---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Thu 09/27/18: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:18 AM - Re: CJ6 Landing Gear Handle Leak (A. Dennis Savarese) 2. 06:04 AM - Re: CJ6 Landing Gear Handle Leak (Warren Hill) 3. 06:47 AM - Re: CJ6 Landing Gear Handle Leak (A. Dennis Savarese) 4. 04:01 PM - AI14R/P For Sale Less than 100 SMOH (PS) ________________________________ Message 1 _____________________________________ Time: 05:18:06 AM PST US Subject: Re: Yak-List: CJ6 Landing Gear Handle Leak From: "A. Dennis Savarese" You most likely have a leaking gear actuator. Air is passing from the DOWN side of the actuator past the internal seals and exiting out the UP side of one or more of the actuators. If you purchased a new gear selector from Doug, then it is unlikely the new gear selector is leaking. Dennis A. Dennis Savarese 334-546-8182 (mobile) www.yak-52.com Skype - Yakguy1 On 9/26/2018 9:46 PM, wdjester wrote: > > As painful as it is to say, you might have a bad rear gear handle. > > Sent from my iPad > >> On Sep 26, 2018, at 8:18 PM, Okanogan Lew wrote: >> >> >> I noticed air leaking from my front gear handle & replaced it with a new one from Doug. But, it still leaks in the middle position & in the down position. It stops when the handle is in the up position. Any thoughts? Thanks in advance. >> >> Paul >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=483389#483389 >> >> >> >> >> >> >> >> >> > > ________________________________ Message 2 _____________________________________ Time: 06:04:23 AM PST US From: Warren Hill Subject: Re: Yak-List: CJ6 Landing Gear Handle Leak Had the same series of events. Problem was solved after replacing both of the original main gear actuators. Warren Hill N464TW Mesa, AZ > On Sep 27, 2018, at 5:17 AM, A. Dennis Savarese wrote: > > > You most likely have a leaking gear actuator. Air is passing from the DOWN side of the actuator past the internal seals and exiting out the UP side of one or more of the actuators. > > If you purchased a new gear selector from Doug, then it is unlikely the new gear selector is leaking. > Dennis > > A. Dennis Savarese > 334-546-8182 (mobile) > www.yak-52.com > Skype - Yakguy1 > > On 9/26/2018 9:46 PM, wdjester wrote: >> >> As painful as it is to say, you might have a bad rear gear handle. >> >> Sent from my iPad >> >>> On Sep 26, 2018, at 8:18 PM, Okanogan Lew wrote: >>> >>> >>> I noticed air leaking from my front gear handle & replaced it with a new one from Doug. But, it still leaks in the middle position & in the down position. It stops when the handle is in the up position. Any thoughts? Thanks in advance. >>> >>> Paul ________________________________ Message 3 _____________________________________ Time: 06:47:21 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: CJ6 Landing Gear Handle Leak If the actuators have not been overhauled or replaced in the last 7 or so y ears, you may want to seriously consider overhauling or replacing them.=C2 - Diverter valves too.Dennis From: Warren Hill To: yak-list@matronics.com Sent: Thursday, September 27, 2018 9:09 AM Subject: Re: Yak-List: CJ6 Landing Gear Handle Leak Had the same series of events. Problem was solved after replacing both of t he original main gear actuators. Warren Hill N464TW Mesa, AZ > On Sep 27, 2018, at 5:17 AM, A. Dennis Savarese wrote: > outh.net> > > You most likely have a leaking gear actuator.=C2- Air is passing from t he DOWN side of the actuator past the internal seals and exiting out the UP side of one or more of the actuators. > > If you purchased a new gear selector from Doug, then it is unlikely the n ew gear selector is leaking. > Dennis > > A. Dennis Savarese > 334-546-8182 (mobile) > www.yak-52.com > Skype - Yakguy1 > > On 9/26/2018 9:46 PM, wdjester wrote: >> >> As painful as it is to say, you might have a bad rear gear handle. >> >> Sent from my iPad >> >>> On Sep 26, 2018, at 8:18 PM, Okanogan Lew wrote : >>> >>> >>> I noticed air leaking from my front gear handle & replaced it with a ne w one from Doug.=C2- But, it still leaks in the middle position & in the down position.=C2- It stops when the handle is in the up position.=C2- Any thoughts?=C2- Thanks in advance. >>> >>> Paul S - WIKI - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ________________________________ Message 4 _____________________________________ Time: 04:01:30 PM PST US Subject: Yak-List: AI14R/P For Sale Less than 100 SMOH From: "PS" A friend kindly purchased this engine which was advertised as an M14P, for me at auction. It is 260HP and was installed on a Yak 18A and was removed for an upgrade to an M14P. I also have the prop and hub. Make me an offer! The engine is located in Tulsa OK. Phil -------- Phil Read this topic online here: http://forums.matronics.com/viewtopic.php?p=483414#483414 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.