---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Thu 05/20/21: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:33 PM - Re: spare exhaust stack? (Justin Drafts) 2. 09:03 PM - Re: Re: spare exhaust stack? (Walter Lannon) 3. 09:18 PM - Re: Re: spare exhaust stack? (Walter Lannon) 4. 09:40 PM - Re: Re: spare exhaust stack? (Justin Drafts) 5. 09:44 PM - Re: Re: spare exhaust stack? (Justin Drafts) 6. 10:28 PM - Re: Re: spare exhaust stack? (Walter Lannon) ________________________________ Message 1 _____________________________________ Time: 04:33:29 PM PST US From: Justin Drafts Subject: Yak-List: Re: spare exhaust stack? Ok friends, Installing my new exhaust rings (thanks Doug) today, I noticed my 1 remaining carbon-steel tube section has developed a hole. See pic... Thankfully there was no other damage to the engine and I discovered it on the ground, not in the air. (All other sections are stainless and in good condition.) Doug is unfortunately 0-stock. Does anyone have a spare p/n *H2-6811-300 *section to sell? (L/H side, cylinder #3, 2nd section from the top.) I'd take a Chinese one in good condition at this point, just to get flying again. ??? Thanks, Justin Drafts/N280NC ________________________________ Message 2 _____________________________________ Time: 09:03:14 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Re: spare exhaust stack? From: Justin Drafts Sent: Thursday, May 20, 2021 4:32 PM Subject: Yak-List: Re: spare exhaust stack? Ok friends, Installing my new exhaust rings (thanks Doug) today, I noticed my 1 remaining carbon-steel tube section has developed a hole. See pic... Thankfully there was no other damage to the engine and I discovered it on the ground, not in the air. (All other sections are stainless and in good condition.) Doug is unfortunately 0-stock. Does anyone have a spare p/n H2-6811-300 section to sell? (L/H side, cylinder #3, 2nd section from the top.) I'd take a Chinese one in good condition at this point, just to get flying again. ??? Thanks, Justin Drafts/N280NC ________________________________ Message 3 _____________________________________ Time: 09:18:59 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Re: spare exhaust stack? Justin: Windows just dumped my email =93 too large. Will trim down and try again. From: Justin Drafts Sent: Thursday, May 20, 2021 4:32 PM Subject: Yak-List: Re: spare exhaust stack? Ok friends, Installing my new exhaust rings (thanks Doug) today, I noticed my 1 remaining carbon-steel tube section has developed a hole. See pic... Thankfully there was no other damage to the engine and I discovered it on the ground, not in the air. (All other sections are stainless and in good condition.) Doug is unfortunately 0-stock. Does anyone have a spare p/n H2-6811-300 section to sell? (L/H side, cylinder #3, 2nd section from the top.) I'd take a Chinese one in good condition at this point, just to get flying again. ??? Thanks, Justin Drafts/N280NC ________________________________ Message 4 _____________________________________ Time: 09:40:05 PM PST US From: Justin Drafts Subject: Re: Yak-List: Re: spare exhaust stack? Walt! I think you're about to become my new hero, if 1 of these is available?? Justin On Thu, May 20, 2021 at 9:27 PM Walter Lannon wrote: > Justin: > > Windows just dumped my email =93 too large. Will trim down and try again. > > *From:* Justin Drafts > *Sent:* Thursday, May 20, 2021 4:32 PM > *To:* yak-list@matronics.com > *Subject:* Yak-List: Re: spare exhaust stack? > > Ok friends, > Installing my new exhaust rings (thanks Doug) today, I noticed my 1 > remaining carbon-steel tube section has developed a hole. See pic... > Thankfully there was no other damage to the engine and I discovered it on > the ground, not in the air. > (All other sections are stainless and in good condition.) > > Doug is unfortunately 0-stock. > > Does anyone have a spare p/n *H2-6811-300 *section to sell? > (L/H side, cylinder #3, 2nd section from the top.) > > I'd take a Chinese one in good condition at this point, just to get flyin g > again. > ??? > > Thanks, > Justin Drafts/N280NC > ________________________________ Message 5 _____________________________________ Time: 09:44:14 PM PST US From: Justin Drafts Subject: Re: Yak-List: Re: spare exhaust stack? Great pix, thanks for the reply... folks have been advising I seek out a weld shop, but I'd prefer to R&R the stack segment with a new-as-possible replacement if at all possible. Justin On Thu, May 20, 2021 at 9:39 PM Justin Drafts wrote: > Walt! > I think you're about to become my new hero, if 1 of these is available?? > Justin > > On Thu, May 20, 2021 at 9:27 PM Walter Lannon wrote: > >> Justin: >> >> Windows just dumped my email =93 too large. Will trim down and tr y again. >> >> *From:* Justin Drafts >> *Sent:* Thursday, May 20, 2021 4:32 PM >> *To:* yak-list@matronics.com >> *Subject:* Yak-List: Re: spare exhaust stack? >> >> Ok friends, >> Installing my new exhaust rings (thanks Doug) today, I noticed my 1 >> remaining carbon-steel tube section has developed a hole. See pic... >> Thankfully there was no other damage to the engine and I discovered it o n >> the ground, not in the air. >> (All other sections are stainless and in good condition.) >> >> Doug is unfortunately 0-stock. >> >> Does anyone have a spare p/n *H2-6811-300 *section to sell? >> (L/H side, cylinder #3, 2nd section from the top.) >> >> I'd take a Chinese one in good condition at this point, just to get >> flying again. >> ??? >> >> Thanks, >> Justin Drafts/N280NC >> > ________________________________ Message 6 _____________________________________ Time: 10:28:30 PM PST US From: "Walter Lannon" Subject: Re: Yak-List: Re: spare exhaust stack? Hi Justin; You might as well have a new one. Don=99t know what it=99s worth. Just make me a reasonable offer. At a guess you should probably add about $40? for insured shipping. I will throw in the other set of special nuts for you (presume they never showed up). In case you may have wondered why I removed these from my CJ. I just hate having things in front of me that could punch new holes in my head in the event of a real bad day! Best; Walt From: Justin Drafts Sent: Thursday, May 20, 2021 9:43 PM Subject: Re: Yak-List: Re: spare exhaust stack? Great pix, thanks for the reply... folks have been advising I seek out a weld shop, but I'd prefer to R&R the stack segment with a new-as-possible replacement if at all possible. Justin On Thu, May 20, 2021 at 9:39 PM Justin Drafts wrote: Walt! I think you're about to become my new hero, if 1 of these is available?? Justin On Thu, May 20, 2021 at 9:27 PM Walter Lannon wrote: Justin: Windows just dumped my email =93 too large. Will trim down and try again. From: Justin Drafts Sent: Thursday, May 20, 2021 4:32 PM To: yak-list@matronics.com Subject: Yak-List: Re: spare exhaust stack? Ok friends, Installing my new exhaust rings (thanks Doug) today, I noticed my 1 remaining carbon-steel tube section has developed a hole. See pic... Thankfully there was no other damage to the engine and I discovered it on the ground, not in the air. (All other sections are stainless and in good condition.) Doug is unfortunately 0-stock. Does anyone have a spare p/n H2-6811-300 section to sell? (L/H side, cylinder #3, 2nd section from the top.) I'd take a Chinese one in good condition at this point, just to get flying again. ??? Thanks, Justin Drafts/N280NC ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.