---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Fri 06/23/17: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:34 AM - Excessive fuel burn on CJ6 (Housai engine) (altman51) 2. 09:22 AM - Looking for Yak 18T Spinner(s) (fishmouth500) 3. 09:32 AM - Re: Excessive fuel burn on CJ6 (Housai engine) (Hans Oortman) 4. 10:21 AM - Big Cannon Plug (Scott Glaser) 5. 10:26 AM - Re: Excessive fuel burn on CJ6 (Housai engine) (Walter Lannon) 6. 12:37 PM - Re: Excessive fuel burn on CJ6 (Housai engine) (altman51) 7. 04:34 PM - Re: Excessive fuel burn on CJ6 (Housai engine) (bill wade) ________________________________ Message 1 _____________________________________ Time: 08:34:12 AM PST US Subject: Yak-List: Excessive fuel burn on CJ6 (Housai engine) From: "altman51" Am lately getting excessive fuel burn at about 19gph when previously it was about 15gph. anybody have this problem if so what did you find? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470407#470407 ________________________________ Message 2 _____________________________________ Time: 09:22:13 AM PST US Subject: Yak-List: Looking for Yak 18T Spinner(s) From: "fishmouth500" Any condition. Also can anyone sell me a spare M14-P Sump Oil pick up tube, please, The short curved one that lives above the sump strainer. Thanks John www.theyakcollection.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470409#470409 Attachments: http://forums.matronics.com//files/oil_pickup_tube_774.jpg http://forums.matronics.com//files/oil_pickup_tube_198.jpg ________________________________ Message 3 _____________________________________ Time: 09:32:14 AM PST US Subject: Re: Yak-List: Excessive fuel burn on CJ6 (Housai engine) From: Hans Oortman Too low compression on one or more cilinders?? Regards, Hans O. Op 23-06-17 17:31, altman51 schreef: > > Am lately getting excessive fuel burn at about 19gph when previously it was > about 15gph. anybody have this problem if so what did you find? > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=470407#470407 > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 10:21:04 AM PST US From: Scott Glaser Subject: Yak-List: Big Cannon Plug Does anyone know what this massive cannon plug hanging the back of my =9950 was attached to? ________________________________ Message 5 _____________________________________ Time: 10:26:34 AM PST US From: "Walter Lannon" Subject: Re: Yak-List: Excessive fuel burn on CJ6 (Housai engine) Fuel burn or fuel leakage?? One possibility if your fuel header tank has been modified to include a quick-drain fitting: In flight normal positive pressure on the lower surface is sufficient to force upwards any un-reinforced sheet metal access panel. The header tank panel is a perfect example. It is large and un-reinforced and, in my estimation, the centre portion could move upwards 5 or 6 mm or more, easily enough to activate a poorly placed quick drain. Check it out. If suspect, check the drain hole in the dome is open and push the panel upward by hand. Walt -----Original Message----- From: altman51 Sent: Friday, June 23, 2017 8:31 AM Subject: Yak-List: Excessive fuel burn on CJ6 (Housai engine) Am lately getting excessive fuel burn at about 19gph when previously it was about 15gph. anybody have this problem if so what did you find? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470407#470407 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ________________________________ Message 6 _____________________________________ Time: 12:37:25 PM PST US Subject: Yak-List: Re: Excessive fuel burn on CJ6 (Housai engine) From: "altman51" Thanks guys will check it all out. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470417#470417 ________________________________ Message 7 _____________________________________ Time: 04:34:45 PM PST US From: bill wade Subject: Re: Yak-List: Excessive fuel burn on CJ6 (Housai engine) If it was a Yak I'd say take a close look at your primer. in a Yak if its n ot in the center it continues to feed fuel to the engine. From: altman51 To: yak-list@matronics.com Sent: Friday, June 23, 2017 11:43 AM Subject: Yak-List: Excessive fuel burn on CJ6 (Housai engine) Am lately getting excessive fuel burn at about 19gph when previously it was about 15gph. anybody have this problem if so what did you find? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470407#470407 S - WIKI - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.