---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 10/18/16: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:55 AM - help with a CJ motor that will not start (jlpartington@reagan.com) 2. 07:09 AM - Re: help with a CJ motor that will not start (Phil Salter) 3. 08:21 AM - Re: help with a CJ motor that will not start (Ernest Martinez) 4. 01:29 PM - Re: Re: Yak 52TW Uplock Sensors (Roger Kemp) 5. 04:48 PM - Re: Re: Yak 52TW Uplock Sensors (A. Dennis Savarese) ________________________________ Message 1 _____________________________________ Time: 06:55:18 AM PST US Subject: Yak-List: help with a CJ motor that will not start From: jlpartington@reagan.com =0AMy cell phone note was less than clear.=0A =0AI picked up a running CJ m otor that had been converted to auto plugs (my first with that mod)=0A =0AU nfortunately, life interrupted the process and I let the motor sit for seve ral months before I tried to start it.re-stabbed the mags and timed them. Got it to run and started doing other details. Now it will not start.=0A =0AThe valves are clean, ie turns over smoothly, the plugs are sparking out side the cylinders, gas is flowing to carb and drips out if throttle is pum ped. Primer has been cleared and tested. =0A =0ANo fire at all. ??? Sugg estions? ________________________________ Message 2 _____________________________________ Time: 07:09:08 AM PST US From: Phil Salter Subject: Re: Yak-List: help with a CJ motor that will not start Are you using air for the starter? Some seem to have trouble starting on nit rogen, although I never had a problem. Next I would take a look at the start vibrator or shower of sparks lead in the mag. Those go bad, it is an easy f ix. It was running, so I would guess the timing is good.. Good luck Phil Sent from my iPad > On Oct 18, 2016, at 8:52 AM, jlpartington@reagan.com wrote: > > My cell phone note was less than clear. > > I picked up a running CJ motor that had been converted to auto plugs (my f irst with that mod) > > Unfortunately, life interrupted the process and I let the motor sit for se veral months before I tried to start it.re-stabbed the mags and timed them. Got it to run and started doing other details. Now it will not start. > > The valves are clean, ie turns over smoothly, the plugs are sparking outsi de the cylinders, gas is flowing to carb and drips out if throttle is pumped . Primer has been cleared and tested. > > No fire at all. ??? Suggestions? ________________________________ Message 3 _____________________________________ Time: 08:21:52 AM PST US From: Ernest Martinez Subject: Re: Yak-List: help with a CJ motor that will not start Bad Gas?? On Tue, Oct 18, 2016 at 9:52 AM, wrote: > My cell phone note was less than clear. > > > I picked up a running CJ motor that had been converted to auto plugs (my > first with that mod) > > > Unfortunately, life interrupted the process and I let the motor sit for > several months before I tried to start it.re-stabbed the mags and timed > them. Got it to run and started doing other details. Now it will not > start. > > > The valves are clean, ie turns over smoothly, the plugs are sparking > outside the cylinders, gas is flowing to carb and drips out if throttle is > pumped. Primer has been cleared and tested. > > > No fire at all. ??? Suggestions? > ________________________________ Message 4 _____________________________________ Time: 01:29:08 PM PST US Subject: Re: Yak-List: Re: Yak 52TW Uplock Sensors From: Roger Kemp Copy. Then as Dennis said time to adjust the micro switch or replace it. You have done a wiring continuity check? Doc Sent from my iPad > On Oct 17, 2016, at 11:48 PM, ggtyler wrote: > > > Viperdoc Yes, we have verified that the gear is coming all the way up on jackstands, uplocks are working correctly and barber poles are coming all the way up. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=461412#461412 > > > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 04:48:07 PM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Re: Yak 52TW Uplock Sensors I don't think it's a wiring issue since he was able to lock the gear in the UP position by putting negative G on the airplane.=C2- 'Anything is poss ible though.=C2- I believe he said the lamp would flicker on and off, which led me to believ e it was a microswitch engagement adjustment.Dennis From: Roger Kemp To: yak-list@matronics.com Sent: Tuesday, October 18, 2016 4:28 PM Subject: Re: Yak-List: Re: Yak 52TW Uplock Sensors Copy. Then as Dennis said time to adjust the micro switch or replace it. Yo u have done a wiring continuity check? Doc Sent from my iPad > On Oct 17, 2016, at 11:48 PM, ggtyler wrote: > > > Viperdoc Yes, we have verified that the gear is coming all the way up on jackstands, uplocks are working correctly and barber poles are coming all t he way up. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=461412#461412 > > > > > > > > > > S - WIKI - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.