Today's Message Index:
----------------------
1. 11:57 AM - Re: Yak CJ axle measurement, please ? (doug sapp)
2. 12:30 PM - Re: Yak CJ axle measurement, please ? (John Warwick)
3. 12:35 PM - Huosai Generator (Craig Payne)
4. 06:53 PM - Re: Huosai Generator (Marcus Bates)
5. 08:40 PM - 1973 CJ-6A For Sale (Daniel Sallee)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak CJ axle measurement, please ? |
John,
The CJ6 nose wheel axle has a smaller ID on the threaded end, than on the
"flanged" end. This smaller ID extends only about 3/4 of an inch, after
that the ID is constant.
I just measured 3 new axles from my inventory
Threaded end:
1. 1.0245
2. 1.0285
3. 1.0260
Flanged end
1. 1.2260
2. 1.2185
3. 1.2205
Best,
Doug
On Thu, Jan 12, 2017 at 10:14 PM, fishmouth500 <john.warwick1@gmail.com>
wrote:
>
> Will anybody out there with Yak/CJ Cleveland Nosewheel conversion help me
> out with an axle measurement, please ?
>
> Over the years many people have fitted the Cleveland Wheel to the nose
> gear so they can take advantage of a less expensive US made tire, (instead
> of the Desser product fitted to stock Russian and Chinese nosewheels.)
>
> This inquiry has to do with a towbar product that fits into the Nosewheel
> Axle Inner Diameter.
>
> I realize that the Cleveland conversion kits added bushings over the OD of
> the stock axle....( so no reason at all why the axle bore should be
> modified...) but the very first Cleveland converted nosewheel CJ I went to,
> had a Nosewheel axle ID that was larger than both Yak and CJ....?
>
> Background...
> Stock Yak 52 nosewheel axle ID 1.017"
> Stock CJ nosewheel axle ID 1.188"
>
> If you are running a Cleveland nosewheel conversion, would you do me a big
> favour and take a measurement of the nosewheel axle INNER diameter.
>
> Thanks !
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=465036#465036
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak CJ axle measurement, please ? |
Thanks very much Doug !!
On Fri, Jan 13, 2017 at 11:56 AM, doug sapp <dougsappllc@gmail.com> wrote:
> John,
> The CJ6 nose wheel axle has a smaller ID on the threaded end, than on the
> "flanged" end. This smaller ID extends only about 3/4 of an inch, after
> that the ID is constant.
>
> I just measured 3 new axles from my inventory
>
> Threaded end:
>
> 1. 1.0245
> 2. 1.0285
> 3. 1.0260
>
> Flanged end
>
> 1. 1.2260
> 2. 1.2185
> 3. 1.2205
>
> Best,
> Doug
>
> On Thu, Jan 12, 2017 at 10:14 PM, fishmouth500 <john.warwick1@gmail.com>
> wrote:
>
>>
>> Will anybody out there with Yak/CJ Cleveland Nosewheel conversion help me
>> out with an axle measurement, please ?
>>
>> Over the years many people have fitted the Cleveland Wheel to the nose
>> gear so they can take advantage of a less expensive US made tire, (instead
>> of the Desser product fitted to stock Russian and Chinese nosewheels.)
>>
>> This inquiry has to do with a towbar product that fits into the Nosewheel
>> Axle Inner Diameter.
>>
>> I realize that the Cleveland conversion kits added bushings over the OD
>> of the stock axle....( so no reason at all why the axle bore should be
>> modified...) but the very first Cleveland converted nosewheel CJ I went to,
>> had a Nosewheel axle ID that was larger than both Yak and CJ....?
>>
>> Background...
>> Stock Yak 52 nosewheel axle ID 1.017"
>> Stock CJ nosewheel axle ID 1.188"
>>
>> If you are running a Cleveland nosewheel conversion, would you do me a
>> big favour and take a measurement of the nosewheel axle INNER diameter.
>>
>> Thanks !
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=465036#465036
>>
>>
>>
>>
>>
>>
>> ===================================
>> List" rel="noreferrer" target="_blank">http://www.matronics.com/
>> Navigator?Yak-List
>> ===================================
>> FORUMS -
>> eferrer" target="_blank">http://forums.matronics.com
>> ===================================
>> WIKI -
>> errer" target="_blank">http://wiki.matronics.com
>> ===================================
>> b Site -
>> -Matt Dralle, List Admin.
>> rel="noreferrer" target="_blank">http://www.matronics.com/contribution
>> ===================================
>>
>>
>>
>>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Huosai Generator |
I broke a rusted spring holding in one of the point sets in my standard CJ
generator, I'm looking for a serviceable generator or one I can cannibalize
for that part. Off-list please.
Craig Payne
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Huosai Generator |
Craig.........got a few parts generators.
Sent from my iPad
> On Jan 13, 2017, at 2:35 PM, Craig Payne <yakman285@gmail.com> wrote:
>
> I broke a rusted spring holding in one of the point sets in my standard CJ generator,
I'm looking for a serviceable generator or one I can cannibalize for
that part. Off-list please.
>
> Craig Payne
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 1973 CJ-6A For Sale |
I don't want to, but it's time to sell my CJ. This is a very nice stock
1973 CJ-6A with 8/10 paint. Barnstormers ad is below. Email me with any
specific questions.
danielsallee@gmail.com
http://www.barnstormers.com/listing.php?id=1211972
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|