Today's Message Index:
----------------------
1. 05:21 AM - Re: Yak-List Digest: 3 Msgs - 02/07/20 (Greg Wrobel)
2. 05:33 AM - Re: Yak-List Digest: 3 Msgs - 02/07/20 (Greg Wrobel)
3. 10:08 AM - Re: Re: Yak-List Digest: 3 Msgs - 02/07/20 (Anthony Savarese)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 3 Msgs - 02/07/20 |
Not knowing what or how the bad mag was tested, is there any chance it's
could be the coil on the mag or perhaps the spring that pushes on the
contact button at the center of mag? Just thinking out loud.
Greg Wrobel
On Sat, Feb 8, 2020, 01:53 Yak-List Digest Server <yak-list@matronics.com>
wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 20-02-07&Archive=Yak
>
> Text Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 20-02-07&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Fri 02/07/20: 3
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 12:25 PM - Are Huosai magnetos "handed"? (jay-dub)
> 2. 01:21 PM - Re: Are Huosai magnetos "handed"? (Anthony Savarese)
> 3. 01:57 PM - Re: Are Huosai magnetos "handed"? (Anthony Savarese)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 12:25:03 PM PST US
> Subject: Yak-List: Are Huosai magnetos "handed"?
> From: "jay-dub" <flyjnw@gmail.com>
>
>
> I've just had mag failure (number 1) and have managed to source a
> replacement if
> necessary. I haven't had chance to diagnose yet so it may just be a short
> but
> if it does require replacement, are Huosai mags handed? As in are mag 1 and
> mag 2 the same or different? The answer determines the next steps.
>
> Thanks.
>
> --------
> CJ and Yak-52 owner
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=494698#494698
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 01:21:07 PM PST US
> From: Anthony Savarese <dsavarese0812@bellsouth.net>
> Subject: Re: Yak-List: Are Huosai magnetos "handed"?
>
>
> Mags are interchangeable left to right/right to left.
> Check the high voltage stick for arcing On the sides. This will cause the
> mag to
> become inop. Do this b4 you replace the entire mag.
> Dennis
>
>
> Sent from my iPhone
>
> > On Feb 7, 2020, at 3:27 PM, jay-dub <flyjnw@gmail.com> wrote:
> >
> >
> > I've just had mag failure (number 1) and have managed to source a
> replacement
> if necessary. I haven't had chance to diagnose yet so it may just be a
> short
> but if it does require replacement, are Huosai mags handed? As in are mag
> 1 and
> mag 2 the same or different? The answer determines the next steps.
> >
> > Thanks.
> >
> > --------
> > CJ and Yak-52 owner
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=494698#494698
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> ________________________________ Message 3
> _____________________________________
>
>
> Time: 01:57:05 PM PST US
> From: Anthony Savarese <dsavarese0812@bellsouth.net>
> Subject: Re: Yak-List: Are Huosai magnetos "handed"?
>
>
> Also make sure the points are opening and closing. If the points dont
> open, the
> mag will be dead.
> Dennis
>
> Sent from my iPhone
>
> > On Feb 7, 2020, at 4:22 PM, Anthony Savarese <
> dsavarese0812@bellsouth.net> wrote:
> >
> >
> > Mags are interchangeable left to right/right to left.
> > Check the high voltage stick for arcing On the sides. This will cause
> the mag
> to become inop. Do this b4 you replace the entire mag.
> > Dennis
> >
> >
> > Sent from my iPhone
> >
> >> On Feb 7, 2020, at 3:27 PM, jay-dub <flyjnw@gmail.com> wrote:
> >>
> >>
> >> I've just had mag failure (number 1) and have managed to source a
> replacement
> if necessary. I haven't had chance to diagnose yet so it may just be a
> short
> but if it does require replacement, are Huosai mags handed? As in are mag
> 1 and
> mag 2 the same or different? The answer determines the next steps.
> >>
> >> Thanks.
> >>
> >> --------
> >> CJ and Yak-52 owner
> >>
> >>
> >>
> >>
> >> Read this topic online here:
> >>
> >> http://forums.matronics.com/viewtopic.php?p=494698#494698
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 3 Msgs - 02/07/20 |
Oops, I said spring pushing on the contact button on the MAG. That's
actually located at the center of distributor cap. My Bad. The contact
button should move freely to provide constant pressure on the rotor that is
on the MAG. Dang I wish I knew what I was talking about sometimes!
Greg Wrobel
On Sat, Feb 8, 2020, 01:53 Yak-List Digest Server <yak-list@matronics.com>
wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 20-02-07&Archive=Yak
>
> Text Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 20-02-07&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Fri 02/07/20: 3
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 12:25 PM - Are Huosai magnetos "handed"? (jay-dub)
> 2. 01:21 PM - Re: Are Huosai magnetos "handed"? (Anthony Savarese)
> 3. 01:57 PM - Re: Are Huosai magnetos "handed"? (Anthony Savarese)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 12:25:03 PM PST US
> Subject: Yak-List: Are Huosai magnetos "handed"?
> From: "jay-dub" <flyjnw@gmail.com>
>
>
> I've just had mag failure (number 1) and have managed to source a
> replacement if
> necessary. I haven't had chance to diagnose yet so it may just be a short
> but
> if it does require replacement, are Huosai mags handed? As in are mag 1 and
> mag 2 the same or different? The answer determines the next steps.
>
> Thanks.
>
> --------
> CJ and Yak-52 owner
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=494698#494698
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 01:21:07 PM PST US
> From: Anthony Savarese <dsavarese0812@bellsouth.net>
> Subject: Re: Yak-List: Are Huosai magnetos "handed"?
>
>
> Mags are interchangeable left to right/right to left.
> Check the high voltage stick for arcing On the sides. This will cause the
> mag to
> become inop. Do this b4 you replace the entire mag.
> Dennis
>
>
> Sent from my iPhone
>
> > On Feb 7, 2020, at 3:27 PM, jay-dub <flyjnw@gmail.com> wrote:
> >
> >
> > I've just had mag failure (number 1) and have managed to source a
> replacement
> if necessary. I haven't had chance to diagnose yet so it may just be a
> short
> but if it does require replacement, are Huosai mags handed? As in are mag
> 1 and
> mag 2 the same or different? The answer determines the next steps.
> >
> > Thanks.
> >
> > --------
> > CJ and Yak-52 owner
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=494698#494698
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> ________________________________ Message 3
> _____________________________________
>
>
> Time: 01:57:05 PM PST US
> From: Anthony Savarese <dsavarese0812@bellsouth.net>
> Subject: Re: Yak-List: Are Huosai magnetos "handed"?
>
>
> Also make sure the points are opening and closing. If the points dont
> open, the
> mag will be dead.
> Dennis
>
> Sent from my iPhone
>
> > On Feb 7, 2020, at 4:22 PM, Anthony Savarese <
> dsavarese0812@bellsouth.net> wrote:
> >
> >
> > Mags are interchangeable left to right/right to left.
> > Check the high voltage stick for arcing On the sides. This will cause
> the mag
> to become inop. Do this b4 you replace the entire mag.
> > Dennis
> >
> >
> > Sent from my iPhone
> >
> >> On Feb 7, 2020, at 3:27 PM, jay-dub <flyjnw@gmail.com> wrote:
> >>
> >>
> >> I've just had mag failure (number 1) and have managed to source a
> replacement
> if necessary. I haven't had chance to diagnose yet so it may just be a
> short
> but if it does require replacement, are Huosai mags handed? As in are mag
> 1 and
> mag 2 the same or different? The answer determines the next steps.
> >>
> >> Thanks.
> >>
> >> --------
> >> CJ and Yak-52 owner
> >>
> >>
> >>
> >>
> >> Read this topic online here:
> >>
> >> http://forums.matronics.com/viewtopic.php?p=494698#494698
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 3 Msgs - 02/07/20 |
Anything is possible.
Dennis
Sent from my iPhone
> On Feb 8, 2020, at 8:23 AM, Greg Wrobel <clouddog22@gmail.com> wrote:
>
> =EF=BB
> Not knowing what or how the bad mag was tested, is there any chance it's c
ould be the coil on the mag or perhaps the spring that pushes on the contact
button at the center of mag? Just thinking out loud.
>
> Greg Wrobel
>
>> On Sat, Feb 8, 2020, 01:53 Yak-List Digest Server <yak-list@matronics.com
> wrote:
>> *
>>
>> ========================
>> Online Versions of Today's List Digest Archive
>> ========================
>>
>> Today's complete Yak-List Digest can also be found in either of the
>> two Web Links listed below. The .html file includes the Digest formatted
>> in HTML for viewing with a web browser and features Hyperlinked Indexes
>> and Message Navigation. The .txt file includes the plain ASCII version
>> of the Yak-List Digest and can be viewed with a generic text editor
>> such as Notepad or with a web browser.
>>
>> HTML Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=h
tml&Chapter 20-02-07&Archive=Yak
>>
>> Text Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=t
xt&Chapter 20-02-07&Archive=Yak
>>
>>
>> ======================
>> EMail Version of Today's List Digest Archive
>> ======================
>>
>>
>> ----------------------------------------------------------
>> Yak-List Digest Archive
>> ---
>> Total Messages Posted Fri 02/07/20: 3
>> ----------------------------------------------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> 1. 12:25 PM - Are Huosai magnetos "handed"? (jay-dub)
>> 2. 01:21 PM - Re: Are Huosai magnetos "handed"? (Anthony Savarese)
>> 3. 01:57 PM - Re: Are Huosai magnetos "handed"? (Anthony Savarese)
>>
>>
>>
>> ________________________________ Message 1 ____________________________
_________
>>
>>
>> Time: 12:25:03 PM PST US
>> Subject: Yak-List: Are Huosai magnetos "handed"?
>> From: "jay-dub" <flyjnw@gmail.com>
>>
>>
>> I've just had mag failure (number 1) and have managed to source a replace
ment if
>> necessary. I haven't had chance to diagnose yet so it may just be a short
but
>> if it does require replacement, are Huosai mags handed? As in are mag 1 a
nd
>> mag 2 the same or different? The answer determines the next steps.
>>
>> Thanks.
>>
>> --------
>> CJ and Yak-52 owner
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=494698#494698
>>
>>
>> ________________________________ Message 2 ____________________________
_________
>>
>>
>> Time: 01:21:07 PM PST US
>> From: Anthony Savarese <dsavarese0812@bellsouth.net>
>> Subject: Re: Yak-List: Are Huosai magnetos "handed"?
>>
>>
>> Mags are interchangeable left to right/right to left.
>> Check the high voltage stick for arcing On the sides. This will cause the
mag to
>> become inop. Do this b4 you replace the entire mag.
>> Dennis
>>
>>
>> Sent from my iPhone
>>
>> > On Feb 7, 2020, at 3:27 PM, jay-dub <flyjnw@gmail.com> wrote:
>> >
>> >
>> > I've just had mag failure (number 1) and have managed to source a repla
cement
>> if necessary. I haven't had chance to diagnose yet so it may just be a sh
ort
>> but if it does require replacement, are Huosai mags handed? As in are mag
1 and
>> mag 2 the same or different? The answer determines the next steps.
>> >
>> > Thanks.
>> >
>> > --------
>> > CJ and Yak-52 owner
>> >
>> >
>> >
>> >
>> > Read this topic online here:
>> >
>> > http://forums.matronics.com/viewtopic.php?p=494698#494698
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>> ________________________________ Message 3 ____________________________
_________
>>
>>
>> Time: 01:57:05 PM PST US
>> From: Anthony Savarese <dsavarese0812@bellsouth.net>
>> Subject: Re: Yak-List: Are Huosai magnetos "handed"?
>>
>>
>> Also make sure the points are opening and closing. If the points dont ope
n, the
>> mag will be dead.
>> Dennis
>>
>> Sent from my iPhone
>>
>> > On Feb 7, 2020, at 4:22 PM, Anthony Savarese <dsavarese0812@bellsouth.n
et> wrote:
>> >
>> >
>> > Mags are interchangeable left to right/right to left.
>> > Check the high voltage stick for arcing On the sides. This will cause t
he mag
>> to become inop. Do this b4 you replace the entire mag.
>> > Dennis
>> >
>> >
>> > Sent from my iPhone
>> >
>> >> On Feb 7, 2020, at 3:27 PM, jay-dub <flyjnw@gmail.com> wrote:
>> >>
>> >>
>> >> I've just had mag failure (number 1) and have managed to source a repl
acement
>> if necessary. I haven't had chance to diagnose yet so it may just be a sh
ort
>> but if it does require replacement, are Huosai mags handed? As in are mag
1 and
>> mag 2 the same or different? The answer determines the next steps.
>> >>
>> >> Thanks.
>> >>
>> >> --------
>> >> CJ and Yak-52 owner
>> >>
>> >>
>> >>
>> >>
>> >> Read this topic online here:
>> >>
>> >> http://forums.matronics.com/viewtopic.php?p=494698#494698
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>> ==========
>> br> fts!)
>> r> > rel="noreferrer noreferrer" target="_blank">http://www.matronics
.com/contribution
>> -Matt Dralle, List Admin.
>> ==========
>> List" rel="noreferrer noreferrer" target="_blank">http://www.matronic
s.com/Navigator?Yak-List
>> ==========
>> FORUMS -
>> eferrer noreferrer" target="_blank">http://forums.matronics.com
>> ==========
>> WIKI -
>> errer noreferrer" target="_blank">http://wiki.matronics.com
>> ==========
>> b Site -
>> -Matt Dralle, List Admin.
>> rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/
contribution
>> ==========
>>
>>
>>
>>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|