---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 11/20/18: 14 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:03 AM - Re: HS6A / MP14 carb diaphragms (A. Dennis Savarese) 2. 05:26 AM - Re: HS6A / MP14 carb diaphragms (Yakjumper) 3. 05:33 AM - Snot valve, constantly builds pressure. Normal/Not? (bmsim) 4. 06:53 AM - Re: Snot valve, constantly builds pressure. Normal/Not? (doug sapp) 5. 07:00 AM - Re: HS6A / MP14 carb diaphragms (doug sapp) 6. 09:12 AM - Re: Snot valve, constantly builds pressure. Normal/Not? (A. Dennis Savarese) 7. 01:10 PM - () 8. 01:10 PM - New CJ made it here. Also, trailer pics. (Off2wildblue) 9. 01:48 PM - Re: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? (Bill Culberson) 10. 01:53 PM - Re: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? (George S. Coy) 11. 02:10 PM - Re: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? (Brian Macey) 12. 03:13 PM - Re: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? (Mark Davis) 13. 04:54 PM - Seeking v530 prop cover (glipaz) 14. 04:59 PM - Nanchang for Sale $73,000 (glipaz) ________________________________ Message 1 _____________________________________ Time: 05:03:49 AM PST US Subject: Re: Yak-List: HS6A / MP14 carb diaphragms From: "A. Dennis Savarese" I know from personal experience the diaphragms are NOT interchangeable. Dennis A. Dennis Savarese 334-546-8182 (mobile) www.yak-52.com Skype - Yakguy1 On 11/20/2018 12:27 AM, JL2A wrote: > > Can anyone tell me 100% that they are interchangeable? > > Need to order sets for up to 4 HS6As all well past 6 years of operation > > Also, my CJ6 parts catalogue just has blank pages where the carburettor is meant to be! PLAAF secrets or .pdf problem? > > If anyone has the carburettor parts and drawings could the please share! > > thanks > > Anatole > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=485336#485336 > > ________________________________ Message 2 _____________________________________ Time: 05:26:50 AM PST US Subject: Yak-List: Re: HS6A / MP14 carb diaphragms From: "Yakjumper" Here is a picture of a carb membrane for an M14P from a Yak52. Installed it last week. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485341#485341 Attachments: http://forums.matronics.com//files/m14_carb_gasket_157.jpg ________________________________ Message 3 _____________________________________ Time: 05:33:55 AM PST US Subject: Yak-List: Snot valve, constantly builds pressure. Normal/Not? From: "bmsim" Hello Everyone! In searching for an air leak and rebuilding a couple of things already, I found something I have a question about. Whenever I open the snot valve, air blows out. This is regardless of if the engine has ran or not, if I dump it and let it sit for 10 min, I can open the valve and it has pressure. Is that normal, or might I be leaking air there? Brandon Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485342#485342 ________________________________ Message 4 _____________________________________ Time: 06:53:11 AM PST US From: doug sapp Subject: Re: Yak-List: Snot valve, constantly builds pressure. Normal/Not? Check valve (s) on the PRV are most likely leaking. Doug On Tue, Nov 20, 2018 at 5:41 AM bmsim wrote: > > Hello Everyone! > > In searching for an air leak and rebuilding a couple of things already, I > found something I have a question about. Whenever I open the snot valve, > air blows out. This is regardless of if the engine has ran or not, if I > dump it and let it sit for 10 min, I can open the valve and it has > pressure. Is that normal, or might I be leaking air there? > > > Brandon > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=485342#485342 > > ________________________________ Message 5 _____________________________________ Time: 07:00:16 AM PST US From: doug sapp Subject: Re: Yak-List: HS6A / MP14 carb diaphragms Check the parts book (#4) on my web site, CJ6.com Thanks to Geo Coy there is also a new CJ6 elect.diagram posted on the site. Doug On Mon, Nov 19, 2018 at 9:35 PM JL2A < info@flyingwarbirds.com.au.matronics.com> wrote: > info@flyingwarbirds.com.au.matronics.com> > > Can anyone tell me 100% that they are interchangeable? > > Need to order sets for up to 4 HS6As all well past 6 years of operation > > Also, my CJ6 parts catalogue just has blank pages where the carburettor is > meant to be! PLAAF secrets or .pdf problem? > > If anyone has the carburettor parts and drawings could the please share! > > thanks > > Anatole > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=485336#485336 > > ________________________________ Message 6 _____________________________________ Time: 09:12:43 AM PST US Subject: Re: Yak-List: Snot valve, constantly builds pressure. Normal/Not? From: "A. Dennis Savarese" No, that is not normal. You have a check valve leaking. Dennis A. Dennis Savarese 334-546-8182 (mobile) www.yak-52.com Skype - Yakguy1 On 11/20/2018 8:33 AM, bmsim wrote: > > Hello Everyone! > > In searching for an air leak and rebuilding a couple of things already, I found something I have a question about. Whenever I open the snot valve, air blows out. This is regardless of if the engine has ran or not, if I dump it and let it sit for 10 min, I can open the valve and it has pressure. Is that normal, or might I be leaking air there? > > > Brandon > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=485342#485342 > > ________________________________ Message 7 _____________________________________ Time: 01:10:09 PM PST US ________________________________ Message 8 _____________________________________ Time: 01:10:47 PM PST US Subject: Yak-List: New CJ made it here. Also, trailer pics. From: "Off2wildblue" My CJ arrived from Las Vegas to its new home in Gainesville, Georgia. It took two days for the ferry pilot to make it here. We were able to get the wings pulled and the CJ to my workshop within 24 hours. Now well paint it and go through it and make sure its ready to go. Now the work and learning really begins. I dont know anything about the airplane or how to fly it but I am willing to learn all I can. Here are some pics that show it on the trailer. Sorry if the pics are huge. Ill have to figure that out. SAM Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485363#485363 Attachments: http://forums.matronics.com//files/f9a02abd_48f6_4c4f_9d80_9555e207786e_172.jpeg http://forums.matronics.com//files/5c0585ac_8b95_48f3_af1f_c088874b1ae3_113.jpeg http://forums.matronics.com//files/4672c0ef_8f14_4272_9089_6ed0ac8a1f51_207.jpeg ________________________________ Message 9 _____________________________________ Time: 01:48:20 PM PST US From: Bill Culberson Subject: Re: Yak-List: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? Doesnt look as bad as mine, but you need to check the crankshaft. At that point, its pretty far apart so... Bill Culberson Red Star Aero Services 251/716/8119 > On Nov 20, 2018, at 3:08 PM, Serge Svoysky wrote: > > ________________________________ Message 10 ____________________________________ Time: 01:53:28 PM PST US From: "George S. Coy" Subject: RE: Yak-List: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? I presume you mean can the link rod be replaced. Yes, but it is not fun. If it is a high time engine, you should consider overhaul. George Coy From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Serge Svoysky Sent: Tuesday, November 20, 2018 4:08 PM Subject: Yak-List: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? ________________________________ Message 11 ____________________________________ Time: 02:10:33 PM PST US From: Brian Macey Subject: Re: Yak-List: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? I have a friend looking to buy a damaged motor if you are interested in selling it. I also have a new motor which will be finishing up assembly at Aerometal if anyone is interested. Brian On Tue, Nov 20, 2018 at 1:59 PM Bill Culberson wrote: > > Doesn=99t look as bad as mine, but you need to check the crankshaft . At that > point, it=99s pretty far apart so... > > Bill Culberson > Red Star Aero Services > 251/716/8119 > > > On Nov 20, 2018, at 3:08 PM, Serge Svoysky wrote: > > > > > =========== =========== =========== =========== =========== =========== > > ________________________________ Message 12 ____________________________________ Time: 03:13:45 PM PST US From: "Mark Davis" Subject: RE: Yak-List: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? How did it get bent? Prop strike? Hydraulic lock? Mark Davis N44YK From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Serge Svoysky Sent: Tuesday, November 20, 2018 2:08 PM Subject: Yak-List: Connecting rod cyl # 5 is bent, can the cylinder be replaced or engine OH is a must? ________________________________ Message 13 ____________________________________ Time: 04:54:49 PM PST US Subject: Yak-List: Seeking v530 prop cover From: "glipaz" If you have a prop cover youd like to sell let me know. Gil Text me at 310-245-7078 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485373#485373 ________________________________ Message 14 ____________________________________ Time: 04:59:59 PM PST US Subject: Yak-List: Nanchang for Sale $73,000 From: "glipaz" 1966 Nanchang CJ6A for sale. N26CJ https://www.barnstormers.com/classified_1419297_Nanchang+CJ6A.html Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485374#485374 Attachments: http://forums.matronics.com//files/7a5d0892_6cf2_4184_bf37_42d9b75d74e6_168.jpeg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.