Today's Message Index:
----------------------
1. 10:02 AM - Re: Trim cable (Walter Lannon)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi Casey;
Take photos of all components of the cable system at every pulley, joint or
other notable location. Study and make sure you fully understand how it
works.
I am not familiar with the Yak 52 system and don't know what cable type and
size they use. The very early CJ's used 2 mm cable but later change to a
not particularly flexible 1 mm size. I have replaced both of these with AN
standard 1/16" extra flexible aircraft cable with excellent results.
Walt
-----Original Message-----
From: Caseyrosz
Sent: Thursday, December 07, 2017 8:58 AM
Subject: Yak-List: Trim cable
I am returning my yak 52 to flying status after a 2.5 year restoration. Does
anyone on the forum have any experience with winding the trim cables on both
trim wheels and the trim actuator on the tail? The manual and associated
diagram leave a lot to be desired. I would love to speak with anyone who has
done it before, to learn any tricks and techniques.
Thanks,
Casey
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=476216#476216
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|