---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Fri 01/13/17: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:57 AM - Re: Yak CJ axle measurement, please ? (doug sapp) 2. 12:30 PM - Re: Yak CJ axle measurement, please ? (John Warwick) 3. 12:35 PM - Huosai Generator (Craig Payne) 4. 06:53 PM - Re: Huosai Generator (Marcus Bates) 5. 08:40 PM - 1973 CJ-6A For Sale (Daniel Sallee) ________________________________ Message 1 _____________________________________ Time: 11:57:17 AM PST US From: doug sapp Subject: Re: Yak-List: Yak CJ axle measurement, please ? John, The CJ6 nose wheel axle has a smaller ID on the threaded end, than on the "flanged" end. This smaller ID extends only about 3/4 of an inch, after that the ID is constant. I just measured 3 new axles from my inventory Threaded end: 1. 1.0245 2. 1.0285 3. 1.0260 Flanged end 1. 1.2260 2. 1.2185 3. 1.2205 Best, Doug On Thu, Jan 12, 2017 at 10:14 PM, fishmouth500 wrote: > > Will anybody out there with Yak/CJ Cleveland Nosewheel conversion help me > out with an axle measurement, please ? > > Over the years many people have fitted the Cleveland Wheel to the nose > gear so they can take advantage of a less expensive US made tire, (instead > of the Desser product fitted to stock Russian and Chinese nosewheels.) > > This inquiry has to do with a towbar product that fits into the Nosewheel > Axle Inner Diameter. > > I realize that the Cleveland conversion kits added bushings over the OD of > the stock axle....( so no reason at all why the axle bore should be > modified...) but the very first Cleveland converted nosewheel CJ I went to, > had a Nosewheel axle ID that was larger than both Yak and CJ....? > > Background... > Stock Yak 52 nosewheel axle ID 1.017" > Stock CJ nosewheel axle ID 1.188" > > If you are running a Cleveland nosewheel conversion, would you do me a big > favour and take a measurement of the nosewheel axle INNER diameter. > > Thanks ! > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=465036#465036 > > ________________________________ Message 2 _____________________________________ Time: 12:30:02 PM PST US From: John Warwick Subject: Re: Yak-List: Yak CJ axle measurement, please ? Thanks very much Doug !! On Fri, Jan 13, 2017 at 11:56 AM, doug sapp wrote: > John, > The CJ6 nose wheel axle has a smaller ID on the threaded end, than on the > "flanged" end. This smaller ID extends only about 3/4 of an inch, after > that the ID is constant. > > I just measured 3 new axles from my inventory > > Threaded end: > > 1. 1.0245 > 2. 1.0285 > 3. 1.0260 > > Flanged end > > 1. 1.2260 > 2. 1.2185 > 3. 1.2205 > > Best, > Doug > > On Thu, Jan 12, 2017 at 10:14 PM, fishmouth500 > wrote: > >> >> Will anybody out there with Yak/CJ Cleveland Nosewheel conversion help me >> out with an axle measurement, please ? >> >> Over the years many people have fitted the Cleveland Wheel to the nose >> gear so they can take advantage of a less expensive US made tire, (instead >> of the Desser product fitted to stock Russian and Chinese nosewheels.) >> >> This inquiry has to do with a towbar product that fits into the Nosewheel >> Axle Inner Diameter. >> >> I realize that the Cleveland conversion kits added bushings over the OD >> of the stock axle....( so no reason at all why the axle bore should be >> modified...) but the very first Cleveland converted nosewheel CJ I went to, >> had a Nosewheel axle ID that was larger than both Yak and CJ....? >> >> Background... >> Stock Yak 52 nosewheel axle ID 1.017" >> Stock CJ nosewheel axle ID 1.188" >> >> If you are running a Cleveland nosewheel conversion, would you do me a >> big favour and take a measurement of the nosewheel axle INNER diameter. >> >> Thanks ! >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=465036#465036 >> >> >> >> >> >> >> =================================== >> List" rel="noreferrer" target="_blank">http://www.matronics.com/ >> Navigator?Yak-List >> =================================== >> FORUMS - >> eferrer" target="_blank">http://forums.matronics.com >> =================================== >> WIKI - >> errer" target="_blank">http://wiki.matronics.com >> =================================== >> b Site - >> -Matt Dralle, List Admin. >> rel="noreferrer" target="_blank">http://www.matronics.com/contribution >> =================================== >> >> >> >> > ________________________________ Message 3 _____________________________________ Time: 12:35:21 PM PST US From: Craig Payne Subject: Yak-List: Huosai Generator I broke a rusted spring holding in one of the point sets in my standard CJ generator, I'm looking for a serviceable generator or one I can cannibalize for that part. Off-list please. Craig Payne ________________________________ Message 4 _____________________________________ Time: 06:53:19 PM PST US Subject: Re: Yak-List: Huosai Generator From: Marcus Bates Craig.........got a few parts generators. Sent from my iPad > On Jan 13, 2017, at 2:35 PM, Craig Payne wrote: > > I broke a rusted spring holding in one of the point sets in my standard CJ generator, I'm looking for a serviceable generator or one I can cannibalize for that part. Off-list please. > > Craig Payne ________________________________ Message 5 _____________________________________ Time: 08:40:06 PM PST US From: Daniel Sallee Subject: Yak-List: 1973 CJ-6A For Sale I don't want to, but it's time to sell my CJ. This is a very nice stock 1973 CJ-6A with 8/10 paint. Barnstormers ad is below. Email me with any specific questions. danielsallee@gmail.com http://www.barnstormers.com/listing.php?id=1211972 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.