Today's Message Index:
----------------------
1. 06:01 PM - Re: Brake air leak (bmsim)
2. 06:09 PM - Re: ANR Headset advice please? (bmsim)
3. 07:00 PM - Re: Re: ANR Headset advice please? (N6030X)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Brake air leak |
Thanks Dennis, so this is the reducing valve? You had said the reducing valve
was in the upper right of your picture, and this is in the lower right, so just
confirming before I buy a replacement (noone seems to have kits right now).
dsavarese0812(at)bellsout wrote:
> Remove the brake reducing valve and either replace it or rebuild it. That should
fix your problem.
> Dennis
>
> Sent from my iPhone
>
>
> > On Jan 13, 2018, at 12:37 PM, bmsim wrote:
> >
> >
> >
> > I got the floor panel off and the leak is coming from a port on the valve
in the right bottom of Dennis' photo. There's a male threaded port on bottom that
does not have an air line attached, and when I apply the parking brake, air
continuously comes out that port.
> >
> > If the reducing valve is in the top right of the pic, what is this valve?
Strange that it blows out that open port. I'm assuming it is there for a reason
and doesn't need capped.
> >
> > Thanks for the help!
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=477265#477265
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=477290#477290
Attachments:
http://forums.matronics.com//files/20180113_112200_615.jpg
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: ANR Headset advice please? |
I know this isn't one of the sets mentioned, but I have a Bose port and use Bose
sets in my Yak. I cut ANR off for takeoff and landing, but it is GREAT for everything
else. Engine is a LOUD rumble that makes it hard to hear what people
are saying on the radio, then I switch on ANR and it is a quiet hum, really nice.
I just got a clarity aloft type set that I'm going to try out once I correct an
air leak. It isn't ANR, but as stated above, I'm hoping the earplugs plus helmet
seal are just as good.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=477292#477292
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: ANR Headset advice please? |
Clarity Aloft is one of the most returned headsets according to Tina of Tin
asPilotShop.com which sells a private labeled Lightspeed ANR headset that i
s superb for $279
>From my iPhone X
________________________________
From: owner-yak-list-server@matronics.com <owner-yak-list-server@matronics.
com> on behalf of bmsim <bmsim@hotmail.com>
Sent: Sunday, January 14, 2018 8:08:24 PM
Subject: Yak-List: Re: ANR Headset advice please?
I know this isn't one of the sets mentioned, but I have a Bose port and use
Bose sets in my Yak. I cut ANR off for takeoff and landing, but it is GREA
T for everything else. Engine is a LOUD rumble that makes it hard to hear w
hat people are saying on the radio, then I switch on ANR and it is a quiet
hum, really nice.
I just got a clarity aloft type set that I'm going to try out once I correc
t an air leak. It isn't ANR, but as stated above, I'm hoping the earplugs p
lus helmet seal are just as good.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=477292#477292
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|