---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 05/09/17: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:20 AM - Re: HS 6 FAILURE (Lancer) 2. 11:22 AM - brake metering valve (Jon Boede) 3. 12:19 PM - Re: brake metering valve (Anthony Savarese) ________________________________ Message 1 _____________________________________ Time: 03:20:15 AM PST US Subject: Yak-List: Re: HS 6 FAILURE From: "Lancer" woodja51 wrote: > Does any one know if the rear accessory case simply comes away from the intermediate case on a HS6 , or does it have to be pulled down / aft securing bolt removed to detach it ? The manuals indicate the drive shaft for the accessories might slide over the end of the crankshaft output and not rigidly fixed - allowing removal in one piece ? Or... not ! > > Still working on finding out what let go inside mine ... have found some larger chunks of non ferrous bits when looking down a few intake tubes .. Yes, the accessory drive will come off the engine without needing to remove the oil tank. You'll need to bend the air start pipes a bit but it is possible. Metal in the intake tubes sounds like something has come adrift in the supercharger.......That's going to be messy..... Good Luck -------- You can run but you can't hide Read this topic online here: http://forums.matronics.com/viewtopic.php?p=469136#469136 ________________________________ Message 2 _____________________________________ Time: 11:22:55 AM PST US From: Jon Boede Subject: Yak-List: brake metering valve In the CJ: If I put the rudder pedals full left or full right and squeeze the brake ha ndle I hear the brake system fill and then all the noises stop. If I put the rudder pedals to the middle position and squeeze, there's an o n-going pneumatic noise that I'm not quite able to describe. Probably means my QS-2 brake metering valve is in need of TLC, yes? I see that there's an overhaul kit for it... is that something that takes well to an overhaul or best to just get a whole new valve? Jon ________________________________ Message 3 _____________________________________ Time: 12:19:27 PM PST US Subject: Re: Yak-List: brake metering valve From: Anthony Savarese Yes. Order the rebuild kit from Doug. Shouldn't need a new one unless it's horribly corroded. Dennis Sent from my iPhone > On May 9, 2017, at 2:20 PM, Jon Boede wrote: > > In the CJ: > > > If I put the rudder pedals full left or full right and squeeze the brake h andle I hear the brake system fill and then all the noises stop. > > > If I put the rudder pedals to the middle position and squeeze, there's an o n-going pneumatic noise that I'm not quite able to describe. > > > Probably means my QS-2 brake metering valve is in need of TLC, yes? I see that there's an overhaul kit for it... is that something that takes well to an overhaul or best to just get a whole new valve? > > > Jon > > ========================== ========================== ========================== ========================== ========================== ========================== ========================== ============ ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.