---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Thu 06/18/20: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:17 AM - Cylinder Head Temperature Gages (Clouddog) 2. 01:26 PM - Need gear actuator seal. (motoadve) 3. 08:53 PM - Re: Need gear actuator seal. (Walter Lannon) ________________________________ Message 1 _____________________________________ Time: 07:17:52 AM PST US Subject: Yak-List: Cylinder Head Temperature Gages From: "Clouddog" I have a stock Housai with one cylinder head temp probe on the #4 cylinder reading in the front cockpit and one on the #1 cylinder reading in the rear cockpit. Nether sparkplug has the crush washer installed. The rear gage has always read 20 degrees cooler which is normal but both were rock solid. I have cleaned the rings that go under the spark plug and made sure the wiring forward of firewall looked normal. These should be two independent readings going to two different gages or so I think. During flight, both gage readings are low and varying constantly on both gages. When i shut down, both gages read steady and normal. What would cause both gages to act stupid and then settle down after aircraft is shut down? I would think they are grounding out on the frame due to vibration during the time the engine is running but BOTH!! There has got to be a common connection I would think causing both gages to behave similar. Greg "Clouddog " Wrobel Read this topic online here: http://forums.matronics.com/viewtopic.php?p=496909#496909 ________________________________ Message 2 _____________________________________ Time: 01:26:07 PM PST US Subject: Yak-List: Need gear actuator seal. From: "motoadve" Need the seal for the landing gear actuator, Doug Sapp does not have them in stock at the moment.Anyone has a spare that can sell it to me? -------- www.Backcountry182.com Cessna 182 P CJ -6 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=496915#496915 ________________________________ Message 3 _____________________________________ Time: 08:53:16 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Need gear actuator seal. Possibly may have one but which actuator? Suggest you send Parts Cat. page with item identified. Walt wlannon@shaw.ca -----Original Message----- From: motoadve Sent: Thursday, June 18, 2020 1:23 PM Subject: Yak-List: Need gear actuator seal. Need the seal for the landing gear actuator, Doug Sapp does not have them in stock at the moment.Anyone has a spare that can sell it to me? -------- www.Backcountry182.com Cessna 182 P CJ -6 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=496915#496915 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.