---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sat 03/30/19: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:30 AM - Re: Any Experienced CJ-6 Mechanics Near St Louis? (aeroryan) 2. 12:12 PM - Re: Rolling , banking and happy passengers. (HawkerPilot2015) 3. 07:05 PM - Re: Shutters cable (Roger Kemp) 4. 07:43 PM - Re: Covering Ailerons of YAK (Roger Kemp) 5. 08:47 PM - Re: Covering Ailerons of YAK (Walter Lannon) ________________________________ Message 1 _____________________________________ Time: 11:30:06 AM PST US Subject: Yak-List: Re: Any Experienced CJ-6 Mechanics Near St Louis? From: "aeroryan" Thank you for your recommendation. I will give them a call. My only reluctance is how far away they are from STL. Ideally, I would like to help with the CI so that I can learn while also keeping the cost down. Ryan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=488366#488366 ________________________________ Message 2 _____________________________________ Time: 12:12:48 PM PST US Subject: Yak-List: Re: Rolling , banking and happy passengers. From: "HawkerPilot2015" What is that thing in the middle of your glareshield? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=488368#488368 ________________________________ Message 3 _____________________________________ Time: 07:05:31 PM PST US From: Roger Kemp Subject: Re: Yak-List: Shutters cable Correction: the chisel was skived parallel along the cable to split the cop per housing. Doc Sent from my iPad > On Mar 29, 2019, at 9:00 AM, Roger Kemp wrote: > > Bugger is right. I had to use a grinder to thin the copper tubing to paper thin. I then used a chisel that I ground the tip down to sharp edge. The li ghtly skived the chisel along the thin wall splitting the cable. Usely the c able is gummed up along its shaft in the curve of the cable housing from oil and dirt. > Doc > > Sent from my iPad > >> On Mar 28, 2019, at 1:18 PM, doug sapp wrote: >> >> Dennis, >> Good to know. No Yaks nearby for me to check. >> I have in the past fabricated a new outer sheath out of copper tubing. A s I'm sure you know 99% of the time there is nothing wrong with the inner ca ble, the issue is that the outer sheath is kinked/dented and is binding on t he inner cable or the threaded rod ends which are swaged onto both ends of t he cable. Bugger is getting the old sheath off the cable without screwing i t up. >> >> Doug >> >>> On Thu, Mar 28, 2019 at 11:07 AM A. Dennis Savarese wrote: >>> My experience says the CJ cable, even if it may have the same ends on it , will be too long because the CJ cooling louver control is on the left side of the instrument panel. Whereas the Yak 52's control lever is on the righ t front console. The total length of the Yak 52 cable is going to be much s horter. >>> Dennis >>> >>> On Thursday, March 28, 2019, 12:37:27 PM EDT, doug sapp wrote: >>> >>> >>> Measure the OD of the tube and the overall length and give me a call 50 9-826-4610 >>> >>> Doug >>> >>> On Thu, Mar 28, 2019 at 7:24 AM Pedro Cerveira Pinto wrote: >>> Looking for yak 52 >>> >>> A quinta, 28/03/2019, 13:57, doug sapp escreveu: >>> Are you looking for shutter cable for CJ or Yak? If CJ I have them in s tock, if for Yak may be the same, I do not know for sure. >>> >>> Doug >>> >>> On Thu, Mar 28, 2019 at 4:49 AM Pedro Cerveira Pinto wrote: >>> Hi there >>> Does anyone know if the cable that opens and close the shutters of the e ngine can be replaced by a marine teleflex cable? >>> Thanks >>> >>> -- >>> Pedro Cerveira Pinto >>> ________________________________ Message 4 _____________________________________ Time: 07:43:58 PM PST US From: Roger Kemp Subject: Re: Yak-List: Covering Ailerons of YAK To late Walt. I have one Aileron left to cover. Doc Sent from my iPad > On Mar 29, 2019, at 12:57 PM, Walter Lannon wrote: > > > Do yourself a huge favor Doc. Hire a pro. > > Cheers; > Walt > > > -----Original Message----- From: Roger Kemp Sent: Friday, March 29, 2019 7:02 AM To: yak-list@matronics.com Subject: Yak-List: Covering Ailerons of YAK > > Anybody done their on fabric on the YAK or CJ? > Doc > > Sent from my iPad > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > > > ________________________________ Message 5 _____________________________________ Time: 08:47:44 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Covering Ailerons of YAK That's great Doc. Hope it all works out well for you. Walt -----Original Message----- From: Roger Kemp Sent: Saturday, March 30, 2019 7:43 PM Subject: Re: Yak-List: Covering Ailerons of YAK To late Walt. I have one Aileron left to cover. Doc Sent from my iPad > On Mar 29, 2019, at 12:57 PM, Walter Lannon wrote: > > > Do yourself a huge favor Doc. Hire a pro. > > Cheers; > Walt > > > -----Original Message----- From: Roger Kemp Sent: Friday, March 29, 2019 > 7:02 AM To: yak-list@matronics.com Subject: Yak-List: Covering Ailerons of > YAK > > Anybody done their on fabric on the YAK or CJ? > Doc > > Sent from my iPad > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.