realize that the Russians pretty much use that clock and everyt hing that flies from your Yak 50 to spacecraft so I did a lot of different d uties. Being electrically heated was critical and some of those duties Georg e Sent from my iPad > On Oct 4, 2016, at 7:51 AM, Jan Mevis wrote: > > Yes, that seems a very plausible explanation. > Anyway, as far as I know, not used on the 50 (not on mine for certain) alt hough we also have a pitot heater. > > Jan > > From: on behalf of "A. Dennis Savare se" > Date: Tuesday 4 October 2016 at 13:37 > To: "yak-list@matronics.com" > Subject: Re: Yak-List: Russian clock with electrical connectors > > If I remember correctly, the Russian clocks were connected to the pitot he at circuit. Thus if pitot heat was turned on, the internal clock heater was turned on as well. > Dennis > > > From: Didier Blouzard > To: "yak-list@matronics.com" > Sent: Tuesday, October 4, 2016 7:11 AM > Subject: Re: Yak-List: Russian clock with electrical connectors > > Same clock is sitting on my desk in my boffice right in front of me, indee d two connectors > 27v > > 2016-10-04 13:05 GMT+02:00 Jan Mevis : > I had to remove the clock from my Yak 50 for repair. > Then I noticed that it has two connectors for +27 v on the backside (as st ated on the clock). > This is obviously not used on the Yak 50. > Does anyone know what the purpose is? > > Regards, > > Jan > Yak 50 > > > > -- > ____________________________ > Didier BLOUZARD > Directeur G=C3=A9n=C3=A9ral DATEXIS > Portable : +33 6 51 84 48 02 > Email: didier.blouzard@gmail.com > > ________________________________ Message 10 ____________________________________ Time: 05:13:41 AM PST US From: "Richard Goode" Subject: RE: Yak-List: Russian clock with electrical connectors Yes, that is absolutely correct. What puzzles me is that although beautifully made, these clocks are not that accurate, and, given that, I wonder whether keeping them warm makes any significant difference! Richard Goode From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis Savarese Sent: 04 October 2016 12:38 Subject: Re: Yak-List: Russian clock with electrical connectors If I remember correctly, the Russian clocks were connected to the pitot heat circuit. Thus if pitot heat was turned on, the internal clock heater was turned on as well. Dennis _____ From: Didier Blouzard > > Sent: Tuesday, October 4, 2016 7:11 AM Subject: Re: Yak-List: Russian clock with electrical connectors Same clock is sitting on my desk in my boffice right in front of me, indeed two connectors 27v 2016-10-04 13:05 GMT+02:00 Jan Mevis >: I had to remove the clock from my Yak 50 for repair. Then I noticed that it has two connectors for +27 v on the backside (as stated on the clock). This is obviously not used on the Yak 50. Does anyone know what the purpose is? Regards, Jan Yak 50 -- ____________________________ Didier BLOUZARD Directeur G=C3=A9n=C3=A9ral DATEXIS Portable : +33 6 51 84 48 02 Email: didier.blouzard@gmail.com -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ________________________________ Message 11 ____________________________________ Time: 05:14:13 AM PST US Subject: Re: Yak-List: Russian clock with electrical connectors From: Jan Mevis Thanks, that also explains why it=B9s not necessary on a Yak 50. Jan From: on behalf of George Coy Subject: Re: Yak-List: Russian clock with electrical connectors It was for heating the clock to maintain a constant temperature so that the clock was more accurate George Coy Sent from my iPad On Oct 4, 2016, at 7:10 AM, Didier Blouzard wrote: > Light or de icing? > > 2016-10-04 13:05 GMT+02:00 Jan Mevis : >> I had to remove the clock from my Yak 50 for repair. >> Then I noticed that it has two connectors for +27 v on the backside (as >> stated on the clock). >> This is obviously not used on the Yak 50. >> Does anyone know what the purpose is? >> >> Regards, >> >> Jan >> Yak 50 > > > > -- > ____________________________ > Didier BLOUZARD > Directeur G=E9n=E9ral DATEXIS > Portable : +33 6 51 84 48 02 > Email: didier.blouzard@gmail.com ________________________________ Message 12 ____________________________________ Time: 05:42:53 AM PST US From: Justin Drafts Subject: Re: Yak-List: Russian clock with electrical connectors Gents, while we're on the topic, I've never used my CJ6's Soviet clock all that much. I'm wondering what the red button/knob on the left does? Photo attached. (I see that depressing it flips a red flag to white in the top dial...) The silver knob on right is for on/off, but needed for winding by any chance? Or draws its power from the main a/c bus? Can anyone give me a quick tutorial on the clock's functions? Thanks- Justin/N280NC On Tue, Oct 4, 2016 at 8:10 AM, Richard Goode < Richard.goode@russianaeros.com> wrote: > Yes, that is absolutely correct. What puzzles me is that although > beautifully made, these clocks are not that accurate, and, given that, I > wonder whether keeping them warm makes any significant difference! > > > Richard Goode > > > *From:* owner-yak-list-server@matronics.com [mailto:owner-yak-list-server @ > matronics.com] *On Behalf Of *A. Dennis Savarese > *Sent:* 04 October 2016 12:38 > *To:* yak-list@matronics.com > *Subject:* Re: Yak-List: Russian clock with electrical connectors > > > If I remember correctly, the Russian clocks were connected to the pitot > heat circuit. Thus if pitot heat was turned on, the internal clock heate r > was turned on as well. > > Dennis > > > ------------------------------ > > *From:* Didier Blouzard > *To:* "yak-list@matronics.com" > *Sent:* Tuesday, October 4, 2016 7:11 AM > *Subject:* Re: Yak-List: Russian clock with electrical connectors > > > Same clock is sitting on my desk in my boffice right in front of me, > indeed two connectors > > 27v > > > 2016-10-04 13:05 GMT+02:00 Jan Mevis : > > I had to remove the clock from my Yak 50 for repair. > > Then I noticed that it has two connectors for +27 v on the backside (as > stated on the clock). > > This is obviously not used on the Yak 50. > > Does anyone know what the purpose is? > > > Regards, > > > Jan > > Yak 50 > > > -- > > > *____________________________Didier BLOUZARDDirecteur G=C3=A9n=C3=A9ral D ATEXIS*Portable > : +33 6 51 84 48 02 > Email: didier.blouzard@gmail.com > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* , and is > believed to be clean. > ________________________________ Message 13 ____________________________________ Time: 12:35:01 PM PST US From: Didier Blouzard Subject: Re: Yak-List: Russian clock with electrical connectors I have the notice. Left is total flight time and setting the time, right is leg time and stopping the watch. 2016-10-04 14:42 GMT+02:00 Justin Drafts : > Gents, while we're on the topic, I've never used my CJ6's Soviet clock al l > that much. I'm wondering what the red button/knob on the left does? Photo > attached. (I see that depressing it flips a red flag to white in the top > dial...) The silver knob on right is for on/off, but needed for winding b y > any chance? Or draws its power from the main a/c bus? > > Can anyone give me a quick tutorial on the clock's functions? > > Thanks- > > Justin/N280NC > > On Tue, Oct 4, 2016 at 8:10 AM, Richard Goode com> wrote: > >> Yes, that is absolutely correct. What puzzles me is that although >> beautifully made, these clocks are not that accurate, and, given that, I >> wonder whether keeping them warm makes any significant difference! >> >> >> >> Richard Goode >> >> >> >> *From:* owner-yak-list-server@matronics.com [mailto: >> owner-yak-list-server@matronics.com] *On Behalf Of *A. Dennis Savarese >> *Sent:* 04 October 2016 12:38 >> *To:* yak-list@matronics.com >> *Subject:* Re: Yak-List: Russian clock with electrical connectors >> >> >> >> If I remember correctly, the Russian clocks were connected to the pitot >> heat circuit. Thus if pitot heat was turned on, the internal clock heat er >> was turned on as well. >> >> Dennis >> >> >> ------------------------------ >> >> *From:* Didier Blouzard >> *To:* "yak-list@matronics.com" >> *Sent:* Tuesday, October 4, 2016 7:11 AM >> *Subject:* Re: Yak-List: Russian clock with electrical connectors >> >> >> >> Same clock is sitting on my desk in my boffice right in front of me, >> indeed two connectors >> >> 27v >> >> >> >> 2016-10-04 13:05 GMT+02:00 Jan Mevis : >> >> I had to remove the clock from my Yak 50 for repair. >> >> Then I noticed that it has two connectors for +27 v on the backside (as >> stated on the clock). >> >> This is obviously not used on the Yak 50. >> >> Does anyone know what the purpose is? >> >> >> >> Regards, >> >> >> >> Jan >> >> Yak 50 >> >> >> >> >> >> -- >> >> >> >> >> *____________________________Didier BLOUZARDDirecteur G=C3=A9n=C3=A9ral DATEXIS*Portable >> : +33 6 51 84 48 02 >> Email: didier.blouzard@gmail.com >> >> >> >> >> -- >> This message has been scanned for viruses and >> dangerous content by *MailScanner* , and >> is >> believed to be clean. >> > > -- ____________________________ Didier BLOUZARD Directeur G=C3=A9n=C3=A9ral DATEXIS Portable : +33 6 51 84 48 02 Email: didier.blouzard@gmail.com ________________________________ Message 14 ____________________________________ Time: 12:40:45 PM PST US From: Chris & Diane Burton Subject: Re: Yak-List: Russian clock with electrical connectors This might help you. Cheers Chris > On 5/10/2016, at 1:42 AM, Justin Drafts wrote: > > Gents, while we're on the topic, I've never used my CJ6's Soviet clock all that much. I'm wondering what the red button/knob on the left does? Photo attached. (I see that depressing it flips a red flag to white in the top dial...) The silver knob on right is for on/off, but needed for winding by any chance? Or draws its power from the main a/c bus? > > Can anyone give me a quick tutorial on the clock's functions? > > Thanks- > > Justin/N280NC > > On Tue, Oct 4, 2016 at 8:10 AM, Richard Goode > wrote: > Yes, that is absolutely correct. What puzzles me is that although beautifully made, these clocks are not that accurate, and, given that, I wonder whether keeping them warm makes any significant difference! > > > > Richard Goode > > > > From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com ] On Behalf Of A. Dennis Savarese > Sent: 04 October 2016 12:38 > To: yak-list@matronics.com > Subject: Re: Yak-List: Russian clock with electrical connectors > > > > If I remember correctly, the Russian clocks were connected to the pitot heat circuit. Thus if pitot heat was turned on, the internal clock heater was turned on as well. > > Dennis > > > > From: Didier Blouzard > > To: "yak-list@matronics.com " > > Sent: Tuesday, October 4, 2016 7:11 AM > Subject: Re: Yak-List: Russian clock with electrical connectors > > > > Same clock is sitting on my desk in my boffice right in front of me, indeed two connectors > > 27v > > > > 2016-10-04 13:05 GMT+02:00 Jan Mevis >: > > I had to remove the clock from my Yak 50 for repair. > > Then I noticed that it has two connectors for +27 v on the backside (as stated on the clock). > > This is obviously not used on the Yak 50. > > Does anyone know what the purpose is? > > > > Regards, > > > > Jan > > Yak 50 > > > > > > > -- > > ____________________________ > Didier BLOUZARD > Directeur G=C3=A9n=C3=A9ral DATEXIS > Portable : +33 6 51 84 48 02 > Email: didier.blouzard@gmail.com > > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner , and is > believed to be clean. > > > ________________________________ Message 15 ____________________________________ Time: 03:28:15 PM PST US From: Al Pickering Subject: Re: Yak-List: Russian clock with electrical connectors Y2xvY2sgaW5zdHJ1Y3Rpb25zDQoNCk9uIDUvMTAvMjAxNiA2OjMzIEFNLCBEaWRpZXIgQmxvdXph cmQgd3JvdGU6DQpJIGhhdmUgdGhlIG5vdGljZS4NCkxlZnQgaXMgdG90YWwgZmxpZ2h0IHRpbWUg YW5kIHNldHRpbmcgdGhlIHRpbWUsIHJpZ2h0IGlzIGxlZyB0aW1lIGFuZCBzdG9wcGluZyB0aGUg d2F0Y2guDQoNCjIwMTYtMTAtMDQgMTQ6NDIgR01UKzAyOjAwIEp1c3RpbiBEcmFmdHMgPGRyYWZ0 c2p1c3Q0MTdAZ21haWwuY29tPG1haWx0bzpkcmFmdHNqdXN0NDE3QGdtYWlsLmNvbT4+Og0KR2Vu dHMsIHdoaWxlIHdlJ3JlIG9uIHRoZSB0b3BpYywgSSd2ZSBuZXZlciB1c2VkIG15IENKNidzIFNv dmlldCBjbG9jayBhbGwgdGhhdCBtdWNoLiBJJ20gd29uZGVyaW5nIHdoYXQgdGhlIHJlZCBidXR0 b24va25vYiBvbiB0aGUgbGVmdCBkb2VzPyBQaG90byBhdHRhY2hlZC4gKEkgc2VlIHRoYXQgZGVw cmVzc2luZyBpdCBmbGlwcyBhIHJlZCBmbGFnIHRvIHdoaXRlIGluIHRoZSB0b3AgZGlhbC4uLikg VGhlIHNpbHZlciBrbm9iIG9uIHJpZ2h0IGlzIGZvciBvbi9vZmYsIGJ1dCBuZWVkZWQgZm9yIHdp bmRpbmcgYnkgYW55IGNoYW5jZT8gT3IgZHJhd3MgaXRzIHBvd2VyIGZyb20gdGhlIG1haW4gYS9j IGJ1cz8NCg0KQ2FuIGFueW9uZSBnaXZlIG1lIGEgcXVpY2sgdHV0b3JpYWwgb24gdGhlIGNsb2Nr J3MgZnVuY3Rpb25zPw0KDQpUaGFua3MtDQoNCkp1c3Rpbi9OMjgwTkMNCg0KT24gVHVlLCBPY3Qg NCwgMjAxNiBhdCA4OjEwIEFNLCBSaWNoYXJkIEdvb2RlIDxSaWNoYXJkLmdvb2RlQHJ1c3NpYW5h ZXJvcy5jb208bWFpbHRvOlJpY2hhcmQuZ29vZGVAcnVzc2lhbmFlcm9zLmNvbT4+IHdyb3RlOg0K WWVzLCB0aGF0IGlzIGFic29sdXRlbHkgY29ycmVjdC4gV2hhdCBwdXp6bGVzIG1lIGlzIHRoYXQg YWx0aG91Z2ggYmVhdXRpZnVsbHkgbWFkZSwgdGhlc2UgY2xvY2tzIGFyZSBub3QgdGhhdCBhY2N1 cmF0ZSwgYW5kLCBnaXZlbiB0aGF0LCBJIHdvbmRlciB3aGV0aGVyIGtlZXBpbmcgdGhlbSB3YXJt IG1ha2VzIGFueSBzaWduaWZpY2FudCBkaWZmZXJlbmNlIQ0KDQpSaWNoYXJkIEdvb2RlDQoNCkZy b206IG93bmVyLXlhay1saXN0LXNlcnZlckBtYXRyb25pY3MuY29tPG1haWx0bzpvd25lci15YWst bGlzdC1zZXJ2ZXJAbWF0cm9uaWNzLmNvbT4gW21haWx0bzpvd25lci15YWstbGlzdC1zZXJ2ZXJA bWF0cm9uaWNzLmNvbTxtYWlsdG86b3duZXIteWFrLWxpc3Qtc2VydmVyQG1hdHJvbmljcy5jb20+ XSBPbiBCZWhhbGYgT2YgQS4gRGVubmlzIFNhdmFyZXNlDQpTZW50OiAwNCBPY3RvYmVyIDIwMTYg MTI6MzgNClRvOiB5YWstbGlzdEBtYXRyb25pY3MuY29tPG1haWx0bzp5YWstbGlzdEBtYXRyb25p Y3MuY29tPg0KU3ViamVjdDogUmU6IFlhay1MaXN0OiBSdXNzaWFuIGNsb2NrIHdpdGggZWxlY3Ry aWNhbCBjb25uZWN0b3JzDQoNCklmIEkgcmVtZW1iZXIgY29ycmVjdGx5LCB0aGUgUnVzc2lhbiBj bG9ja3Mgd2VyZSBjb25uZWN0ZWQgdG8gdGhlIHBpdG90IGhlYXQgY2lyY3VpdC4gIFRodXMgaWYg cGl0b3QgaGVhdCB3YXMgdHVybmVkIG9uLCB0aGUgaW50ZXJuYWwgY2xvY2sgaGVhdGVyIHdhcyB0 dXJuZWQgb24gYXMgd2VsbC4NCkRlbm5pcw0KDQpfX19fX19fX19fX19fX19fX19fX19fX19fX19f X19fXw0KRnJvbTogRGlkaWVyIEJsb3V6YXJkIDxkaWRpZXIuYmxvdXphcmRAZ21haWwuY29tPG1h aWx0bzpkaWRpZXIuYmxvdXphcmRAZ21haWwuY29tPj4NClRvOiAieWFrLWxpc3RAbWF0cm9uaWNz LmNvbTxtYWlsdG86eWFrLWxpc3RAbWF0cm9uaWNzLmNvbT4iIDx5YWstbGlzdEBtYXRyb25pY3Mu Y29tPG1haWx0bzp5YWstbGlzdEBtYXRyb25pY3MuY29tPj4NClNlbnQ6IFR1ZXNkYXksIE9jdG9i ZXIgNCwgMjAxNiA3OjExIEFNDQpTdWJqZWN0OiBSZTogWWFrLUxpc3Q6IFJ1c3NpYW4gY2xvY2sg d2l0aCBlbGVjdHJpY2FsIGNvbm5lY3RvcnMNCg0KU2FtZSBjbG9jayBpcyBzaXR0aW5nIG9uIG15 IGRlc2sgaW4gbXkgYm9mZmljZSByaWdodCBpbiBmcm9udCBvZiBtZSwgaW5kZWVkIHR3byBjb25u ZWN0b3JzDQoyN3YNCg0KMjAxNi0xMC0wNCAxMzowNSBHTVQrMDI6MDAgSmFuIE1ldmlzIDxqYW4u bWV2aXNAaW5mb3JtYXZpYS5iZTxtYWlsdG86amFuLm1ldmlzQGluZm9ybWF2aWEuYmU+PjoNCkkg aGFkIHRvIHJlbW92ZSB0aGUgY2xvY2sgZnJvbSBteSBZYWsgNTAgZm9yIHJlcGFpci4NClRoZW4g SSBub3RpY2VkIHRoYXQgaXQgaGFzIHR3byBjb25uZWN0b3JzIGZvciArMjcgdiBvbiB0aGUgYmFj a3NpZGUgKGFzIHN0YXRlZCBvbiB0aGUgY2xvY2spLg0KVGhpcyBpcyBvYnZpb3VzbHkgbm90IHVz ZWQgb24gdGhlIFlhayA1MC4NCkRvZXMgYW55b25lIGtub3cgd2hhdCB0aGUgcHVycG9zZSBpcz8N Cg0KUmVnYXJkcywNCg0KSmFuDQpZYWsgNTANCg0KDQoNCi0tDQpfX19fX19fX19fX19fX19fX19f X19fX19fX19fDQpEaWRpZXIgQkxPVVpBUkQNCkRpcmVjdGV1ciBHw6luw6lyYWwgREFURVhJUw0K UG9ydGFibGUgOiArMzMgNiA1MSA4NCA0OCAwMjx0ZWw6JTJCMzMlMjA2JTIwNTElMjA4NCUyMDQ4 JTIwMDI+DQpFbWFpbDogZGlkaWVyLmJsb3V6YXJkQGdtYWlsLmNvbTxtYWlsdG86ZGlkaWVyLmJs b3V6YXJkQGFub2xpc3RlY2guZnI+DQoNCg0KLS0NClRoaXMgbWVzc2FnZSBoYXMgYmVlbiBzY2Fu bmVkIGZvciB2aXJ1c2VzIGFuZA0KZGFuZ2Vyb3VzIGNvbnRlbnQgYnkgTWFpbFNjYW5uZXI8aHR0 cDovL3d3dy5tYWlsc2Nhbm5lci5pbmZvLz4sIGFuZCBpcw0KYmVsaWV2ZWQgdG8gYmUgY2xlYW4u DQoNCg0KDQoNCi0tDQpfX19fX19fX19fX19fX19fX19fX19fX19fX19fDQpEaWRpZXIgQkxPVVpB UkQNCkRpcmVjdGV1ciBHw6luw6lyYWwgREFURVhJUw0KUG9ydGFibGUgOiArMzMgNiA1MSA4NCA0 OCAwMg0KRW1haWw6IGRpZGllci5ibG91emFyZEBnbWFpbC5jb208bWFpbHRvOmRpZGllci5ibG91 emFyZEBhbm9saXN0ZWNoLmZyPg0KDQo ________________________________ Message 16 ____________________________________ Time: 06:24:43 PM PST US From: Justin Drafts Subject: Re: Yak-List: Russian clock with electrical connectors Yes thanks gents, all VERY helpful info - Justin On Tue, Oct 4, 2016 at 3:40 PM, Chris & Diane Burton wrote: > This might help you. > > Cheers > Chris > > > On 5/10/2016, at 1:42 AM, Justin Drafts wrote: > > Gents, while we're on the topic, I've never used my CJ6's Soviet clock al l > that much. I'm wondering what the red button/knob on the left does? Photo > attached. (I see that depressing it flips a red flag to white in the top > dial...) The silver knob on right is for on/off, but needed for winding b y > any chance? Or draws its power from the main a/c bus? > > Can anyone give me a quick tutorial on the clock's functions? > > Thanks- > > Justin/N280NC > > On Tue, Oct 4, 2016 at 8:10 AM, Richard Goode russianaeros.com> wrote: > >> Yes, that is absolutely correct. What puzzles me is that although >> beautifully made, these clocks are not that accurate, and, given that, I >> wonder whether keeping them warm makes any significant difference! >> >> >> >> Richard Goode >> >> >> >> *From:* owner-yak-list-server@matronics.com [mailto:owner-yak- >> list-server@matronics.com] *On Behalf Of *A. Dennis Savarese >> *Sent:* 04 October 2016 12:38 >> *To:* yak-list@matronics.com >> *Subject:* Re: Yak-List: Russian clock with electrical connectors >> >> >> >> If I remember correctly, the Russian clocks were connected to the pitot >> heat circuit. Thus if pitot heat was turned on, the internal clock heat er >> was turned on as well. >> >> Dennis >> >> >> ------------------------------ >> >> *From:* Didier Blouzard >> *To:* "yak-list@matronics.com" >> *Sent:* Tuesday, October 4, 2016 7:11 AM >> *Subject:* Re: Yak-List: Russian clock with electrical connectors >> >> >> >> Same clock is sitting on my desk in my boffice right in front of me, >> indeed two connectors >> >> 27v >> >> >> >> 2016-10-04 13:05 GMT+02:00 Jan Mevis : >> >> I had to remove the clock from my Yak 50 for repair. >> >> Then I noticed that it has two connectors for +27 v on the backside (as >> stated on the clock). >> >> This is obviously not used on the Yak 50. >> >> Does anyone know what the purpose is? >> >> >> >> Regards, >> >> >> >> Jan >> >> Yak 50 >> >> >> >> >> >> -- >> >> >> >> >> *____________________________Didier BLOUZARDDirecteur G=C3=A9n=C3=A9ral DATEXIS*Portable >> : +33 6 51 84 48 02 >> Email: didier.blouzard@gmail.com >> >> >> >> >> -- >> This message has been scanned for viruses and >> dangerous content by *MailScanner* , and i s >> >> believed to be clean. >> > > > > ________________________________ Message 17 ____________________________________ Time: 11:08:31 PM PST US Subject: Re: Yak-List: Russian clock with electrical connectors From: Jan Mevis Very interesting indeed, thanks to all! Jan From: on behalf of Justin Drafts Subject: Re: Yak-List: Russian clock with electrical connectors Yes thanks gents, all VERY helpful info - Justin On Tue, Oct 4, 2016 at 3:40 PM, Chris & Diane Burton wrote: > This might help you=8A. > > Cheers > Chris > > >> On 5/10/2016, at 1:42 AM, Justin Drafts wrote: >> >> Gents, while we're on the topic, I've never used my CJ6's Soviet clock a ll >> that much. I'm wondering what the red button/knob on the left does? Phot o >> attached. (I see that depressing it flips a red flag to white in the top >> dial...) The silver knob on right is for on/off, but needed for winding by >> any chance? Or draws its power from the main a/c bus? >> >> Can anyone give me a quick tutorial on the clock's functions? >> >> Thanks- >> >> Justin/N280NC >> >> On Tue, Oct 4, 2016 at 8:10 AM, Richard Goode >> wrote: >>> Yes, that is absolutely correct. What puzzles me is that although >>> beautifully made, these clocks are not that accurate, and, given that, I >>> wonder whether keeping them warm makes any significant difference! >>> >>> Richard Goode >>> >>> >>> From: owner-yak-list-server@matronics.com >>> [mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis Sav arese >>> Sent: 04 October 2016 12:38 >>> To: yak-list@matronics.com >>> Subject: Re: Yak-List: Russian clock with electrical connectors >>> >>> >>> If I remember correctly, the Russian clocks were connected to the pitot heat >>> circuit. Thus if pitot heat was turned on, the internal clock heater w as >>> turned on as well. >>> >>> Dennis >>> >>> >>> >>> >>> From: Didier Blouzard >>> To: "yak-list@matronics.com" >>> Sent: Tuesday, October 4, 2016 7:11 AM >>> Subject: Re: Yak-List: Russian clock with electrical connectors >>> >>> >>> >>> Same clock is sitting on my desk in my boffice right in front of me, in deed >>> two connectors >>> >>> 27v >>> >>> >>> >>> 2016-10-04 13:05 GMT+02:00 Jan Mevis : >>>> >>>> I had to remove the clock from my Yak 50 for repair. >>>> >>>> Then I noticed that it has two connectors for +27 v on the backside (a s >>>> stated on the clock). >>>> >>>> This is obviously not used on the Yak 50. >>>> >>>> Does anyone know what the purpose is? >>>> >>>> >>>> >>>> Regards, >>>> >>>> >>>> >>>> Jan >>>> >>>> Yak 50 >>> >>> >>> >>> -- >>> >>> ____________________________ >>> Didier BLOUZARD >>> Directeur G=E9n=E9ral DATEXIS >>> Portable : +33 6 51 84 48 02 >>> Email: didier.blouzard@gmail.com >>> >>> >>> -- >>> This message has been scanned for viruses and >>> dangerous content by MailScanner , and i s >>> believed to be clean. >> >> > ________________________________ Message 18 ____________________________________ Time: 11:38:03 PM PST US From: Chris & Diane Burton Subject: Re: Yak-List: Russian clock with electrical connectors I am glad to be able to assist. I wish I could claim credit for the picture, but I got it off the internet somewhere. I have one of these clocks sitting on my desk and while I am a typical male who can usually stuff it up without printed help, I had to hunt down some instructions on how to drive the thing. If the clock is inaccurate, you can also adjust the =98speed=99 by twiddling a screw on the rear. Chris > On 5/10/2016, at 7:07 PM, Jan Mevis wrote: > > Very interesting indeed, thanks to all! > > Jan > > From: > on behalf of Justin Drafts > > > Date: Wednesday 5 October 2016 at 03:23 > To: "yak-list@matronics.com " > > Subject: Re: Yak-List: Russian clock with electrical connectors > > Yes thanks gents, all VERY helpful info - > > Justin > > On Tue, Oct 4, 2016 at 3:40 PM, Chris & Diane Burton > wrote: > This might help you. > > Cheers > Chris > > > >> On 5/10/2016, at 1:42 AM, Justin Drafts > wrote: >> >> Gents, while we're on the topic, I've never used my CJ6's Soviet clock all that much. I'm wondering what the red button/knob on the left does? Photo attached. (I see that depressing it flips a red flag to white in the top dial...) The silver knob on right is for on/off, but needed for winding by any chance? Or draws its power from the main a/c bus? >> >> Can anyone give me a quick tutorial on the clock's functions? >> >> Thanks- >> >> Justin/N280NC >> >> On Tue, Oct 4, 2016 at 8:10 AM, Richard Goode > wrote: >> Yes, that is absolutely correct. What puzzles me is that although beautifully made, these clocks are not that accurate, and, given that, I wonder whether keeping them warm makes any significant difference! >> >> >> >> Richard Goode >> >> >> >> From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com ] On Behalf Of A. Dennis Savarese >> Sent: 04 October 2016 12:38 >> To: yak-list@matronics.com >> Subject: Re: Yak-List: Russian clock with electrical connectors >> >> >> >> If I remember correctly, the Russian clocks were connected to the pitot heat circuit. Thus if pitot heat was turned on, the internal clock heater was turned on as well. >> >> Dennis >> >> >> >> From: Didier Blouzard > >> To: "yak-list@matronics.com " > >> Sent: Tuesday, October 4, 2016 7:11 AM >> Subject: Re: Yak-List: Russian clock with electrical connectors >> >> >> >> Same clock is sitting on my desk in my boffice right in front of me, indeed two connectors >> >> 27v >> >> >> >> 2016-10-04 13:05 GMT+02:00 Jan Mevis >: >> >> I had to remove the clock from my Yak 50 for repair. >> >> Then I noticed that it has two connectors for +27 v on the backside (as stated on the clock). >> >> This is obviously not used on the Yak 50. >> >> Does anyone know what the purpose is? >> >> >> >> Regards, >> >> >> >> Jan >> >> Yak 50 >> >> >> >> >> >> >> -- >> >> ____________________________ >> Didier BLOUZARD >> Directeur G=C3=A9n=C3=A9ral DATEXIS >> Portable : +33 6 51 84 48 02 >> Email: didier.blouzard@gmail.com >> >> >> >> -- >> This message has been scanned for viruses and >> dangerous content by MailScanner , and is >> believed to be clean. >> >> >> > > > ________________________________ Message 19 ____________________________________ Time: 11:54:29 PM PST US Subject: Re: Yak-List: Russian clock with electrical connectors From: Jan Mevis I am running mine, after repair, on my desk. After 24 hours it is still indicates the correct time (to the minute, at least). So IMHO, it=B9s more than good enough for use in a 50 or 52. Though I can imagine that the G-forces while flying or from aerobatics migh t influence the accuracy. Jan From: on behalf of Chris & Diane Burton Subject: Re: Yak-List: Russian clock with electrical connectors I am glad to be able to assist. I wish I could claim credit for the picture, but I got it off the internet somewhere. I have one of these clocks sitting on my desk and while I am a typical male who can usually stuff it up without printed help, I had to hunt down some instructions on how to drive the thing. If the clock is inaccurate, you can also adjust the =8Cspeed=B9 by twiddling a screw on the rear. Chris > On 5/10/2016, at 7:07 PM, Jan Mevis wrote: > > Very interesting indeed, thanks to all! > > Jan > > From: on behalf of Justin Drafts > > Date: Wednesday 5 October 2016 at 03:23 > To: "yak-list@matronics.com" > Subject: Re: Yak-List: Russian clock with electrical connectors > > Yes thanks gents, all VERY helpful info - > > Justin > > On Tue, Oct 4, 2016 at 3:40 PM, Chris & Diane Burton > wrote: >> This might help you=8A. >> >> Cheers >> Chris >> >> >> >>> On 5/10/2016, at 1:42 AM, Justin Drafts wrote : >>> >>> Gents, while we're on the topic, I've never used my CJ6's Soviet clock all >>> that much. I'm wondering what the red button/knob on the left does? Pho to >>> attached. (I see that depressing it flips a red flag to white in the to p >>> dial...) The silver knob on right is for on/off, but needed for winding by >>> any chance? Or draws its power from the main a/c bus? >>> >>> Can anyone give me a quick tutorial on the clock's functions? >>> >>> Thanks- >>> >>> Justin/N280NC >>> >>> On Tue, Oct 4, 2016 at 8:10 AM, Richard Goode >>> wrote: >>>> Yes, that is absolutely correct. What puzzles me is that although >>>> beautifully made, these clocks are not that accurate, and, given that, I >>>> wonder whether keeping them warm makes any significant difference! >>>> >>>> Richard Goode >>>> >>>> >>>> From: owner-yak-list-server@matronics.com >>>> [mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis >>>> Savarese >>>> Sent: 04 October 2016 12:38 >>>> To: yak-list@matronics.com >>>> Subject: Re: Yak-List: Russian clock with electrical connectors >>>> >>>> >>>> If I remember correctly, the Russian clocks were connected to the pito t >>>> heat circuit. Thus if pitot heat was turned on, the internal clock he ater >>>> was turned on as well. >>>> >>>> Dennis >>>> >>>> >>>> >>>> >>>> From: Didier Blouzard >>>> To: "yak-list@matronics.com" >>>> Sent: Tuesday, October 4, 2016 7:11 AM >>>> Subject: Re: Yak-List: Russian clock with electrical connectors >>>> >>>> >>>> >>>> Same clock is sitting on my desk in my boffice right in front of me, i ndeed >>>> two connectors >>>> >>>> 27v >>>> >>>> >>>> >>>> 2016-10-04 13:05 GMT+02:00 Jan Mevis : >>>>> >>>>> I had to remove the clock from my Yak 50 for repair. >>>>> >>>>> Then I noticed that it has two connectors for +27 v on the backside ( as >>>>> stated on the clock). >>>>> >>>>> This is obviously not used on the Yak 50. >>>>> >>>>> Does anyone know what the purpose is? >>>>> >>>>> >>>>> >>>>> Regards, >>>>> >>>>> >>>>> >>>>> Jan >>>>> >>>>> Yak 50 >>>> >>>> >>>> >>>> -- >>>> >>>> ____________________________ >>>> Didier BLOUZARD >>>> Directeur G=E9n=E9ral DATEXIS >>>> Portable : +33 6 51 84 48 02 >>>> Email: didier.blouzard@gmail.com >>>> >>>> >>>> -- >>>> This message has been scanned for viruses and >>>> dangerous content by MailScanner , and is >>>> believed to be clean. >>> >>> >> > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.